Frage von MiXMaster:
Hi All,
have the following problem:
I created a movie of 1 hour 17 and would like to recognize them burn to a DVD (burner) was. The first pass works fine, the second rendering studio 9 remains always be on 38:12. Since I have only closed the scene of an error, I just solved the partial section. The next attempt Render Studio 9 again remained standing at 38:12. A temporal problem, I've ruled out, as I let run the calculator over night but with the same result.
Has anyone an idea what's wrong with my rendering process, error messages, of Studio 9 will not be compensated.
Thank you in advance
Bernd
Antwort von Kiara Borini:
What happens exactly when the 38:12? Transition? Change the sound file? Plate (with the 'Auxiliary Files ") full?
In such situations, I save the project, delete all the temp files (and those of the other projects are no longer needed) and let rendering of the new. Most of the miracles ...
Antwort von MiXMaster:
Hi Kiara,
the controller always remains with the timeline to be 38:12.
(Middle) in a scene with no transition, or Audio Soundtrack.
The hard drive is not running fully synonymous, since the movie requires 12.4 GB and almost
40GB available.
Gruß Bernd
Antwort von Kiara Borini:
Hello Bernd,
OK, I think it is time that there's enough space at all temp partitions that exist in your system so.
Perhaps when capturing a frame has been stored so corrupt that this Pinnacle is now simply skips when decoding, but is ausbeißt teeth.
Save the project under a name other times. Go to the Zeitaches to the position just before the error (2 frames, to be sure.) Here and cut with a razor. Then next 4 frames, safety and cut again. The resulting mini-clip delete. Is it possible to render the film now?
If so, decide whether the corresponding clip once captured, or whether one renounces one to two frames. You may repeat the last and first frame s.der fracture.
Maybe it is better to s.einer another place to cut and omit a slightly larger sequence. Should be synonymous with movie masters have happened to be ;-)
Before, I would still try a small project with this clip.
In a Projket with Premiere it was with me ma similar, and wanted a job did not succeed. Then I have the body in question simply rendered as a separate project as an AVI and then inserted as a clip.
(Please excuse typos ichzu, my cat is half the Tastarur and I have quite some ergonomically incorrect around them, partly through her reach under to get s.The keyboard ...)
Antwort von peterreichert:
Hello,
exactly the problem I have now with Studio 10 Pros.
Every time you render a different result: always uses a random place, where the rendering stops.
Real shame that Pinnacle does not work, because the ergonomics are so good.
Competitive software has a remarkable way never Render problems.
I hope that Pinnacle is responsible for the fixes!
Or we are both alone with these problems? :-)
Greeting
Peter
Antwort von Wolfgang Gottschalk:
I have a rendering problem synonymous. Always s.einer body (2. rendering pass, about 1:15 hours) depends on the rendering. No error message, endless loop, no CPU utilization. Just goes cancel. Studio will then ruled as usual.
I am completely baffled. Can man can make the rendering of other programs? Gibts cheap alternatives to the studio, the synonymous support the Pinnacle card?
With regards questioning
Wolfgang
Antwort von marcel:
Have the same problem and can not solve it form'm crazy! There is another program where I can render my filnm and can burn to dvd??
Antwort von Linus van Pelt:
Hello all together,
I was confronted with a film of an acquaintance with the following problem:
Pinnacle Studio 9.4.7 and 10.5 synonymous broke off at the movie creation
- No preference whether a DVD or MPEG. The bodies were not clean
reproducible, but always right in the film and close to the same
Place.
There were
no more hits after getting caught
on the
hard drive instead, which
showed only low CPU utilization. The
Files in the temporary directory changed not more. (Come to someone familiar?)
The project consisted of about 500 scenes with Pinnacle Studio 9
of a digital camera were recorded. After so much hard work, of course s.ein new reading of the films was no longer thought of.
After a closer look showed the following symptoms:
Video files (*. m2v are) clean, and were created as long as the movie should be. The soundtrack, however, broke off.
A brief analysis with VirtualDub, the Swiss army knife for movies
http://www.virtualdub.org/) bestätigte die murksige Soundtrack.
So - die Lösung dieses Problems verrate ich morgen ... war nur ein
Witz...
Die Aufgabe ist also die Soundtrack zu korrigieren ohne die Videoframes zu verändern, damit die Schnitte im Project noch stimmen.
Also raus aus Studio and
(1) Ursprünglichen Film umbenennen (ORG.AVI -> TEMP.AVI)
(2) TEMP.AVI in VirtualDub laden and sich mal unter FILE -> File
Informationen sich die Audio and Video Päckchen merken
(3) Folgende Einstellungen setzen: (A) VIDEO -> Direct stream copy
and (B) AUDIO -> Source Audio
(and AUDIO -> Full processing mode
(4) file under the old name in the same directory store:
FILE -> Save s.avi (ORG.AVI)
(5) ORG.AVI load into VirtualDub and views on FILE -> File
Information, the audio and video packages compare.
If you did everything right the next time one of
Have foisted on the studio program an intact film with the same number of video frames and audio track of functioning.
After 80min, the Project could be easily from 500 scenes
. render The soundtrack in the result was perfect.
Botched video tracks can be edited by analogy.
Whether it's always helps, I do not know, but it is an attempt
perhaps worth it.
Novel, much success, feedback welcome!
ciao Linus
Antwort von bloodykeeper:
Hello,
using Studio 9 and now I have edited together a film with just under 75min film, synonymous, everything went fairly well ... but now I want to render the movie, and although as mpg, and the compatibility of DVD ... but he always breaks in 38min and 33sec. I now have three times and always the same druchlaufen TIME ... The scene had changed twice, last at the first time the transition and the second time a very different scene without a transitional period in the luggage, and each time he breaks off at 38.33 ... just WHY?? I then views the film VCD format rendering times and since it worked ... only in DVD-compatible format ... NOT a solution to the problem would be grateful ....
gruß
Antwort von Hollgo:
Have you after 1 an unsuccessful attempt to render the auxiliary files (in the Auxiliary Files folder) deleted?
Should we make on studio following an unsuccessful attempt to render ever since Studio else stumbles again at the next attempt on the auxiliary files of the failed project.
Antwort von prince004:
Hello, I have the same problem ... synonymous
I have now deleted the files in the alternative, but it's still not ... It breaks s.der always the same places ...
Antwort von Cyclops:
The problem I have with almost every film. Make a note of the exact spot where hangs Pinnacle and then splits the clip s.dieser place. Now makes it a project with all the clips before and after the one with all the cut. Then she created two projects (in. Avi or. Mpg) and invites the two half-movies back into the program. Substituting these together and create (or burn) the film again.
Antwort von Irion Verzweifelt:
Hello all together,
I was confronted with a film of an acquaintance with the following problem:
Pinnacle Studio 9.4.7 and 10.5 synonymous broke off at the movie creation
- No preference whether a DVD or MPEG. The bodies were not clean
reproducible, but always right in the film and close to the same
Place.
There were no more hits after getting caught on the
hard drive instead, which showed only low CPU utilization. The
Files in the temporary directory changed not more.
(Come to someone familiar?)
The project consisted of about 500 scenes with Pinnacle Studio 9
of a digital camera were recorded. After so much hard work, of course s.ein new reading of the films was no longer thought of.
After a closer look showed the following symptoms:
Video files (*. m2v are) clean, and were created as long as the movie should be. The soundtrack, however, broke off.
A brief analysis with VirtualDub, the Swiss army knife for movies http://www.virtualdub.org/ ) bestätigte die murksige Soundtrack.
So - die Lösung dieses Problems verrate ich morgen ... war nur ein
Witz...
Die Aufgabe ist also die Soundtrack zu korrigieren ohne die Videoframes zu verändern, damit die Schnitte im Project noch stimmen.
Also raus aus Studio and
(1) Ursprünglichen Film umbenennen (ORG.AVI -> TEMP.AVI)
(2) TEMP.AVI in VirtualDub laden and sich mal unter FILE -> File
Informationen sich die Audio and Video Päckchen merken
(3) Folgende Einstellungen setzen: (A) VIDEO -> Direct stream copy
and (B) AUDIO -> Source Audio (and AUDIO -> Full processing mode
(4) file under the old name in the same directory store:
FILE -> Save s.avi (ORG.AVI)
(5) ORG.AVI load into VirtualDub and views on FILE -> File
Information, the audio and video packages compare.
If you did everything right the next time one of
Have foisted on the studio program an intact film with the same number of video frames and audio track of functioning.
After 80min, the Project could be easily from 500 scenes
. render The soundtrack in the result was perfect.
Botched video tracks can be edited by analogy.
Whether it's always helps, I do not know, but it is an attempt
perhaps worth it.
Novel, much success, feedback welcome!
ciao Linus
Hello Linus!
After 3 successful projects, I've cracked the last 2 years, a tough nut. I had to let me have half a year Pinnacle break, because I no longer next kam.Habe Ziehmlich so all the tips I found on Pinnacleforen through.
Have synonymous with the problem that the rendering "always" hangs at exactly half, no preference as long as I mache.Mein complete movie is the scene in 70 minutes and remains at 35 hängen.Habe countless attempts to a length of 1 min arbitrarily along the same gestellt.Das results at 30 sec is to render possible.
To exclude certain things the same time, the following information:
Tested on 3 PCs (one even bought new), the same result.
I-Ext.Harddisks synonymous getestet.Also enough space enough.
-In the 3 successful shoot, I'm just as taken, as with the problem project.
-I still have the same camcorder for the film.
-Have all Temp render files deleted before I started a new experiment. Or is there still a place on the PC, hiding where these files or can not be completely clear, and causing the problem?
Besides these, I have put together a slideshow with digital images, with normal crossings and provided background music. Exactly the same problem.
Now I have read your post and was cleared at a time not being rendered piece of test film, the background music that I hatte.Siehe on the music track there, the piece of film could be rende
Antwort von Andreas_Kiel:
Hi,
Render problems with it sometimes is in dropped frames. Unfortunately, sometimes hanging Studio synonymous, for unknown reasons other, as described.
I had the error in a larger project and, despite support *) found no solution. Since I had no time constraints, I could make out the following:
- When capturing you look at very carefully, how many frames are dropped. Dropped Frames = stress in studio!
- Man fundamentally beschissensten rendere first time in the quality of which is adjustable. This saves a lot of stress after a night durchrenderten ;-)
- It sometimes helps to remove the transitions before and after the clip that hangs in the studio, too. Whether you can reset, I have not tried it yet.
- It should fade (and all other effects) can never (!!!! never!) With copy & paste reuse, just because you once on the right track or has it trimmed and is too lazy to blend the new with each set. Instead, one gets the ever anew from the tool palette.
- Who sets mistakenly transitions s.dieselbe place, and can render forgotten. In the next clip studio will leave.
I have at least removed the muzzle of this product fully. Even a seemingly flawless rendering sometimes produces shitty results. Just the other day in a 7-minute clip, I had) s.zwei different places "Stillimage", once full eight seconds (scene length. The rendering process for each agency, despite always s.derselben perfect material ...
This crappy software will soon end up on ebay. I will probably switch to Sony Vegas.
BG
Andreas
*) Support? Toller support :-(
Antwort von azo+:
Hello Andreas!
That with the new program I would have taken a long time to attack if someone could assure me that this work without a problem würde.Außerdem I now have so much time with overcook the movies that I want to get him now just finished.
I do not quite understand how I can look at capturing how many frames are dropped. Dropped Frames = stress in studio! (I beg your exact procedure)
With the copy I have only on video-gemacht. But with my 3 successful shoot I did it synonymous.
Why does the rendering of "all" attempts no preference how short the project is (eg. 4 clips with 3 transitions with music track, the whole 1 minute) Did Copies nix, nix snipped, no Titel.Trozdem will render at exactly half, at 30 sec hang.
Do you have previous experience or a positive report about Sony Vegas? How much does the program?
What do you think of Canopus Edios?
Greeting Irion
Antwort von azo+:
if I could assure one that this would work without a problem
The one you will never be able to say for sure.
Pinnacle has so few "einegbaute bugs" that can affect more fatal to the system. The basic rule: short clips, no complex 3D effects and possible no sound files to import.
@ Dropped frames: One way of so-called "omitted to avoid frames" while reading the video footage would be to ensure that the PC is not absurdly busy with other things in the background, ie for example no virus scanner run.
Loading times but you download from the Adobe website, the free trial version of Premiere Elements. I think this might be a useful alternative to Pinnacle.
Antwort von heino 2:
Hello,
I've been working for over two years with Pinnacle Liquid and never had any problems. Rises. It's worth it.
Regards
Heino 2
Antwort von Andreas_Kiel:
That with the new program I would have taken a long time in attack if someone could assure me that this would work without problems.
I would be synonymous of version 8 no longer changed to 9 and then again at 10 (which then because HDV), if I had been there as smart as it is now! Pi ** nackel since delivers always the same error with new version numbers, now is my neck of the burst. The cutting and editing is all well and good: because I am still not abgesemmelt version, but up in the morning and see that this wretched piece of ****** and ****** Something is again abgek * ... thank you very much synonymous!
I do not quite understand how I can look at capturing how many frames are dropped. Dropped Frames = stress in studio! (I beg your exact procedure)
That is during the capture process, right below the preview window in Studio. Would be equally at version 9. One can somehow synonymous approached a log file s.diese indication, but I've never experienced before.
With the copy I have only on video-gemacht. But with my 3 successful shoot I did it synonymous.
You have just completed the definition of "erratic behavior sloppy software found" ;-)
Why does the rendering of "all" attempts no preference how short the project is (eg. 4 clips with 3 transitions with music track, the whole 1 minute) Did Copies nix, nix snipped, no Titel.Trozdem will render at exactly half, at 30 sec hang.
No clue, unfortunately. The support told me once that there must be a 256MB graphics card available. Again, this upgrade was in vain. In your case possibly capture new.
Do you have previous experience or a positive report about Sony Vegas? How much does the program?
Loading Sonydie demo at you down (30 days). Myself have just started to play in it "." Seems to be much faster, renders synonymous fixed. Handling to get used to (well, Newcomers halt).
You'll get it amazon for less than 90 euros for example.
What do you think of Canopus Edios?
No idea: a good friend works with it and may never replace again (but only in DVCAM, HDV, although he has, he uses but not yet).
BG
Andreas
Irion salute [/ quote]
Antwort von Alfthe1st:
Hm so I do not understand. I have included here are now 21 movies of your camcorder to AVI. With the converted scene processing, and even then overdubbed of AVI to DVD. So that always sparked the 21 shooting. The only times where I had problems was when the software is simple s.Anfang stopped incrementing the splash screen.
After restarting the computer but it was eaten.
I am leaving here with a P4 3.00 GHz. With MSI X1600 graphics card with 1.5 gig DDR PC3200 (400MHz) and two 500 GB Samsung SATA I hard disks and Pinnacle Studio 10.8.
Everything is taken from the camcorder via Firewire, and then stored on the second disk as AVI. The scenes are not processed as a whole, but in different scenes. Then should you know when you put a film of the CAM on the calculator. Storyboard is so important. As I said never had any Probs with the thing and find the software remains Spitzenmäßig because they are very intuitive and easy to carry out the work.
Greetz
Alex
Antwort von Andreas_Kiel:
@ Dropped frames: One way of so-called "omitted to avoid frames" while reading the video footage would be to ensure that the PC is not absurdly busy with other things in the background, ie for example no virus scanner run.
So, now I switched to Sony Vegas Movie Studio 8. I just caught a 20-minute Project and rebuilt, created by capturing (Pinnacle files that others can not read ... toll Programs) about arranging, etc., etc. In a clip of HDVSplit found 18 frame drops . ... Pinnacle was not reproducibly stops the display there from scratch ... a SUPER product >:(=)
I can only plead for change, who wants to remain faithful to P., it should at least get his raw material in other ways into the PC.
BG
Andreas
