Frage von Budoudo:
Hi,
I just got my slider plate back, which I had handed over to a company for cutting the 3 / 8 "thread.
Now this has me a jerk 5 / 8 "instead of a 3 / 8" thread ... I could go crazy Sliced!!
What would you do, I have a Manfrotto 701HDV head, which of course has a 3 / 8 "thread ...
Thanks for your tips.
Greeting
Budoudo
Antwort von frm:
If you have it in writing that the company will cut a 3 / 8 and the company has not done this you can of course anterior damages or repairs to the company.
What does the company? Have you already registered with them?
HG
Florian
Antwort von gast3:
so that the hole is now about 5mm larger than it should be, a reduction ring as in tripod threads (of 3 / "to 1 / 4") are unfortunately not 8th
So you can probably only so close to it as possible, drill your desired thread, if you get the rail is not replaced, then probably it is clear from the middle, but that will not be so bad, right?
You must be careful not synonymous to the thread pitch, it is synonymous 3 / 8 "fine thread, I mean at mündlichr order, is again what else besides.
Antwort von Herbert@S:
Then you have to make a threaded bushing - outside with 5 / 8 "thread and in 3 / 8" thread. Which is then eingklebt that they no longer rausdreht.
Or do you tighten the screw with the head thread, the two is even easier!
When the head is screwed in both cases you see any difference or anything.
Greetings Herbert
Antwort von Budoudo:
Have you already registered with them?
Hi,
No not yet, was so "shocked" when I unpacked the plate, but that will come. Account the need to put me in any case, no.
've Threaded sleeve / adapter 3 / 8 "to 1 / 4" inch found 5 / 8 "to 3 / 8", it actually seems to be missing. Let's see how I get down again, in an emergency in order Igus a new record ^ ^.
Greeting
Budoudo
Antwort von Alf_300:
It should not a problem for the company constitute a suitable box to fit. glued with Loctite is practically the same as original
Antwort von Budoudo:
Now I have still found something that would actually work:
http://shop.kirstein.de/shop/default.aspx?TY=item&ST=1&IT=4553&CT=499&utm_source=preisroboter.de&utm_medium=cpc
Antwort von Alf_300:
Amazon gives (and others) synonymous
http://www.amazon.de/KM-217-Reduziergewinde-vernickelt/dp/B0006TZKJ6/ref=sr_1_1?ie=UTF8&s=ce-de&qid=1275047142&sr=8-1
Antwort von Herbert@S:
The two adapters each have a covenant with the result that it rests on the tripod head can no longer plan s.dem but only on the small area the federal government. Unless the federal government has on the underside of disk space.
Really ought to be on the plate a screw thread so that you can screw on the tripod head, for the yes has a threaded hole.
Or what should be the attachment?
Greetings Herbert
.
Antwort von Alf_300:
The federal government is sawed off quickly, the rest to screwed (and pasted) that Page Below is good and that's it then.
If the company would not be an option, the mending
