Frage von Jasper Granderath:
Hello everybody!
I currently have a problem with the reading of material of a short film on HDV was rotated. I will in the following an overview of the technical components of our shoots give and hope that I can be helpful here. Before I mention briefly the problem itself
At the first reading of the material were quite a few interruptions Timecode noted. This lack of material of 5-8 seconds per Interruption revealed. Pro Tape 10-50, there were disruptions. The problem is then in the last few weeks even further. But more on that later.
Now just to the technical:
"EXPERIMENTAL ESTABLISHMENT" Camera: JVC GY-HD101
Recording media: TDK Premium DV Tapes (no HDV tapes!)
Recording Format: HDV 720P/25F
Addition: SG PRO adapter in front of the camera's optics
First Capture medium: JVC BR-HD50 (fresh from the audit)
Second Capture medium: JVC GY-HD101
Capture Software: Final Cut Pro 6.0.4
First Capture Method: HDV via FireWire (Log and Capture)
Second Capture Method: HDV via FireWire (direct recording)
Third Capture Method: Apple Intermediate Codec
Fourth Capture Method: Apple ProRes 422 HQ Codec
----------------------------------------
PROBLEM DESCRIPTION The first error
capture method in conjunction with
First Capture medium: The material is detected and recorded synonymous. After different time periods are specified code interruptions. Between 5 and 8 seconds of material are lost. The attempt to time the code fails consistently to the serial line, the point s.dem material may not be re-activated.
The first error
capture method in conjunction with
Second Capture medium: The material is detected and recorded synonymous. After different time periods are specified code interruptions. Between 5 and 8 seconds of material are lost. The attempt to time the code fails consistently to the serial line, the point s.dem material may not be re-activated.
Second error
capture method in conjunction with
First Capture medium: The material is detected and recorded synonymous. After different time periods are specified code interruptions. Between 5 and 8 seconds of material are lost.
Second error
capture method in conjunction with
Second Capture medium: The material is detected and recorded synonymous. After different time periods are specified code interruptions. Between 5 and 8 seconds of material are lost.
SUMMARY: In all experiments so far indicated the material yourself is the same error messages!
----------------------------------------
Third error
capture method in conjunction with
First Capture medium: The material is detected and recorded synonymous. After different time periods are specified code interruptions. Here are just still frames lost 6-10. New problem: During the capture process is apart of the breaks, no further errors to be noted when the material but in Final Cut visioniert, it will be played in double speed.
Third error
capture method in conjunction with
Second Capture medium: The material is detected and recorded synonymous. Na
Antwort von WoWu:
Hello Jasper.
Old problem, which we with Final Cut Pro were synonymous.
The first proposed solution, which has helped us:
Capture with HDVxDV
http://www.dvdxdv.com/HDVxDVsite/download.html
Trial is in the internet ... check out the times and tell the result.
With us, it worked fine.
However, did you then just take a long and not as with Final Cut Pro louder individual Takes ... You searched for all images.
Antwort von Jasper Granderath:
1000dank!
Will now try the same.
Gebe then know whether it worked.
Best,
Jasper
Antwort von JayAre:
Hello WoWu,
The HDV natively then digitized material or is a special codec?
Regards
