Frage von Sid:
I have a really strange problem and do not know next.
When I try to dub tapes to my computer to the following happens, the recording is stopped after about 0.7 seconds with the ground, the camera was no longer there (still running next asie were premiere) or no more free hard drive space (free or 65 gb, ulead video studio) or errors in the recording (inter video).
all programs receive the same, with a heavily pixelated photo seems a fraction s.ton (ton in the regulation to be). all control the camera properly (timecode runs consistently with the camera) and synonymous with a run of me taken with this camera with video properly.
The band is in a format ntsc, ntsc, all formats, I am already in the programs by and about the movie usb without problems is recordable, but the quality is not the stop that could get you over firewire. I've wesewegen the problem.
Maybe next someone can help me.
The camera is a sony dcr-TRV19E.
Antwort von Jörg:
Hi,
You are sure that your Einspeisegerät can play NTSC format?
It can not all in the name even implies Kameras.Das E cam to PAL.
A look at the playback menu. Can you then select NTSC 4:41? If yes, do it and everything will be alright.
Gruß Jörg
Antwort von Sid:
I already have and nothing has been synonymous, have japaner standart yet another ntsc?
thanks anyway
Antwort von Jörg:
nö,
NTSC (Never Twice the Same Color) is identical, then the tapes are probably gone, the airport control? [/ B]
Antwort von Sid:
The tapes are ok, I've already read it synonymous via usb and that were, until erwarteneden to qulitätsverlust thanks to usb, properly synonymous and are on the display of the cam belts in regulation.
I really have no idea why this does not work, an idea that it's Maybe s.der was taken with the camera was. although I can not imagine why one format should change to follow.
it must somehow be s.firewire or s.der ansteureung the cam. naja early tomorrow I'll try next.
gn8
Antwort von Markus:
Hello Sid,
it is true that Japanese and North Americans use the same television standard) (NTSC-M, NTSC 3.58 synonymous called, but the two standards are not absolutely identical (different IRE levels in the U.S. (7.5) and Japan (0)) are. This should not lead to the described behavior.
Unfortunately, compatibility issues with consumer video systems (and are sometimes synonymous with professional video systems) never completely ruled out. I would assume that the tapes were recorded with another camcorder?
I had been synonymous MiniDV tapes, which have ready when capturing via firewire problems. In this case, either another capture tool (eg
WinDV) oder die Überspielung mittels analogem Kabel.
Siehe synonymous:
"
IRE helps
WinDV) oder die Überspielung mittels analogem Kabel.
Siehe synonymous:
"
scale "
Antwort von Sid:
thank you ^ ^
The tapes were recorded also wed a Sony camcorder. But before I do read me to the analog, I'll try to get a different cam that also supports ntsc. I'm looking for a long time in the forum, the problem on the ntsc format and play the narrowed and hope that it only works s.der cam is located. but if the problem still is now synonymous with the gamma-added comes cheap, but what we all deal. what other programs I now have 6 different covers, and all white with the same problem on.
I'll try it once with windv and hope that it brings a solution prematurely Maybe
you have to scribble the format ntsc-m -> ntsc is 3.58.
I use the cam supports ntsc 4:41 this could be the problem or if the format downward compatible (later times even synonymous'll look for it and once I got into the standarts capture only grad now no time for it)
thanks again
Antwort von Markus:
Hello Sid,
NTSC 4.43 is a mixture of PAL and NTSC 3.58, of the many televisions in this country "understood" is (Resolutionund frame rate of NTSC color coding of PAL).
PAL is technically more demanding than NTSC, so often a one-sided (backward-produced) Compatibility: NTSC PAL devices can play, but neither can play NTSC not PAL devices.
Antwort von Sid:
thanks
unfortunately I still do not understand then why the camcorder with which I'm not working, but I hope next ^ ^ "
Antwort von Markus:
NTSC to PAL ... because the transmission with the analog is taken up again.
