Frage von Berntromp:
Hi folks,
until now I have left the hands of matrix, and the like Knee settings.
"The only change is when one is professional and thus know!"
After a few years, camera work, I now dare to look on it.
Perhaps someone can explain to me what some attitude is good and how to adjust? That would be highly daumen toll! ;-)
First, you can change the matrix,
I then can change the color, I know times already.
I come not only with RG, RB and so clear:
I will now change as RG in the proportion of green or both red, so red and green?
In Color Correction, I still go?
So, should I s.sich so perhaps one even more color to light can bring. But how?
For Black, I can once the Black Level and once the Black Gamma settings. Where is the difference?
And Low Key Sat is an increase of saturation in dark areas? Or what?
I have been synonymous since rumgespielt here and with the settings, I do not totally thoughtless as to the issues. Maybe someone can give me so a few tips regarding the settings.
Thank you and a good day
hopes
Berni
Antwort von Clemensch:
Look in this thread next below! maybe this helps a little bit next. http://forum.slashcam.de/rote-konturen-with-ex3-vt69461.html
With RG and RB, I can not you help, würd synonymous interested me but how exactly it works.
Greetings!
Clemens
Antwort von Maui:
hey,
yes with the settings that is always one thing, it can be broken much synonymous, if you no good calibrated monitor - only the good (but not good enough) LCDs - tried each successive adjust settings. I am always very careful and lay the whole feinjustieren in the post - 3 is the ex of her work very neutral, which is good in retrospect may modify his ideas.
However, I recently both the dvd or the book of the media vortex ex3 fetched. doug jensen declared there as he has chosen his settings. and this he has since he had determined not change. I have also a profile set up under its proposals - because I have no external monitor. However, undoubtedly will fall back to the factory settings back.
Doug's settings:
MATRIX: high sat
PRESET WHITE BALANCE: 5600K (he uses more frequently during daylight preset value on the back - I synonymous)
DETAIL: -10
GAMMA SETTING: CINE4
BLACK LEVEL: -3
BLACK GAMMA: -2
if you have a little more about the individual settings want to know, this article maybe you could help:
http://vortexmedia.com/CAMERA_BASICS.html
regards
Antwort von Berntromp:
sincere thanks in advance. Wow, echt toll!
Have you in the EX-3 synonymous as a bit of a problem with the macro setting? So ... I was previously accustomed to my Lens justierrad via the macro set. Has worked well. Now I macro to "on" and try me with the adjustment of the Fokusierringes but nothing happens. It's especially not when I'm in the zoom ... At zero Zoom I have, I think, ever a macro target. I am very annoyed at the EX-3. Or am I doing something wrong?
Also yes you can still synonymous in the menu in the settings of Lens herumdoktoren? Has someone of you done?
Bring what?
Antwort von deti:
For zero-Zoom I have, I think, ever a macro target. I am very annoyed at the EX-3. Or am I doing something wrong?
No, this is normally the case. Macro's are almost only on the shortest focal.
Also yes you can still synonymous in the menu in the settings of Lens herumdoktoren? Has someone of you done?
Bring what? No, original presets for the included lens is optimal.
Deti
Antwort von Lutz Dieckmann:
Hi,
You can indeed times in the EX forum look, there's a thread on Filming with Picture Profiles. Certainly helpful.
http://forum.sonybiz.net/community/
Otherwise, these settings, you tend to plan a specific Kreeiren looks. Only the knee function, you can often times for a normal rotation set that makes sense.
Greeting
Lutz
Antwort von frm:
But Lutz you make it synonymous Greenscrenn recordings. I have not yet achieved with originals setting (hab a Ex1), the green really green to hold. It always appeared a gray s.zu. That is why I with the vector scope and a preset created for as long as the colors Korregiert the red really red, green, really green, etc..
If anyone has green screen shots with EX1 or 3 has würd mich mal setting interisieren. With White Balance least not work alone.
mfg
Flo
Antwort von Lutz Dieckmann:
Hi,
I do not understand. I've got with the EX1 but not a Green and Blue made it went flawlessly. So as I in my BlueScreen 2.0 tutorial shown hab. Look at the times. So it went smoothly. Tut is in a JVC but on another occasion I had the EX1 and it was easy.
Greeting
Lutz
Antwort von Berntromp:
Still furthermore, that tells me this will be the main material in the cut looks like 1Chip material. (What an insult!) It is unusually dark and muddy (in part).
But how can that be?
On my MacPro calculator it looks good.
On the cutting preview monitor it from cruel.
Arrg! That makes me aggressive.
Antwort von domain:
Is it maybe once in it?
http://creativebits.org/2004/07/windows-vs-mac-monitor-gamma.html
Antwort von frm:
Hi,
I do not understand. I've got with the EX1 but not a Green and Blue made it went flawlessly. So as I in my BlueScreen 2.0 tutorial shown hab. Look at the times. So it went smoothly. Tut is in a JVC but on another occasion I had the EX1 and it was easy.
Greeting
Lutz Hello Lutz,
I have asked my online material.
It is a short testfile in the first part is the Ex1 with my profile. White Balance to 3200 K as halogen. In the second part is the same green screen with no originals profile or profiles synonymous 3200 K.
Aperture in both cases at approximately 4 -6.
Lighting should be fairly similar (cloth!) The woman is not lit because this is more in the darkness played.
The spill is in the first version is still too much, but so the person only about 2 m to the substance had obviously knows and has worn.
But I have my own thoughts quite aktzeptabeles final won.
I find it odd synonymous but the green is almost in the yellow goes.
1080P25 MPG format ca 24MB)
Link: http://www.fr-multimedia.de/greenscreen_Ex1.mpg
Heat for your opinion very grateful, especially the opinion of Lutz would Intresieren me.
Thanks Vieln
mfg
Florian
Antwort von Berntromp:
UV was decisive!
This is my picture made it muddy. Madness.
So, no UV 107mm Formatter for SonyEX3 buy!
Antwort von frm:
oh god I've just finished a uv filter for my ex1 buy, do not make me weak. I have a of B + W 77 UV Haze. What did you?
Antwort von domain:
Thank God, was now finally recognized that, especially the UV-Picture can ruin insane. This applies synonymous for almost all the other unnecessary.
Antwort von Bernd E.:
... of UV was a factor ... no Formatter UV 107mm for the SonyEX3 buy ... ... Thank God, was now finally recognized that, especially the UV-Picture insane urinate can ... Cheap NoName-Outland sure, but that this UV-class and muddy the picture can be dark, it seems to me difficult to imagine - especially if the image degradation seems not always occur:
... On my MacPro Calculator does it well ... If, nevertheless that as a source of error can be clearly verified, then in its manufacture to be something terribly danebengegangen: Normal is such a behavior in any case.
... that tells me this will be the main material in the cut looks like 1Chip material. (What an insult !)... Nimm's with humor: Red One, and SonyF35 Arri D-21 are synonymous "only" 1-Chipper ;-)
Antwort von Berntromp:
So the UV filter has cost 140 ¬. of rental companies, we filter ¬ s.300 recommended.
We wanted to save again.
In any case, the UV is not bad for SD optics, it can only be that he does not stop for a HD-Optics recommends.
I had lovely synonymous Bildmittig lens flares, etc.
So ... it was just unusable.
Is Sony so, I believe, synonymous s.welche UV-man problem with the HD-Optics can use and what not.
I know only now synonymous.
Antwort von Bernd E.:
... can only be that he does not stop for a HD-Optics recommends ... Thus it was None of the HD-Formatter?
Antwort von Berntromp:
probably not. my production manager is probably the tempting price of neglect can be!
Have I ever wondered why when I hire an expensive firm protective glass is offered my production manager and one for so little has raised. Well, ... if you do not do everything yourself ;-)
Now I have only the problem that the colors slightly exaggerated saturated. I have the Gamma Cine4 setting and in the Matrix High Sat (;?) Is set.
s.detail may lie? Is currently set at 15.
Sure, I will even herumschrauben here and there, but maybe yes synonymous of someone you so had to fight and knows now to find a solution fast.
In addition, since your here in the forum really cool guys, s.die you like to apply when one has a problem. Thanks for your help and assessments!
Antwort von frm:
Hi,
I do not understand. I've got with the EX1 but not a Green and Blue made it went flawlessly. So as I in my BlueScreen 2.0 tutorial shown hab. Look at the times. So it went smoothly. Tut is in a JVC but on another occasion I had the EX1 and it was easy.
Greeting
Lutz
Hello Lutz,
I have asked my online material.
It is a short testfile in the first part is the Ex1 with my profile. White Balance to 3200 K as halogen. In the second part is the same green screen with no originals profile or profiles synonymous 3200 K.
Aperture in both cases at approximately 4 -6.
Lighting should be fairly similar (cloth!) The woman is not lit because this is more in the darkness played.
The spill is in the first version is still too much, but so the person only about 2 m to the substance had obviously knows and has worn.
But I have my own thoughts quite aktzeptabeles final won.
I find it odd synonymous but the green is almost in the yellow goes.
1080P25 MPG format ca 24MB)
Link: http://www.fr-multimedia.de/greenscreen_Ex1.mpg
Heat for your opinion very grateful, especially the opinion of Lutz would Intresieren me.
Thanks Vieln
mfg
Florian Did my great demo angeshene None?
Lutz?
Antwort von Jogi:
But Lutz you make it synonymous Greenscrenn recordings. I have not yet achieved with originals setting (hab a Ex1), the green really green to hold. It always appeared a gray s.zu. That is why I with the vector scope and a preset created for as long as the colors Korregiert the red really red, green, really green, etc..
If anyone has green screen shots with EX1 or 3 has würd mich mal setting interisieren. With White Balance least not work alone.
mfg
Flo frm,
I almost think you make a white balance on your Green Screen. Of course not! A WB has on a white surface under the prevailing ambient light made. Save Results. then out of the car mode, and the WB preset to activate. Blue or Green Screen with the EX1 klappt super!
Your link will not call!
Antwort von Jogi:
probably not. my production manager is probably the tempting price of neglect can be!
Have I ever wondered why when I hire an expensive firm protective glass is offered my production manager and one for so little has raised. Well, ... if you do not do everything yourself ;-)
Now I have only the problem that the colors slightly exaggerated saturated. I have the Gamma Cine4 setting and in the Matrix High Sat (?) Is set.
s.detail may lie? Is currently set at 15. Sure, I will even herumschrauben here and there, but maybe yes synonymous of someone you so had to fight and knows now to find a solution fast.
In addition, since your here in the forum really cool guys, s.die you like to apply when one has a problem. Thanks for your help and assessments! Details at 15? This is Noise vorprogramiert. And the great steadiness of XDCAM is gone. If detail is ON, then let the level set to NULL. In this setting, there is a very subtle Kantenaufsteilung. But 15! is already huge. Since shaking so hard every edge!
HigSat raises the Farbpegel quite significantly. If it going to bunt is set just the color level down ... (Matrix / Level -99 to + 99) The standard Gamma is an increasing level of + 15 is pretty good.
... or sezte of Highsat standard.
Antwort von DeeZiD:
The detail function makes the really great, of course, sharp-EX1 Picture of a video-look-like-acting and digital picture flickering with Alias | Wavefront Mayaing and double edges.
Thus!
Detail = OFF
very important.
Only this will ensure a really good EX1 and organic picture of her - almost DSLR Like.
Who on cheap video look is not EX1/EX3 needs. As rich synonymous ¬ 500 entry-level HD cams.
Gruß Dennis
Antwort von frm:
But Lutz you make it synonymous Greenscrenn recordings. I have not yet achieved with originals setting (hab a Ex1), the green really green to hold. It always appeared a gray s.zu. That is why I with the vector scope and a preset created for as long as the colors Korregiert the red really red, green, really green, etc..
If anyone has green screen shots with EX1 or 3 has würd mich mal setting interisieren. With White Balance least not work alone.
mfg
Flo
frm,
I almost think you make a white balance on your Green Screen. Of course not! A WB has on a white surface under the prevailing ambient light made. Save Results. then out of the car mode, and the WB preset to activate. Blue or Green Screen with the EX1 klappt super!
Your link will not call! As explained above, the White Balance on 3200Kelvin, since this is the value for normnalerweise is halogen headlights.
When you simply right-click link and save target as.!
