Frage von Nordevil:
Hello,
I export my gecapturten of the camcorder recordings in various formats (wmv, mpeg, etc.). The films are synonymous only on the PC can be viewed, therefore need not DVD-compatible or similar.
When I look at the films after the export view on my PC, I always found that even at faster pans always such a trembling effect occurs. I do not know exactly how I should describe. It seems as if the images are always out and shake her, to say that with a swing of as left to right, first a picture, then the next bit next to the right, but then again a bit next left and then again next right etc. Deinterlace is naturally given, so this Kammeffekt that is interlaced s.PC material may occur, it is not.
Is this normal or can I s.PC since in any kind of control?
Thanks again for your help!
Greetz
Nordevil
Antwort von Markus:
The description I would have a false Halbbildfolge typed, but I am still at the consultation, the conditions under which a deinterlaces still could play a role ...
Antwort von Nordevil:
Well, that I had only thought synonymous. But that can not normally be yes. Can anything at capturing s.Fehlern occur? Usually, but not synonymous, or? MVD makes everything so synonymous cars.
New ideas?
Greetz
Nordevil
Antwort von Markus:
Well, that I had only thought synonymous. But that can not normally be yes. Well, what is already at a normal computer? ;-)
Test method, I would look at the interlace Halbbildfolge a scene change and the new section and deinterlace progressive export. Or do you have a video monitor s.Deinem PC, so that Halbbildprobleme during the processing to be identified (see link)? The preview window can be only a very limited trust.
Cross-reference:
Basic question about monitor
Antwort von Nordevil:
Hi Markus,
Thanks again for the tips. So an extra video monitor, I have not s.meinem PC! When the source data I have times changed and the Halbbildfolge times completely synonymous Progressiv changed. The result in the other Halbbildfolge, however, was the same as before and during the progressive material appeared to be the Kammeffekt! I do not know more next!
Did you perhaps have other ideas?
Greetz
Nordevil
Antwort von Gast 0815:
Hello Nordevil,
write it out exactly how your production looks, ranging from the format that the camera delivers up to Endkodierung.
Greetings from Marburg
Antwort von Nordevil:
Hello,
So I have a Panasonic GS-250 MiniDV camcorder. By I go via firewire into the PC. With Magix Video Deluxe I then capture the video, should be considered as DV-AVI is available. Then I export the video just yet, so I cut nothing, etc. I do most times A-and Ausblendugen added. I then export the video as in the wmv format. Settings include: WMV9, 25fps, PAL, 640x480, I-Frame: 2, bitrate varies. The tremor occurs but always on. Stop only when panning. If the picture is not great moves, then of course everything is in order.
I hope the description is sufficient Dir If you find something suspicious, then ever so forth. I knew not what this great wrong could be.
Greetz
Nordevil
Antwort von Zizi:
was not so earlier? So now for the first time? what is capturing the set?
Antwort von Nordevil:
A "past" there were not. I export for the first time! Captured is interlaced. The problems remain synonymous, but if I change.
Antwort von Markus:
I then export the video as in the wmv format. Do you have a short sample times for viewing? The term jitter is so happy for different effects used, not that we write to each other.
Antwort von Gast 0815:
@ Nordevil,
Look here:
http://forum.gleitz.info/showthread.php?s=0fcaf779272f1f0023f082d20b5252b7&t=35614
Greetings from Marburg
Antwort von Nordevil:
Hello,
I've
Antwort von Nordevil:
Hello Marburger,
Post your've just seen. Be the solution equal to try! Could be that it is.
Greetz
Nordevil
Antwort von Nordevil:
Hello,
have now proposed solutions from the other forum synonymous times tried. Unfortunately for me it brings nothing. Neither MVD nor a trial version of Premiere Pro. The only possibility that remains seems to me is that I have other programs such as Ulead, etc. try.
Greetz
Nordevil
Antwort von Markus:
I am still not come to me the time to clip. Either I sat s.einem calculator, with the *. rar knew nothing to start, or I needed the bandwidth otherwise. - I hope there's no hurry so ...?!
Antwort von Nordevil:
Hi Markus,
meanwhile you have ever found the time to teach you the samples to be?
I have been synonymous times more attempts. I have now synonymous with WinDV, Windows Movie Maker and Virtual Dub captured, but the result is always the same. It's funny that the video while capturing the preview window in the "right" is being played. I will then look at me then, does the problem but it again. When Movie Maker, it was so that I the video right after the capture even more correct view. After I once in a different format was (to test) was synonymous of the original video is not more handsome! Can you find something with this information to start?
Is it synonymous s.ffdshow filter lie?
Perhaps you know yet another solution.
Greetz
Nordevil
Antwort von Markus:
... meanwhile you have ever found the time to teach you the samples to be? The "tremor" looks to me very jerky from. Check out the exposure time of your original photo and the frame rates in each processing step.
Antwort von Nordevil:
Hi Markus,
because I am now on the tube! How do I get because the exposure time out of my original photo?
The frame rates, I can say that the recording should have 25 frames, stop normal PAL standard. Basically, there are with me till now still does not work. I capture the video and then immediately change it to a format. Therefore we should expect the framerate does not change.
I
Antwort von Markus:
How do I get because the exposure time out of my original photo? Some take a camcorder DATA CODE, which not only date and time of the recording means synonymous but the exposure time and various other settings. For devices Sonywäre the presence of this feature, but likely.
I capture the video and then immediately change it to a format. Therefore we should expect the framerate does not change. Of course, you can be synonymous, the frame rate change. When outputting the video quite (too) easy.
I have hier mal ein kleines Originalsample hochgeladen.Dein Videoclip sieht rein technisch völlig in Ordnung aus. DV PAL 50i eben (kontrolliert s.Videomonitor). Nur inhaltlich sind die Schwenks ein bißchen zu zahlreich. ;-)
I've synonymous found that if I sample with the VLC and play at Deinterlace "Bob" one telle that the video will no longer be jerky or trembles. Is this normal? Did something with the PC / TV screen to do? Poste doch mal screenshots of the Project and Export Settings. This should make the mistake can be found.
