Frage von Scharfrichter:
Morning
quite a long topic with a rather simple question.
I just got here before me a SonyHandycam with both standard DV output via Firewire and a USB interface. My PC has had, unfortunately, only 4 regular USB 2.0 ports, and therefore I tried to get Exempt footage via the USB cable to my PC. Now I already have Adobe Premiere and thought to myself that I could do wonderfully with the capture function, unfortunately, was not. I probably have to say that my first attempt of capture nem camcorder to the PC's hard-drive and therefore helpless I'm probably still synonymous. After some back and forth I finally using Windows Movie Maker, a USB connection and could only manually but also copy the USB imagery streamed in Resolution320x240 and this is clearly not enough to me, especially because I have the camcorder in 16:9 format Turn on the video had stopped and will have the format like it synonymous with capture. Now I've googled and saw that perhaps the firewire version of this camcorder is the standard and they are supposedly on the DV port can achieve better quality and that they then can address synonymous on the PC Camera and capture the footage down so convenient can. Now I have as I said no firewire ports and I think for 20 ¬ ne PCI card expansion, and now bring to my core question, it's worth it? Was für ne quality, ie resolution, I have the firewire version and will be expected to maintain 16:9 format?
 |
Antwort von Nightfly!:
20 ¬ worth it. (Or do you want a new editing program to buy for 99 ¬? * Gg *)
synonymous, see here:
http://forum.slashcam.de/re-movie-maker-vp113480.html?highlight = # 113,480
Greeting
Nightfly.
Antwort von LuFaHa:
Right!
In any case, switching to FireWire.
Full quality of my knowledge, only a few camcorders using special software (available for example in the most Panasonic camcorder with MotionDV).
Antwort von Scharfrichter:
What you are referring to with full quality?
Do you mean to achieve the full quality of the film itself via firewire only with special programs or capture was still based on USB? Oh, and maybe someone can throw mal ne Resolutionin the space you would expect to have tape via Firewire on normal na nem SonyHandycam with normal SP MiniDV?
Antwort von LuFaHa:
On the DV tape be stored films in the format 720 x 576 pixels. One must take into account a pixel aspect ratio of 1.666666:1, so we get the standard 4:3-format.
Via Firewire can be (properly) with any Capture_programm full Resolutioncapturen.
The special programs (eg, the addition of the Manufacturer Panasonic) related to USB.
Antwort von Markus:
FireWire FAQ">Camcorder / recorder s.PC connect and capture images
-> 1 (b) digital camcorder / recorder via Firewire or USB to hook up?
-> 2 When a PC or laptop has no Firewire port
Antwort von Pawel:
Hello,
So were my tip.
Holl you a Fire product for 20 ¬.
Because it can go in your pants, I speak from experience,
a cheap 20 ¬ Fireware not had the necessary protection for the camcorder
as could happen if the voltage on the wets your camcorder breaks down or harm small increases.
Übrigenz USB2 does not deliver the promised transfer 490MB
In contrast with Fireware 400Mb.
For the USB port, you need a special software
PS: look for times Terratec Cameo.
This map gives the necessary protection against such spans.
(Alone, a power supply of the PC can cause a lot of what the problem is electrical supply)
Antwort von crumpet-co:
Synonymous, and this should consider:
The recovery onto tape (if the DV camcorder - In able), is all about only via Firewire and not USB.
Antwort von Voltz:
Sakra! Now I was not logged in again. ;-)
Antwort von Scharfrichter:
shit!
I've now got a ticket for 20 ¬, but of VIA, the net go soltle synonymous? Ist ja nen large and well-known company that says
Antwort von Jan:
Synonymous, and this should consider:
The recovery onto tape (if the DV camcorder - In able), is all about only via Firewire and not USB. Will not play the sly, but with Canon MVX 45 i in conjunction with Windows Movie Maker version 2.0, it is possible to retransmit the film via USB (is recognized as a Canon USB Video), but the camera has DV IN synonymous. The camera is an exception with USB IN up to now. And just 2nd who takes WMM?
Nevertheless, a Firewire dubbing in any case, Quick and ...
Because Via card?
Why not, with Ulead Video Studio 8?
Ok, the quality of the times may not be first class in the price, so do not fuck it, so that the plug-in lasts long ...
LG
January
Antwort von hannes:
> Will not the sly play ....
I do not synonymous, but still a few observations:
1. I have installed here several 1394 cards with VIA VT6306 for 9 ¬ incl cable. Absolutely no problems!
2. Male and sockets are in fact a problem.
On the map are 2 large and a small jack. I use only the large ones.
The cable I have disposed of. The times have wires and no tongues. This move rapidly back and at worst cause the destruction of the 1394 entry s.der Camera.
Conclusion: No money in the card, a lot of money into the cable.
The Camera thank wirds.
Antwort von scharfrichter:
nen for what cable would you recommend for me then, gibts there any specific brands or where to focus there. can you give me maybe ne nen give specific recommendation on ebay items or amazon.de?
Antwort von hannes:
Go into the nearest shop, MM, Saturn, Atelco, Conrad ...
Take a magnifying glass with the little time and look at closely.
Are the contact round, caution is required.
Slide slightly back.
The contacts are flat, they are synonymous bent slightly forward.
These cables will never make trouble.
