Frage von Christian27:
Hello,
I have a question about Digital Converter Canopus ADVC-110 ...
It is this:
I would like to see maybe a ADVC-110 for sale.
Mainly I would like to use the device to the preview in the editing program (Edius NEO) on the TV out ...
My PC has a Firewire port, it is then connected to the ADVC. On the TV-output on the back, I then at the Television ...
Now to my real question:
Is it possible my DV camcorder s.den - In front of the s.der ADVC-110 adapter and then this signal, so to speak durchzuschleifen (through the firewire cable s.den PC) and then in the normal editing program on capture?
It's just a question, because my PC so it is only a Firewire input and has since then is connected to the ADVC ...
And I do not want to constantly when something I want to capture the Cam umstöpseln ...
And above all I would like during the capture process synonymous previews on the TV output (via the ADVC) ...
If so funktioneiren how I imagine it presenting?
Has someone of times you tried, the one ADVC-110 has?
Many greetings
Christian :-)
Antwort von Markus:
Is it possible my DV camcorder s.den - In front of the s.der ADVC-110 adapter and then this signal durchzuschleifen ... so to speak? I have achieved an ADVC-110, but a DV camcorder, I have not yet connected to it via firewire. - Maybe I try again when the opportunity (but honestly not much hope that this will work).
Antwort von Christian27:
ok, would be great if you could try ...
What could I do?
Could I theoretically, a second firewire card installed, connect to the cam and capture?
But how is that with the preview, I could then also on the ADVC-110 output s.Analog spend? (Because this is so then on an other times I say "port")
Greeting
Christian :-)
Antwort von Markus:
ok, would be great if you could try ... This came to me not yet. : - /
Could I theoretically, a second firewire card installed, connect to the cam and capture? Yes, it would be possible.
But how is that with the preview, I could then also on the ADVC-110 output s.Analog spend? I suppose that this is possible as long as the ADVC-110 exclusively with the camcorder is connected (ie without a PC on the network). A camcorder would have been so synonymous own AV outputs, so the preview on the ADVC-110 would no longer be required.
Antwort von Markus:
Is it possible my DV camcorder s.den - In front of the s.der ADVC-110 adapter and then this signal durchzuschleifen ... so to speak? So, the test is done - and I must say that I am the result very surprise!
First, the experimental setup: ADVC-110 with 6/6-poligem Firewire cable s.einer IEEE 1394a interface of the PC, thereby powering the A / D converter via Firewire. MiniDV camcorder with a Firewire cable 4/4-poligen front of the s.der ADVC-110 connected.
After connecting the ADVC-110 to the PC recognizes the A / D converter. After connecting and turning on the DV camcorder to the PC recognizes the device synonymous (with its correct model name), as if the camcorder is connected directly s.PC. Now it is possible, from the camcorder to capture (with WinDV tested). It is synonymous analogue preview on the ADVC-110, unless this digital-in is made. So exactly what have you wanted to.
I was really impressed that Canopus has mitgedacht appears here.
Antwort von Christian27:
Booyah!
Thank you that you've tested! :-)
Then work the same way so I wanted to, is so wonderful! ;-)
Many greetings
Christian :-)
Antwort von Isekram:
The operation of Canopus ADVC 110 no fault of their own power, I would advise against.
For me, this Mistteil the Firewire port of the computer itself and to Nirvana shot. The reason was the excessive power of the converter. The repair costs for the Canopus have nearly reached its Neupreis.
So, with better power supply.
Antwort von Markus:
The reason was the excessive power of the converter. How is this cause been identified? I ask only because as the cause of a defect s.der Firewire interface primarily appears to be an electrostatic discharge nichtgeerdeten user in question.
Antwort von Isekram:
The defect occurred during operation on a non-reinitialized ......
The converter was turned on and should have a VHS signal digitizer.
Shortly after the start of the conversion and broke everything from wars.
Incidentally, I have been synonymous in other forums of such problems read.
Canopus Germany was synonymous manifesting itself in this kind.
Antwort von Markus:
This is an interesting info. With the data of the A / D converter and the Firewire interface, I just expected after that at 4.5 watts and 5 volt power via firewire nearly 1 ampere flows. For a data seems to me to be quite a lot.
After a brief search on the Internet, I found out that per IEEE 1394 interface with an output of 1.6 A (= 8 watts) to the right power supply performance is taken into account. As expected, but the entire card-intentioned and not only the power supply via Firewire (Source:
www.pc-special.net/...viewtopic&t=5934). Why the Canopus converter yet for the operation via firewire stream has prepared, then of course, very questionable.
