Frage von Dennis Reinhardt:
Michael Brand wrote:
> Since I have the same cut off times into the same groove:
> There are already several software solutions on HTPC basis, eg
> Linux VDR variants and similar synonymous with Windows.
>
> Weiß jemand, whether it is a variant of this
> "DVB-SI Descriptor PDC supports?
> That would be yet one more reason for me, I have a HTPC build.
> Yes, I will try synonymous itself, relevant information on the Net
> To find ;-)
>
> Greetings,
> Michael
Good keyword, I had an email with the request s.Technisat
written by rauszubekommen whether Digicorder HD S2 Pros already
used or will soon (by an update) can be. The answer
was more of the hot pudding:
"VPS is in the field of DVB-Digital is no longer as in the usual analogue area
used. Only ARD / ZDF and ORF indicate that VPS-like control signals
inserted in the digital data stream.
All private broadcasters transmit, for example, no relevant
VPS data. An exact time of admission control is part of the private
not supported.
VPS settings can be Digicorder not be made.
The VPS-evaluation resulting in the receiver and control elements for the
Recording device to win, is currently even with relatively high technical
Effort
connected. It should be constantly in the background the EIT (Event Information
Table ") are evaluated.
There is a larger processor and more Perepherie, possibly an
another receiver, is needed. For these reasons, it was so far in this
Function waived. At present, no Technisat Digital Receiver
on VPS.
To view the technical development effort to justify, the
VPS function of all broadcasters, supported and encouraged. VPS
makes little sense if this service broadcasters do not
offer. Under these conditions, it is next depends on whether the
Synonymous user is then ready for VPS appliances spend more money if the
Application remains limited.
Technisat this is regularly in contact with the broadcasters and
seeking an amicable solution. You may then be
next generation of devices VPS already taken into account.
To start broadcasting shifted despite a complete recording to obtain
you have in the Digicordern the possibility of a permanent pre-and
According to program duration, timer in the menu under Manage>
Timer settings. The time is set to auto on the SFI
programmed airtime added.
The manual timer setting, this setting is not. "
Gruß, Dennis
Antwort von NicK. Mowe:
Dennis Reinhardt wrote
>
| To view the technical development effort to justify
|, The VPS function of all broadcasters, supported
| And promoted. VPS makes little sense if program
| These service providers do not offer.
>
AFAIR, the individuals never - or only a test - a VPS signal.
Finally, it is primarily those important to you so that all synonymous
Advertising provides. In this respect meets the TechniSat-Gesäusel wrong. But in the
ÖR, I found the VPS function quite well in practice. As I still
Daily Soaps recorded on VHS, then started to pinpoint, although the
Early times due to more or less advertising always moved around.
Even if, for example, the nightly repetition of the WDR Local Time wg.
Corpus Christi modest, took the device to nothing. Now I have the garbage
manual and sort out according to the start of the next program
forward. But if the lords of TechniSat is too much trouble, their
Device according to upgrade, you can nix it.
Greetings from Nic
Antwort von Gerd Schweizer:
Nic K. Mowe wrote:
> But when I found the ÖR the VPS function quite well in practice. Than
> I have the daily soaps on VHS recording started there exactly,
> Although the start times by more or less advertising around
> Always postponed.
Exactly, Nic, as I remember even before s.eine series on ZDF, as
interrupted them in the advertising block and the VPS signal after the advertising block
went the next recording.
--
Liebe Grüße, Gerd
FAQ satellite, PC Tips, Cats, Mopped, Garden, DIY:
http://www.satgerd.de/
Antwort von Frank Derlin:
... X-Post over 2 NGS
Fup2 de.comp.tv video
"Nic K. Mowe" wrote ...
[snip]
> Even if, for example, the nightly repetition of the WDR Local Time wg.
> Corpus Christi modest, took the device to nothing. Now I have the garbage
> Manual and sort out according to the start of the next program
> Forward. But if the lords of TechniSat is too much trouble, their
> Device according to upgrade, you can nix it.
But, you could make a PC with 'DVBS VCR2' use.
Quote of the website:
| When using event controlled recording (/ ei / en / ec or / jr options),
| Recording will start when the state of the specified changes to event
| "Running". When its state change to anything different than "running"
| Or "paused", timer-record mode is entered. This means that using the
| / T option it is possible to specify the time that recording continues
| After the event ends. If the / t option is not used, recording ends
| Immediately
According to my observations will change the status of "started" on
"runs" almost always a few seconds after the actual start of
Consignment. I suspect that this behavior is caused sender and to
Non-inclusion of this option contributes.
Gruß, Frank
Antwort von Bernhard Wohlgemuth:
Derlin Frank wrote:
> According to my observations will change the status of "starts"
> To "run" almost always a few seconds after the actual
> Launch of the consignment. I suspect that this behavior
> Station and is related to non-proliferation of these
> Recording function contributes.
That is the problem - and it was synonymous already blessed VPS
Hours: Even then, a VPS recording times like 15 seconds to
started late in the observation of the event info is synonymous in the
DVB-S the same thing again ...
However, I can not use it well: a hard-Recorder
did not include specific weaknesses of the VHS tape with respect
Utilization of the tape - I assume, therefore, with a little pre-and
After running properly, which I can then skip to the Watch
when archiving or off.
Gruß Bernhard
Antwort von Claus_Färber:
Frank Derlin
wrote / wrote:
> According to my observations will change the status of "started" on
> "Is" almost always a few seconds after the actual start of
> Consignment. I suspect that this behavior is caused sender and to
> Non-inclusion of this option contributes.
In today's Plattenrekordern is really no preference. Then you could
theoretically easy to record everything (possibly even in the RAM
cache) and then using the signals, the best possible
Target (for example 5 seconds before "starting") set.
Claus
