Frage von Glottis:
hello, still maa on another topic:
I have something similar synonymous schonmla made with several microphones and mixer, but when I use the sound on the stereo output on the camera aufnhemen wanted the whole time was an awful buzz was not there to get away you could be the "right" ton hardly hear with the headphones directly s.mischpult sat a super quality hat.ich hab instead of Kmaera auhc already connected to the Pc there, here I had no such problems. IHC wants now on ebay with a small protable MD recorder auction. is there the same problem? where is that? how can we prevent it?
Antwort von Anderl:
Camera ran on batteries or via power supply? In the latter case, you had probably a hum loop. You can avoid this by the various devices on different security circles to be (in the church ...?... hmmm.) Or use a big battery, so ne marriage did not last forever ...
It is synonymous to build an adapter, on the one Page Schuko-in on the other euro-Out cable, which eliminates my MacBook with the hum - but that is possibly dangerous and in accordance with VDE, etc. completely inadmissible, so obacht give, live longer ...
Groetjes,
Anderl
Antwort von Glottis:
entschulige much I again disturb your subject,
but I've just tried it. I had my camera on the network-connected and linked with the mischputl, but it has done nothing. or does that only when both devices are not s.netz?
perhaps I have the noise synonymous incorrectly described, it is not a buzz, it sounds sihc after wind (storm), as if someone blow into the micro.
Antwort von Glottis:
entschulige much I again disturb your subject,
but I've just tried it. I had my camera on the network-connected and linked with the mischputl, but it has done nothing. or does that only when both devices are not s.netz?
perhaps I have the noise synonymous incorrectly described, it is not a buzz, it sounds sihc after wind (storm), as if someone blow into the micro. hello, I have a similar problem synonymous and would like a response to it.
Antwort von Markus:
I have read the above posts from the discussion times
Recording bei einer Tonaufzeichnung
Zur eigentlichen Frage: Ich nehme mal an, dass die Signalübertragung unsymmetrisch war. Hat es vielleicht with der Kabellänge zu tun?
Was es damit auf sich hat:
Charitable organization catering to impoverished castle ghost ...
Antwort von tobibonsai:
I know the problem, and it is very annoying. I had my camera, connected s.mischpult, an odd thump when the camera was connected nas networked, and the automatic tonregelung played synonymous crazy, she has really "pumped". My shooting: tonaufzeichung parallel to the external camera, and nacher help with the audio waveform synchronisiren
Antwort von hansreinhard:
with what you have cable because the mixer with the camera connected?
Many mixers have balanced XLR - or jacks which fit neither of the contact or the occupancy level signal to the mini-jack microphone input of the camera!
if you think of cinch output have declined (2x cinch to 1x stereo mini-jack adapter), I tend to a broken cable or a plug was not properly inserted. Such Y-cable (RCA to mini jack) there are retailers synonymous with attenuator, because synonymous s.cinch output is the signal about 10 times stronger than out of a microphone.
the thematic network humming is not as relevant as long as you have with your mains power supply hang s.selben as the mixer.
gruß hans
Antwort von tobibonsai:
So markus antort could, of course, synonymous, because I have a 6m unbalanced cable has packed in between.
but the problem is gone anyway, I have on ebay a stationary MD-deck only anden, only 30 ¬
Antwort von tobibonsai:
I hope you did not take care with
a 'line in' link in the 'mic in' of the camera
to go.
gruß cj
Antwort von tobibonsai:
how should I make it andres, the camera has no line-in
Antwort von Markus:
... because I have a 6m unbalanced cable has packed in between. With a shorter cable that can be influenced easily confirm or exclude.
Antwort von tobibonsai:
how should I make it andres, the camera has no line-in na dann is the clear cause of the hum!
(Incidentally, would the mic input of the soundcard is not otherwise synonymous)
I'm no audio expert, but since there are different
input resistors in mic / line in. ..
sure there are some experts on the subject,
maybe you can since a (black) box between the switch
required signal generated?
gruß cj
