Frage von Jürgen P:
Hi folks,
I am interested in my trips with the Mopped in the Alps, to film.
Now to my question: Has one of you ever been out of a motorcycle, with a helmet-camera filmed or finger? If yes, what type of camcorder, and the helmet-camera, or finger angeschaft should be. And where can these (or finger helmet camera) Buy?
For the next answer I ever thank you in advance.
Thank you! Jürgen P.
jpaerschke-AT-gmx.de
Antwort von Stefan:
Tested but not yet ....
http://www.pashnit.com/more/cameramount.htm Gruss
Stefan
Antwort von TomoRono:
Hi Jürgen,
the cheapest, and synonymous terms of results, a good solution
is the camera mounted on the tank backpack through Gumiseile.
Nähmlich has several advantages. If you use the tank bag with something
soft ausstopfst - towel, etc. are also Pullower vibrations
swallowed and the Camera grooved. Disadvantage, possibly, in the field of Ka -
mera is the windshield.
Have a number of recordings made in the Dollomiten.
tomorono-IN-yahoo.de
Antwort von Werner Ziesel:
Hello Jürgen,
I have for my Kawa bought a breakpoint, so I can use my private Handycam and need no expensive finger or Helmcams buy.
You can use the part on
www.motocam.de see. So I was and am still-hard enthusiastic.
Gruß Bill
Antwort von Andreas Ploch:
Hello Jürgen;
I stood some time before the same problem. My experience on the topic of "shooting at a motorcycle" you'll find on my website!
Antwort von Mirko:
Andreas has been in my opinion very well to the point. Also look at his watch and Page continue surfing!
As far as I can judge, there are three ways to film, what I would consider:
1) camera tripod on the tank or rear
2) Helmet Camera
3) fixed built-Mini Cameras
to 1)
Camera tripods are now in all price ranges on the Internet. I myself have tested several.
At best, if possible, is a tank stand, which means the fitting of the tank is installed. Advantage: low overall height and firmly and definitely not wobble! Recording is due to the disc and filming synonymous nor a part of the instrumentation. Conditions, if not extremely driven, even on the track only! Price was less than EUR 20.00.
Did you even from England who, with the three suction cups! are attached and are adjustable in three dimensions. Can be synonymous for 'after hinten'anbringen. This Sative I use on the bike did not because it is based on the tank too high build and beyond, except the suction cups, yet extensive backup. If I do not really likeable.
There is also mounting brackets for many machines, which replace the rear footrests are screwed. I have not yet tested. Cam should be against this filth etc gesicehrt be. In the event of a fall or slide, the cam but surely synonymous scrap ...
to 2) Helmet Camera
is now synonymous of Polo already offered price here about EUR 495.00! Cheaper to purchase in the U.S. - But beware! when mailing is to pay more inches! Nevertheless it is worth (http://www.helmetcamera.com)
With this cam, I have very good experiences. Disadvantage is that you have a camcorder with analog! Input needed. The HelmetCam in Cage is virtually indestructible and should be synonymous coarser falls survive. Another advantage is that you see them everywhere! can attach. The camcorder for recording can be safely placed under the seat stowed.
Very robust and very versatile!
to 3)
I have no experience. Probably the cheapest option, however, be - if it works because ...?
In an online auction house will be 'color mini wireless cameras' offered for little money. Multichannel system is even, so that construction may be several cameras. Idea is that multiple cameras, similar to racing, forwards, backwards, etc to be fixed to the motorcycle construction. The receiver then attach to the hump, where you also, as with the helmet camera, camcorder ischer the place for the recording.
As I said, probably the cheapest option when it's synonymous since this is how it works and the quality is so okay.
The biggest advantage here wäere that Cams firmly installed on the on-board with power and then only have to put the camcorder anstöpselt and go.
Maybe you can even see the cam to the rear with a mini-monitor, together with a love TÜV'ler even as a mirror replacement register ... ;-))
Werde es mal test here and then write next ...
For questions, simply e-maile)
NoFear
myrdiin-AT-web.de
Antwort von Christoph W. Eckard:
Hi,
here is my experience with recordings of two:
1) Camera as firmly as possible with the vehicle connect (depending softer suspension, the more blurred the Recording)
2) Get a small tripod with mounting plate on the head. Attach the tripod (or parts thereof on the vehicle). Has the advantage that you have the camera with a handle to remove it. Good location is quite far down so that the front wheel still protrudes slightly into the picture. Are super pictures!
3) Take a simple DV Handycam, which are robust enough (if it s not just go into the wet.
Good luck!
Christoph
:
: Unknown Hei,
: Thank you for your tip, but with me not quite feasible. Weil: First my
: Tank backpack is not high enough, and second, the camera does not have the
: Instrument console protrudes.
: Nevertheless, many thanks for your advice
: Gruß Jürgen P.
dixioldie-AT-web.de
Antwort von Jürgen Pärschke:
: Hi Juergen,
:
The cheapest, and synonymous terms of results, a good solution
: Is the camera mounted on the tank backpack through Gumiseile.
: Has nähmlich several advantages. If you use the tank bag with something
: Soft ausstopfst - towel, etc. are also Pullower vibrations
: Swallowed, and the Camera grooved. Disadvantage, possibly, in the field of Ka -
: Mera is the windshield.
: Did so several shots in the Dollomiten made.
Hei Unknown,
thank you for your tip, but with me not quite feasible. Weil: First my tank bag is not high enough, and second, the camera does not have the instrument console protrudes.
Nevertheless, many thanks for your advice
Gruß Jürgen P.
juergen-IN-paerschke.de
Antwort von Stefan:
Bill, fahr 'carefully. Since drüber to dive is tough!
The thick Stefan
Antwort von Jürgen Pärschke:
Hi Bill,
Thank you for your mail. Unfortunately, I can be a camera adapter my Guzzi (Cali II) do not install because I do not have tank with screw. My tank is closing with a lockable door provide. Nevertheless, many thanks.
Gruß Jürgen P.
juergen-IN-paerschke.de
Antwort von darkdragon21:
Hi ......
I'm just building on a bracket for a cam ......
I've presented to me so .....
Between the rear-view mirrors and handlebar mount I use a small aluminum, at whose end the Cam soll.Um be jarring to avoid, I still have between base camp and a foam layer batten mounted ....
Document as soon as the snow is gone to try the bracket .. hopefully with great success :-)
If interested, send me synonymous pictures:)
Mail to darkdragon21@gmx.net
Antwort von Andreas_Kiel:
Hi,
in my Gummikuh are the fall of the iron cylinders predestined. The run on the upper part of those far enough away so that you have the camera does not have a barbecue. I have a pipe clamp to a short and relatively thick (vibrations) flat iron welded at the other end of the tripod screw and a short pen against twisting.
After 5 minutes at least, I think, and check the tripod screw. The remote control tape I fall along the system, the drivers head high to the right of the throttle.
Before the Lens belongs necessarily a UV filter. It is starting to fly to small and hard objects through the area.
Want to have O-Ton? Wireless microphone next time I stick in a suitcase on the tailpipe. The built-Micro is just noise and hurricane record, even if one only goes to the eighties. About the tailpipe coming - Attention conviction offender - the full unadulterated Einliter boxer sound over :-)))))
BG
Andreas
(PS: No, with the FX1, I try
not made.)
