Infoseite // Recorder-> Cam (Av-In) -> Firewire -> PC



Frage von Acer:


Hello,

I rummaged through the forum, but found nothing suitable. I would like s.Av analog tapes in VHS video recorder via the scart cable with my MV850i plug-in, and of playing there s.den PC via firewire. I did EVERYTHING that is in the manual and read through it followed me 1,000 times. What am I doing wrong?

Pros Pinnalce Studio 10 detects the tape net and the Cam synonymous net. How do I make it right?

Vilen Thanks in advance

Philip

Space


Antwort von Markus:

Hello Philip,

The first step would be for the Calculator to the camcorder as a playback devices (A / D converter recognizes). Do I have to activate the camcorder possibly one menu item so that analog and digital playbacks output from the DV output to be? Can you even use the camcorder as an A / D converter, or you have to first on a DV tape to record and capture in a second step, the digital video on the calculator?

In the second step is to try it, whether via the connection from the VHS recorder to your camcorder at all Picture and sound are transmitted (keyword: Scart-Ein-/-ausgang). The Scart-RCA adapter that usually accompanies a camcorder, a Scart output. You need s.dieser body but a scart input.

More Info:
About Scart inputs and outputs

Space


Antwort von Acer:

My problem is that my computer does not detect a signal. My VCR (with 2 Scart connectors) plays the tapes, but the computer recognizes net. I mah with the

Space


Antwort von Markus:

Keep cool! ;-)

Let us divide the problem into small, easily digestible bites:

How can you test if from your VCR scart socket s.der concerned with the available cable, AV signal is output? -> Exactly, close to the camcorder instead of the Cable Television s.dieses.

Does the recorder and the cable works, ie you see a Picture on the Television?

Space


Antwort von Acer:

Yes, with my SCART cable already, it funzt ...

But only s.TV

Space


Antwort von Acer:

"Markus" wrote: Keep cool! ;-)

I'm keeping cool, but I could destroy this yuck Recorder

Space


Antwort von Markus:

Okay, that was an important step. Both recorders as synonymous cables are fine.

The next step is to teach the camcorder that he will accept the analog playback ". Since I do not know your camcorder, I refer s.dieser place on the manual. What's in it, as you have to do?

Space


Antwort von Acer:

First, I want a blank cassette einlgen (hab ich net, but got on the 80min. Tape approximately 5 minutes between the last recording, and my current problem)

Then, an AV cable (Scart) stuck in the input and press the Rec / Pause button to aufzuzeichen on tape. Then start the VCR. It should, according to a Picture instructions to be seen. I got the cam via FireWire s.The 1394 PC interface is closed and waited in vain for an incoming signal.

Conclusion: Cam detects analog signal net. Why?

Here I have my cam is already installed, so it can participate ago

Space


Antwort von Markus:

The description calls for a recording to MiniDV. A looping is therefore not possible.

Drag the Firewire cable from the camcorder s.and reports ...

Space



Space


Antwort von Acer:

But does A / D Converter is not that analog signals will be "live digitally converted"?

Space


Antwort von Acer:

The display only shows "DV IN" when I plug in firewire, nothing else happened.

From the VCR, I can take net.

Space


Antwort von Markus:

"Philip" wrote: But does A / D Converter is not that analog signals will be "live digitally converted"?
So I would understand, but perhaps did not know the interpreter, who translated the Japanese instructions in German? ;-)

Is it because now, then with tape caching on DV?

Space


Antwort von Acer:

no, unfortunately, net

Space


Antwort von Markus:

"Acer" wrote: The display only shows "DV IN" when I plug in firewire, nothing else happened.
DV - In You do not need for your project! I suspect that the camcorder so long to register any analog playbacks until the DV jack of Firewire Male was released ...

Space


Antwort von Markus:

That's now all a bit overlapped ... With the description I'm not quite clear. How have you connected the recorder with the camcorder?

Recorder -> Scart -> RCA -> camcorder?

And then you should see the picture on the screen? What are the links s.Deinem camcorder (apart from the power supply) to?

Space


Antwort von StefanS:

And in the camera's menus, there is no point s.dem the AV INPUT must be activated, because otherwise the socket is an output?

Greeting
Stefan

Space


Antwort von Acer:

no, shit, the funzt net. I'm going again on the recorder in the living room and take with another cable to see if the connection works.

(The cable that I use Canon of grad is supplied)

Space


Antwort von Acer:

"Stefan" wrote: And in the camera's menus, there is no point s.dem the AV INPUT must be activated, because otherwise the socket is an output?



But, I've enabled synonymous (thanks, just before grad) but it does still net.

Space



Space


Antwort von Markus:

"Philip" wrote: ... and with another cable to see if the connection works.
But the cable You were already tested and that it worked ...

Space


Antwort von Acer:

I already use, I've always used and it has always gefunzt (it is the RCA? yellow, white, red cable with an adapter to plug in s.den Recorder)

Space


Antwort von Markus:

And s.Recorder you use the correct port? To connect to the TV?

The Scart-RCA adapter has a scart input, or can be switched?

Space


Antwort von Acer:

I can switch him net, which is only one time.
A / D I've checked.
AV-in cable connected
Everything you tell it,
It funzt


net

Space


Antwort von Acer:

I have my Canon scart cable and see grad looked at that (because of the 20's, the little metal connector plug should be put), only 7, is that okay?

Space


Antwort von StefanS:

And so is your scart times one of the only functions of the camera in the direction of television. What you need is a Male, the work of TV = VCR towards camera.

Greeting
Stefan

Space


Antwort von Acer:

I have such a synonymous, but he is a scart s.beiden end times ...

Space


Antwort von Acer:

Is there ne other way? I would not let the head drum of my analog cassette Cam play 50 hours, that's too much!
Are there any adapter to connect a Scart cable s.The CAm able to?

Space


Antwort von StefanS:

If I understand it, is the scart times that you are using only an adapter. With more appropriate words, the Kebele that is in the camera, is a 3-pin jack and the other end consists of three RCA plugs that you're in turn, this adapter.

If so, and your VCR to make matters worse still synonymous RCA should have time on the back and this time RCA outputs should still be synonymous, but then just let time the scart adapter and shut off the three RCA Male directly s.VCR at.

Greeting
Stefan

Space



Space


Antwort von Acer:

My VCR has 2 x scart connections: for TV and for the VCR / Decoder

My cam has Firewire, USB and AV (only a 3-pole jack =?, It looks like a normal headphone plug out)

VCR with scart adapter for RCA yellow / white / red in s.Cam
AV connector attached. Nothing happens

I kapiers net

Space


Antwort von StefanS:

"Acer" wrote: My VCR has 2 x scart connections: for TV and for the VCR / Decoder


Bad luck, then you need an adapter, the IN / OUT can be switched.

"Acer" wrote:
My cam has Firewire, USB and AV (only a 3-pole jack =?, It looks like a normal headphone plug out)


Exactly the one who looks like a headphone plug, I mean. Yes, 3 pins, because video (1 "pole"), Audio L (1 "pole"), audio right (1 "pole"). In fact, the thing even has a 4th Contact, namely mass, if I remember correctly.

"Acer" wrote:
VCR with scart adapter for RCA yellow / white / red in s.Cam
AV connector attached. Nothing happens

I kapiers net


Then again:

You're using the adapter that was supplied with your camera. This adapter allows the signal only in one direction through, namely of the camera to the TV / recorder.

In the other direction of the adapter receives no signal. Thus, although the signal coming out from your VCR, but in the end of the adapter, which does not sends the signal to the next camera is.

The camera manufacturers can save just s.allen corners and ends!

This IN / OUT adapter's s.allen ends and corners, unless you live in the country, have not looked at your profile :-)

Greeting
Stefan

Space


Antwort von Markus:

What a difficult birth!

Space


Antwort von Acer:

"Markus" wrote: What a difficult birth!

Nope, I came out pretty well ;-)

@ Stefan

Thank you buy, I should probably nen another adapter, so be it,

Finally, my problem is none left, was probably synonymous ne severe birth

G

Philip

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash