Frage von remone:
Hello,
I have a "T. Bone SC 450" (Micro) and the "studio Swissonic usb d" (Audio Interface) and of course a XLR cable ..
Everything is connected .. But how does it work? How can I get a sound from the Micro?
Thanks in advance in advance ..
edit: http://www.pcrecording.com/studiod.htm
this is the interface the way, .. ^ ^
Antwort von meister hubert:
lol too expensive, but not grade specific interface and a micro tbone .. :)
naja hättste times previously to ask ...
First: if the micro-ton comes ... then you will have in any case have gone wrong;) which is even theoretically possible, but not highly recommended.
but if you bring micro want to run .. Adhesives beine at:)
ne ok now to the point:
micro-insert and look where the buttons where the "48V" draufsteht is. that must be activated. then you need to turn up the preamp a bit and then when you make noises into the microeconomic front should turn down the level meter. if not, something is broken, what you have connected the wrong, the thing is nich s.stromnetzt or the interface is made of;)
if you've managed that, it had only via firewire or usb pc s.den connect the interface and then in your aufnahmeprgramm routes.
done =)
