Frage von sebihug155:
Hi together!
hab mal ne frage to the camera tripod thread. And while I'm s.bauen s.einer steadicam like this "
Antwort von srone:
is looking at the screw to a non-metric (European Norm) 1 / 4 inch screw, which have a diameter of about 6.35 mm
and has a different pitch, maybe you can be a locksmith help / metalworker from your surroundings there.
lg
SRON
Antwort von Bernd E.:
... what a screw em as best I suppose to attach to s.stativ di camera. We in Switzerland gibts da only too great and too small ... For fixing of still cameras, camcorders, tripod heads and the like, the world has in fact only two different-sized screws or threaded: 1/4-Inch and 3/8-Inch. I am not quite clear what you are looking as any special size, but really can not fit the front and rear? Which parts exactly do you want to connect with it?
Antwort von srone:
@ Bernd.e
He probably tried thinking hats with m6 and m8.
lg
SRON
Antwort von sebihug155:
@ SRON. yes exactly what I have to answer .-) many thanks for the! it would with 1 / 4 "attempt.
Antwort von srone:
Of manfrotto has a pretty good quick and cheap for about 50, - ¬ if it does not work with the screw, would you eight of the targeted construction of a digital camera, however, imperative that the soil solid contact with the pipe piece has a montage abschluß see at long screw makes you break your camera to continuous connection (-> too much shear force)
lg
SRON
Antwort von sebihug155:
Thanks for the tip! really had the sense, the whole with a wooden board be secured so that the camera is always on the "floor". what a schnellwechesplatte do you think? or has no preference what ..?
lg
Antwort von mtd77:
Hi,
I have built the same Steadycam!
Sher is getting used to deal with it (mainly because s.Anfang tends) to hold the camera wrong. But with time, they can be quite helpful.
The Fixierschreube (1 / 4 "), I have a photo accessories business for a few euros. They have sowas usually in a Einzelteilebox if you're lucky.
I actually welded a steel plate with the rods - which holds! Fix - and before a hole for the screw to the camera gebort.
Works fine, but needs some s.Werkzeug synonymous ...
Enjoy!
Antwort von srone:
200pl-14 is called the flat, there are set with the bracket for under 50 ¬, but in principle there is no preference which plate.
lg
SRON
Antwort von sebihug155:
Ok, that's great!
Thanks again for the answers! 'll write it, has pointed worked :-)
lg
Antwort von pilskopf:
This is not a Steadicam but an alternative way to hold the camera. This really has nothing to with a Steadicam. The results will be synonymous dolle not really, I had built before I was synonymous a "steadies" from an old small tripod, simply because rangebaut one Qeuerstange, bottom weights, tuned and ready. Not bad but who had once had a real steadies, will remember the very very big difference, a Steadier's just something completely different.
