Frage von Vogt-production:
Hello
I would like to come in the service mode of the TRV 900E, to where the
"Set edition size.
But I simply start times of at the front:
I have purchased a camcorder from Ebay was unfortunately scrap, because the picture was greenish. After I did do a CT, I discovered that the repair there, too expensive (880E) was somewhere else, although we only asked for my 400E but that was still synonymous zuteuer.
Then I learned that there were parts of AVC Cologne and ordered the chip.
With a tiny part in a triangular shape and 3 * 14 PINs, daruauf are each 3 boards where duchgesteckt the pins (0.3 mm).
the distance between the PINs approximately 0.3 mm.
Unfortunately, there Cip and not as a complete board.
So I had to desolder all of PINs with 0.4 mm holes and clearing holes
re-solder, solder without the spaces. (Not exactly easy, you need to mount, tiny tip, magnifying glass, etc.
The One and expansion is not synonymous simply sat s.Chipsockel just the screws damned dodass almost ausleierte the screw head. I could put on no-longer synonymous during installation and sofest
had to reduce the screws even.
During testing it was found that the colors were indeed ok, but if you at telephoto setting scharfstellte and then zoomed in to far, the picture was blurred.
After research here and in the net I found out that this error is due to an incorrect distance between the lens and chip, or at Fotoaperaten between Lens and Film, known Flange (engl. flange focal distance)
The 0.02 mm Flange may only play exhibit.
However, it should at Wechselobjektivcameras or Fotoapperaten with a "head" can be s.Objektivrahmen set.
Therefore, I have screwed the camcorder again, but found nothing like that, now I thought it might be because I had not put the chip base as solid as he had previously dranwar, (it) is a Rubber flange between.
But then I luckily came across a page at Slashcam
http://www.slashcam.de/info/sony-1000er-37864.htmlWo stand, dass das Auflagenmaß bei diesen Cameras per Software über
die Lanc Buchse eingestellt werden soll.
Ich fand heraus, dass es eine Remote control für diese Zwecke gibt
http://66.102.9.104/search?q=cache:jbLA99exXgUJ:www.soundmall.co.kr/shop/shop_view.asp% 3Fnum% 3D7591% 26code% 3D172 +% + 22service mode% 22 + sony + trv +900 & hl = en &
http://www.slashcam.de/info/sony-1000er-37864.htmlWo stand, dass das Auflagenmaß bei diesen Cameras per Software über
die Lanc Buchse eingestellt werden soll.
Ich fand heraus, dass es eine Remote control für diese Zwecke gibt
gl = de &
http://www.slashcam.de/info/sony-1000er-37864.htmlWo stand, dass das Auflagenmaß bei diesen Cameras per Software über
die Lanc Buchse eingestellt werden soll.
Ich fand heraus, dass es eine Remote control für diese Zwecke gibt
ct = clnk & cd = 9 And that is generally in Sony devices, is using a key combination in the so-called Service Mode.
http://66.102.9.104/search?q=cache:jbLA99exXgUJ:www.soundmall.co.kr/shop/shop_view.asp% 3Fnum% 3D7591% 26code% 3D172 +% 22service + mode% 22 + sony + trv +900 & hl = en & gl = de & ct = clnk & cd = 9 Also should be a software program.
Unfortunately, there is the remote control RM-95 appears only in the U.S., I have found only a fake one in Germany, which, however, will cost about 200Euro.
http://66.102.9.104/search?q=cache:HvVUiU1iBmAJ:www.ue-consult.de/ue_rma_d.htm+% 22service + mode% 22 + sony & hl = en &
gl = de &
ct = clnk & cd = 11 In Ebay U.S., there was an RM-95, but I do not know whether that goes for PAL synonymous.
The software company LynxDV of PC95, is no longer searchable on the Page Generator. (Probably this is illegal because it considered some of the Inch "is not an approved DV cam's" could unlock)
The trick with the key combination is not synonymous because the keys are not available on the camcorder remote control. (Apparently only recorder and TV)
Now I am therefore against the problem of how cheap the service mode and whether it comes to setting überhaut really Flange
Antwort von Stefan:
The RM95 would be NTSC or PAL no preference. I keep my fingers crossed that someone with a RM95 reports with you. An email address - and if it is only a temporary for a free mailer - would not be bad ...
Good luck
The thick Stefan
Antwort von steffen5:
The RM95 would be NTSC or PAL no preference. I keep my fingers crossed that someone with a RM95 reports with you. An email address - and if it is only a temporary for a free mailer - would not be bad ...
Good luck
The thick Stefan Thanks for the quick response
That with the email is a good idea, I'm having steffenrm95@web.de
achievable, if somebody has an RM95 he can email me, yes!
many greetings
steffen5
Antwort von Markus:
Hello Steffen,
Although I have an RM-95, but I will not repeat them. A service manual would be interested synonymous, however.
Antwort von Stefan:
Steffen, sometimes intense search for RM95 ...
There are hardware (IRdeo, Clone RM95) and homemade software (hamradio, kklanc) or purchased (Lremote) LANC Adapter Cable
Good luck
The thick Stefan
