Infoseite // Signal get balanced with phantom power supply?



Frage von Paul*Berlin:


Hello, a question s.alle technicians and electronics engineers among you:

I have the Millennium PP2B phantom power supply. I would like to know if this box can desymmetrieren balanced signals or signals symmetrically gets synonymous.

So option 1: Micro -> XLR Range -> Phantom feeder -> XLR to Mini-jack for the Camera
XLR-the road are now symmetrical?

Option 2: Looping signal from the zoom H4n (mini-jack) -> mini-jack to 2x XLR - Mixers> -> Phantom feeder -> XLR line
XLR-the-line would be symmetrical? Doing so would of course help a DI box, but if it is not necessary, I would like to avoid ...

Sorry if I understand this concern with professionally thrown up around me was wrong - Sound and I are pretty much at war, but I can not just get to do without him ...

Best wishes!

Space


Antwort von edewolf:

"Paul Berlin *" wrote: Hello, a question s.alle technicians and electronics engineers among you:

I have the Millennium PP2B phantom power supply. I would like to know if this box can desymmetrieren balanced signals or signals symmetrically gets synonymous.




No! You can desymmetrieren primitive adding shade and "Cons" just slaps together. Is synonymous. But you better get you 2 pieces 1-1 Übertragertrafos and solder them in your phantom power and output even as you build a 3.5 stereo jack it clean. This costs you 25 ¬ and you have a phantom power supply with good desymmetrization. This is not particularly difficult. If you have a Conrad in the vicinity, ask the people s.der component output as you have to rewire it, most of which have the full plan and are very helpful. You would have a practical tool synonymous round very favorable for the use of condenser microphones.

Hajo

Space


Antwort von carstenkurz:

The power adapter and the zoom, I would NEVER connect the outlet side each other, otherwise it was possibly with the zoom.

The adapter is simply by ground XLR inputs and outputs with a feed of the phantom supply limiting resistors.

To the output side order to go to an unbalanced output, you should use a pair of transformers. At least that's the most compact solution with no additional power supply. The complete range BEFORE the power adapter by the feed adapter will be free from interference from the transformer balanced, and only one behind it can be unbalanced by a short cable to an unbalanced input.


http://www.reichelt.de/?ACTION=3; ARTICLE = 48 085; PROVID = 2402

Away with the RCA jacks, two XLR unilaterally turn, can be on the other Page RCA Male or proposed as of Hajo 3.5mm stereo jack to it.



- Carsten

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash