Frage von hannibalekta:
Hi folks,
I want me a softbox, etc. from Hallogenlampen build. On the net you will find tutorials and yes vsenglischsprachige reads that you will be the eighth color, etc. (which can be somehow 5400K). Now my question - do you get lights that something can DIY? Or better said, just because something can be expensive lights - do you think there is a reasonable compromise that is to build a softbox can use?
Best Regards
Hannes
PS.: I think something in the nature (http://alexcampagna.blogspot.com/2008/04/diy-spiderlight-strobe.html)
Antwort von Axel:
Kinoflo is a large area with fluorescent light tubes, similar to a small solarium. There are special lamps for terrariums of Osram lighting (Link spill ') with the correct values. The linked DIY box is okay, but are not really ready synonymous expensive (googele Still Image Walser).
The color is not of concern if you only illuminate with the same lamp (White Balance).
Antwort von hannibalekta:
Ah, thanks for the tips (with the color vsdas .. somehow logical).
With neon tubes should probably make sure that the heart with a certain number will be activated, because otherwise it can be supposed to flicker. If I do my HV20 with regard to our Küchenneonröhre and all shutter-speeds browse, I find nothing in particular. What is meant?
Antwort von B.DeKid:
Neon lights
Light Color 11 (bluish light - Veggitation)
13 (warm / reddish light)
Unit price at 120cm approx 14 euros (tight 40Watt)
MfG
B. DeKid
Antwort von hannibalekta:
Thank you.
Antwort von wontuwontu:
Ah, thanks for the tips (with the color vsdas .. somehow logical).
With neon tubes should probably make sure that the heart with a certain number will be activated, because otherwise it can be supposed to flicker. If I do my HV20 with regard to our Küchenneonröhre and all shutter-speeds browse, I find nothing in particular. What is meant? Fluorescent tubes (not neon tubes, which is something else) in Europe are operated with 50Hz. This results in countries with a different frequency flicker (USA-> 60Hz). By changing the shutter at 1 / 60, this can be circumvented. Older fluorescent tubes flicker more, since the gas pressure inside is reduced. Pro-Light Banks are with 30-40kHz activated, the rest you can imagine.
Quite apart from the time you can dim Kinoflos, as well as by high-output with a short three or four times more electricity running (the light yield increases accordingly). The fluorescent bulbs of Kinoflo not cost ¬ 25 a piece, are not really expensive. Expensive Fixture and ballast are as synonymous, the difference lies.
Greeting
