Frage von KrischanDO:
Hello,
Time to turn and I cut little interviews. Expert sitting behind desk, compared to interviewers in the distance. Interviewer welcomes expert salutes back, the interviewer asks questions Expantwortet, all three times and her attention, then "Thank you" and "Goodbye"
I guess the experts with a radio link to the left channel, the interviewer with Micro Tripod on the right channel on the EX-1st
Level of scale and headphones.
When filling out the clip is assembled, I cut into pieces and put the soundtrack with "links" to fill and "justice" in the middle of the sounds and customize them with the pan control of the position of the person.
Then I select all the sound clips from and (nay, will finally PPRP) CS4, normalize "all the peaks to 0 dB.
The result sounds pretty decent, but the way is a bit fiddly, because I have the soundtrack sometimes frame-accurate cut.
Is there a slightly sleeker workflow?
Without having to compete even with a blender ...
Greetings and Thanks!
Christian
Antwort von mdb:
For me, does that sound as if you are cutting first the picture and then the sound separately. Somehow I do not understand.
Antwort von KrischanDO:
Hi,
First I build up of the takes the approximately three minutes.
For they are not suitable to answer every question on the first attempt or if the interviewer synonymous times tangles.
If the whole thing is suitably cut content, I polish the sound. And since then in a sub-clip question-answering question-answer-thank you-happy in there, I then cut up the soundtrack between question and answer in order to fill the experts who spoke only on the left lane, by "... "bring on both channels, and the questioner, who is on the right track, as well.
Clear? :-)
Regards
Christian
Antwort von newsart:
The workflow is probably as FinalCut OK. Without mixer is not much easier.
Antwort von Jollitop:
Why not first on your watchlist are cutting the sound and then? Then you have all the settings to make only once ...
Antwort von KrischanDO:
Why not first on your watchlist are cutting the sound and then? Then you have all the settings to make only once ... Because I would have lots of clip snippets, of which I do not even know if they come in in the final version, and that I must be careful when cutting.
Again, I turn the sound on the left and the right lane, depending on talks who. Frager left - an expert on the right. And that within a setting, several times. Make up for the use of "left" / "auffülllen law" should I cut the individual settings.
Regards
Christian
Antwort von Jollitop:
Mmm, if I record interviews, I first let the camera go through once without stopping completely synonymous only once. After capturing or copying I have a video file with a stereo soundtrack.
Now I would go and edit it in a piece of stereo sound - Adjust balance, process dynamics, etc. In the premiere, the volume may be in a separate sequence.
Then I take my original file, make the turn s.and the original worked. Now I have my picture in the timeline with one 1A sound. Snip, done.
Antwort von KrischanDO:
Hi,
I take with a SonyEX-1 on SxS cards.
Now, if the expert falters after five sets, we erstmal ventilate the room, and already available at a prop for the next question, because that is the expert just thought of yet, I do not let the camera continue. Otherwise I have s.Schluss a 15 GB file, with the work is not nice to use. Vergurkten a clip I throw away in ClipBrowser.
So I build up the 3 minutes from 4 to 7 clips.
And can still cut me, because of the "top up ..." thing.
Regards
Christian
Antwort von Jollitop:
Then I would still edit the clips 4 to 7 First tonmäßig and then cut, for example:
All the clips sit behind the other in a sequence.
Create soundtracks twice each to grade the Links-/Rechts-Auffüllen and subsequent mixing properly. Rest of sound and make corrections if necessary, the general picture.
New sequence in which I reinziehen the newly-created. The time now is how to cut a clip with the right sound. If you subsequently subject to amendment or Picture s.Sound want to make a general nature, you simply go into the first sequence. The changes are automatically incorporated into any cut part.
Antwort von KrischanDO:
Hi,
I'll try that at rest times.
Thank you for the persistent advice! :-))
Christian
