Frage von onkel_dick:
Hi.
I recently rotated my cam with a video, which I had connected a stereo headphones and an external stereo microphone.
As I watched the video tape just wanted to look at the action time, there is no sound of the built-in speakers themselves. I had taken the mic and the headphones and some tried something synonymous umzustelen in the menu, but nothing that helped, especially as I've previously synonymous nothing changed.
On the action can, as always, 12bit and 16bit as set recording. I had to 16bit. The speaker is as synonymous as often as I'll take, mono, but I do not think that makes a difference, or do you?
Could it be that the audio signal is now always auto s.The external connections is headed? If so, how do I add to it so I can use the speaker back?
Incidentally, was synonymous ne cassette play then attempts had previously worked for weeks yet. This time they had heard a sound synonymous.
I hope you can help me
Liebe Grüße!
Antwort von Markus:
Hello,
I do not quite understand your description. Were you after you have determined that the internal speakers are not of themselves, once tried to listen with the headphones the sound? What about the reproduction from s.Television? Is still something in the microphone jack of your camcorder? Is the volume of the internal speaker has been turned back entirely?
I had to 16bit. This setting is just right. Overdubbed is not already on the tape, but only s.Computer.
The speaker is as synonymous as often as I'll take, mono, but I do not think that makes a difference, or do you? No, it makes no difference.
Could it be that the audio signal is now always auto s.The external connections is headed? No, I think that is unlikely. I came, no camcorder between his fingers, which do such things. ;-)
synonymous ne had then tried to play cassette and weeks that previously worked yet. This time they had heard a sound synonymous. Where did you hear any sound?
Antwort von onkel_dick:
Yes, after I had found that playing through loudspeakers dne no sound, I plugged the headphones back where synonymous then sound came out.
S.TV playback, I can not currently test it.
Into the mic jack, and nothing more s.der volume control, I have experimented puts synonymous, so turned off-and on, but there is no synonymous change.
General question: What key should I take in the future as more? The 12bit or 16bit, I'm now a little confused, sry.
Kasstte to the other, which I had never tried: synonymous There I heard no sound from the speakers!
Hope I did not put me back too complicated :-)
Antwort von onkel_dick:
Sorry, but I've yet to try it just s.TV and it works on normal AV RCA, speak s.TV sound is present.
Antwort von Markus:
What key should I take in the future as more? I personally prefer a key signature, which is intended primarily of kindness. ;-)
The 12bit or 16bit ...? 16 bit would be optimal. So the two stereo tracks, which one has s.einem average camcorder while recording available to be used optimally.
Kasstte to the other, which I had never tried: synonymous There I heard no sound from the speakers! Then the thing is really clear sound through internal speaker does not work. Sound over Headphones (-connection) goes on synonymous Television (RCA connector).
Accordingly, it is likely that something is broken at the sound from the internal speaker. Since the speaker can barely walk even broken, I'm typing on an electronic defect.
Antwort von onkel_dick:
Ok. But would not necessarily be the elekrtonische defect corrected, you should not need the speaker?
Had only ne question that weighs heavily on my mind :-)
Hab halt a lot of work reingesteckt in the video and just wanted to make sure that the copy is transmitted via the Firewire port (or other connections such as USB, RCA ...) the sound.
Because only the speaker is broken, I guess, that's no problem.
Thank schonmal for the help!
Antwort von Markus:
Because only the speaker is broken ... That was a guess, no opinion.
... and just wanted to make sure that [...] when copying over the Firewire port of the sound is transmitted. How can you know without trying it on? Should read: Try it out and convince yourself of it! Otherwise, you could play back the images synonymous with another MiniDV - (or Digital8?) Device.
Antwort von onkel_dick:
So, I'm just been completed, with the capture and it works.
Not only that the sound was recorded, no, when I had plugged in the Firewire cable and pressed the REC piped up suddenly my intergrierter speakers in the Cam :-)
Comic technique that does what she wants.
On jedenfall it works.
Thank you for your help,
onkel_dick!
Antwort von Markus:
404ERR
Antwort von onkel_dick:
You will laugh when I tell you that happened to me just the same. AGAIN!
Actually, not just because this time it was not the speakers that did not work, but the connector for the external microphone. I have everything connected (+ headphones), to make a Tonte, but there was no signal through the microphone port.
Synonymous everything I tried other, Cam again identified but not so it goes.
Now again I think that something with the "direction of the signal" is not true. Since that time I've captured on DV output a movie ...
What are the kan lie here, I really do not know next.
Thanks for your help (hopefully)!
Antwort von Markus:
Somehow that sounds like after a "chaotic mistake". If I was a service person, I would traverse the camcorder time according to the manufacturer records ...
Antwort von onkel_dick:
404ERR
