Frage von DezorianGuy:
Sooo, I'm a long time to find a solution Steadycam been thought to myself and then just my (monopod) clothes rack to use, and it zurechtzuschnitzen me.
I just do not know if this is not anything too heavy, or I had a dream of ... well ... has not proved useful. :)
Here is a picture of my idea (do not know if anyone has come to something, there was no such thing in any case so far in the forum):
http://image-upload.biz/preview.php?file=b4a157403387a7e62f3954b7e.jpg
By the way: Why do I have red eyes? Hab but Redeye mode ... this means that rather then red eyes can be seen ^ ^;?
My Cam: Canon Powershot A710
But back to the clothes racks. The part (especially the ground is weighty) weighs a total of 5.7 kilograms.
My order to use Cam is the Canon HV20.
One problem is certainly, as this Anschraubvorrichtung / Andrehbefestigung above dranzubauen for the camcorder.
I have several other models of self-views mark, many of which too much effort, except that I have little experience or machinery to have to großartig drilling and sawing them.
I would be ready up to 300 euros (not more) or for a Steadycam, which brings the synonymous (las of these Glidecam 2000/4000).
But first I wanted to try a better alternative ...
Tell me your thoughts (Comments like "Waschweib!" More humorous or contemptuous remarks, I will hardly able to prevent). ;)
Antwort von B.DeKid:
Hi
Nice idea you have there, but should be "Tricky" are.
So in relation to the Camera Recording / Fixing my opinion.
As the above stands s.geflext be and with a thread versehn be.
A requirement for the camera you can for example, from a wooden board and a suitable screw tinker.
This bohrste NEN screw hole of the match and then bohrst seen the bottom of a CA 1 / 3 deep hollow in the previously drilled hole.
To be the screw head einzupassen / to sink
Imagine times NEN broom before s.dem du s.Stab (below) is still only weights monticola.
That should only ne times cheaper version and roughly have the same effect.
Among the "Red Eye", the function s.der Camera from and if it should happen do you do with the Adobe Photoshop Lightroom or away, since it is in these pictures of you do not notice is that so fully come no preference ;-)
At the awards or so things you need to give sowieso nix drauf ;-)
Alla wünsch tinker much fun.
For additional questions, simply register again then I send you my ICQ or email and help you like to NEN bissel next
MfG
B. DeKid
PS What would Mac gyver well done ;-)
Antwort von DezorianGuy:
thank you for this illustration ^ ^
and this construction (bar with weight below kamera above) can therefore be Steadycam scold. Of course it will not pefekte Steadycam, since I read somewhere times that with which the balance must be present, etc., pendant or something. here you have to balance themselves, right?
Antwort von Axel:
Of course it will not pefekte Steadycam, since I read somewhere times that with which the balance must be present, etc., pendant or something. here you have to balance themselves, right? A so-slight Cam like your HV20, you can not keep quiet like a little heavier. The coat rack is good for nothing, except of the very bulky form is 5 n.einfach too much of a good thing. Try the following first: Screw the Cam on tripod, then hold the folded tripod with both hands in front of you so that you are from some distance to see your display. Hike a bit with the camera around, and imagine it quite childish that the recording was a helicopter flying through your house.
This method has in comparison to pure hand-held camera two advantages:
1. Greater weight with greater concentration must be raised.
2. Your gaze direction is no longer the camera.
Please
really try it out, and post your experience here.
