Frage von Macba:
So, next problem:
I have an interview with a Canon HV 20 and a Rode-directional microphone. In a recording, there were very strong continuous, monotonous noise constant. Other shots were very good. When unsuccessful, I have the recording volume of the microphone had very high. The other is very low. However, the low shots in the Post Production too quiet.
My question: Is there advantage of the sound recording during the more quiet and to make it in the post-production applied retrospectively? Or where else can such a noise would come (Battery?)?
Thanks in advance,
Macba
Antwort von Jan:
Was the distance is not correct or was it really a noise of other origin?
Directional microphones are dangerous, because you should be well prepared.
Previously a manual would be first in the Tonaussteuerung HV 20 well, Headphones and connect a test before the interview make.
Even if the test is a little louder reingesprochen should have never been in the red area.
When the interview, the maker Microphone holds, he should be good to remember how far away it holds, and if it is a question, the microphone in his direction (which many forget).
If the interviewer believes the Mikofon, the cameraman partially react quickly. Not everyone holds the Micro in the proper distance and not everyone speaks with quiet voice.
Synonymous times I had an interview "verkackt" because the contact moved (with a loud organ) and I was not fast enough the level lowers s.der Camera.
I think times with a smaller level, you can do more than with a totally overdriven Level.
VG
Jan
Antwort von ruessel:
Or where else can such a noise would come If there is a brighter "sirren" is, it comes from the LCD screen. Simple test itself: the LCD screen with a finger touch - the Störton louder? Finger on top of the hot shoe to touch - the Störton disappears?
The solution would be to use either the LCD during recording zuklappen .... better shielded cable to use the Camera .... or send to service, this is supposed mistakes in some HV20 models and can be very pronounced in the workshop by a small soldering reduced.
Antwort von andi62:
I have an interview with a Canon HV 20th .. And what the Canon says so?
Level nicely with-10dB stop.
