Frage von Mona22:
Would like some Super 8 films of filming the screen with a mini DV camera. Can the emerging hotspot in the middle of the picture are rausgerechnet using a video editing program, or there is only the possible, a spec mirrors / frosted glass box used to reduce the effect to?
Antwort von frv:
Hello,
Give Google CineVid one, the program eliminates flicker.
Greeting
FRV
Antwort von Bruno Peter:
flicker is not a hot spot ...
Antwort von TheBubble:
You could brighten with a mask certain areas of the image to different degrees or abdukeln. I think the posted link explains synonymous of this correction procedure.
Ultimately, this is only suppress the symptoms, the quality is thus not necessarily better. I would do everything possible, even when transferring darker edge areas as best they can be avoided.
In addition, you will have probably synonymous with the filming still slight distortions in the picture that you'd have to correct synonymous. Again, this enables one should avoid as far as the filming.
For the best quality of a film scanner would be used.
Antwort von Axel:
For the best quality of a film scanner would be used. But Super 8 Super 8 remains synonymous after the sampling. Thus, if the "charm"
can be preserved of the old technology - I am referring to numerous requests, how to get through grit, bad steadiness and motion blur, or an
Old Film Creating Schmalfilmlook can - then a filming always enough. With a video transfer box of Hama (Umlenkspiel, ground glass), I made myself because of this hotspot, and the lower grade of the ground glass any good experiences.
Distortion, vignetting, hotspot and structure of the projection but keep within reasonable limits, if the material directly on matte, coated paper for photo prints (bright white, no grit) projected at the same angle and the camera sets up the projector. The angle of the projector and camera to the "canvas" was a mirror image) is about the same (angle = angle, the best viewing angle for each projection.
By projection, I can only advise. Each ground glass causes a greater variation than is given to the already soft reversal film. Nevertheless, the scatter is probably synonymous as a "glass screens" are not enough to scatter the hotspot by the light source: an insoluble dilemma.
Another tip: do not darken as usual to the projection normal. Diffused daylight is not (of course add to the side s.einem window) apparently helps to remove the hotspot, as well as the contrasts are better. Physically I can not really explain it, but it was to broadcast a movie on TV at least once a special, very low-contrast copy (called I think
lavender) moved, and you can immediately see the difference synonymous.
White balance on the "canvas" Needless to say without a film of himself
There could be problems with sound, with an adapter diode> 3.5 mm jack for example. The drone, which may be formed, is called a
ground loop. For RCA is there for little money so-called "ground loop isolators" for diode plug is probably Selbstbasteln asked.
Antwort von Mona22:
Super - thanks for the detailed instructions and tips. Rausholen hope that I may be the best. Thank you very much
Antwort von Ela77:
synonymous here you get something else, with no flicker and hotspot :-)
www.dia-and-film.de
