Frage von frischka:
Hi Folks,
I hope you can help me.
I've now bought the Hd 4850th
http://www.hisdigital.com/de/product2-385.shtml
My previous Nvidia I always had with it (an adapter, 1 port s.graphics card TV out and it then 4 branches, of which one of the scart adapter into the Television) is connected.
Unfortunately, this adapter will now work with the new graphics card does not seem to. Even when you start no picture comes on TV. Has the same connection with the previous Gainward HD 4850 works, however, was synonymous with tainted problems (;) crashes, which were synonymous but have different causes.
Can someone tell me, what kind of cable or as synonymous with whatever I can clone a reasonable picture on the TV?
Schonmal Thanks for any help.
EDIT:
Once again, here some new insights:
This Kabelweiche the color image with my old 7900 GTX Nvidia went with (the blue connector; PB / Video Out).
Otherwise, even these are multi-pin connector (; S-Vid Out) off, then 1x green (, Y-out) and 1xrot (; PR Out).
With the multi-pin connector, although I now have a color image, but in a very bad flickering quality. I had previously schonmal synonymous with the Nvidia, so I then put the other cable with the Kabelweiche.
When I connect the green tv s.den times, but then comes a sharp picture, but only in black and white.
The red is synonymous with nothing.
Can not be true but that now appear again only problems here.
And if not synonymous appears at startup picture on the TV, then it can indeed s.Drivers are not synonymous, right?
Would be great if you have ne solution.
EDIT:
Could it be perhaps that this card does not have a composite, and therefore the PB video out port has no effect?
EDIT:
Only once again to clarify it.
With the S-video cable I get a color image on the TV. Only unfortunately that is totally flimerig. But that was synonymous with all other cards like that. So I want to connect the card so synonymous over the composite connection. This has worked fine synonymous with the Nvidia, and with the Gainwar synonymous HD4850 I had a great picture.
I have now tried 3 different breakout cables. Everywhere the same problem. The blue connector is simply no picture. Even at startup is to see anything.
My question would be, especially if the card is now defective, or whether using the existing S-video picture can say that it can only be a cable problem.
If it is just a cable problem, so how do you get a suitable cable?
Please, please help me. If the card is now synonymous nix is good I have to stop them returning again, but slowly I'm really frustrated here.
Antwort von carstenkurz:
You can not expect to spend that different graphics cards, except on VGA and DVI signals can be identical or that get on a proprietary adapter card with another.
If you want to have a video output, you need to buy a graphics card that supports this explicitly.
- Carsten
Antwort von frischka:
With a Svideo to Composite adapter, I hingekriegt it now. The picture is in color and almost synonymous flicker.
But of course, is equal to the new problem.
If I have cloned the two monitors, and as I rode through the bookmarks in Firefox, captures the whole picture on the monitor see at spin.
It flickers on the whole Monito horizontal stripes that if you just sending you hinguckt consist of vertical stripes.
Like this:
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii
They flicker only briefly, and then are synonymous now gone.
So slowly, I can only laugh at something more than Ati. Once a problem is solved immediately appears on the next.
In any case, the card is now connected, just as it has been synonymous of Support advised me of HIS.
Does anyone know the problem? Can someone help you?
Antwort von carstenkurz:
What does the Manual THIS graphics card to use the video output? Which adapter are included?
- Carsten
Antwort von frischka:
It was not supplied adapter and the manual is a joke. Somehow reminiscent of Überaschungsei.
The Support Of His gave it to me now, as recommended below.
Did it to composit hingekriegt now the svideo adapter and the latest drivers with 9.10b.
Thanks for the help.
