Frage von Hoschy:
Hi Community,
to be able to do sports photography, I have increased my SonyDCR HC90 with a Fingercam including a LANC module. After activation of the action on the LANC interface, the camera jumps by default in the TAPE mode. Recording is via the analog input, however, requires the EDIT / PLAY mode.
A mode change is not about LANC possible. LANC controls only the main features (camera or recording / off).
Is therefore in the possibility SonyDCR HC90's internal menu to configure it so that is directly addressed to start on the EDIT mode? Otherwise, the CAM in the desired fashion in standby mode must be stowed in a backpack, which would charge the battery in the long run, of course :-(
Thanks for your hopefully many posts!
The Hoschy
Antwort von Stefan:
Yes, the recording LANC commands for start / stop recording when the camera mode, and-in-player mode are different.
When activated cameras could freipopeln by other IR remotes (RM Schlagmichtot with Service at any time), hidden buttons s.der IR-FB or make do with widgets with record button. You can try, so if you get stuck.
The idea with the widget may not be as good because the widget could be synonymous to try to reprogram the camera. At this point, before talking with the Manufacturer of the widget ... maybe synonymous is a new product on the market ;-)
When a widget is not working and there must be a wired LANC remote control, I fear that craft work including programming a ¼Controllers is necessary. Not impossible, I have seen plans for this, but still demanding. If someone in this direction which has before, maybe this is useful ...
http://www.boehmel.de/protocl.htm
http://home.tiscali.cz:8080/~cz056018/lanc_a.htm
http://www.keene.co.uk/pages/downloads/dnl_control.htm
Good luck
The fat Stefan
Antwort von Markus:
(RM Schlagmichtot with Service at any time) This is the SonyRM-95, a wired remote control for the Lanc interface, with which you remotely control a camcorder completely synonymous, and take effect on the program for a camcorder.
As far as I know, is the availability of RM-95, the real problem. Currently, she is likely at best to get on eBay to be (you have to see regularly thereafter).
Antwort von Stefan:
Look at the Cam-Eye on SPORTS ...
Flyer's Camera Shop - Air Action GmbH
http://www.air-action.de/AA-shop2.html
Good luck
The fat Stefan
Antwort von MiXMaster:
Hi you two ;-)
Thank you for your informative replies. If you could spend the net one, I'd do it!
For building a LANC controller and the programming of the SW, I am unfortunately not experienced enough. From the widget solution, I prefer to let their fingers for the same reason.
Use my existing cable LANC module provides the Cam-Eye SPORT to confuse similar, synonymous, it has the identical features. The only way the mode change is therefore probably the SonyRM-95 is what used went out this week for 55 ¬ 's in Ebay. Depending on the software install and it could fit them.
Thanks again for the advice and Arividertschy who Hoschy
Antwort von Stefan:
I myself have the Camey (cable to the LED) and the Camey II (cable to the LED) and can Camey SPORTS (LED s.Druckknopfgehäuse) only estimate of the descriptions. Only the SPORT model can trigger synonymous RECs in PLAYER mode. BUT, the description is that the software be adapted to each model must s.das camcorder. Maybe you can exchange it at the wrong software version, if it with the RM-95 does not work ...
Good luck
The fat Stefan
Antwort von Markus:
Hello Hoschy,
schau doch mal in
www.hgvt.de whether to have a solution for you. Of course, the question is, how much it would cost, this solution (I do not synonymous know, but I would be) interesting times. ;-)
Antwort von Hoschy:
Hi Mark,
've asked for the remote control at HGVT. The 119 ¬ 's call for the device. Not exactly cheap, but if * the detailed descriptions are true then the price is right. It looks good as fairly robust.
* = Http://www.hgvt.de/shop/shop.php?mode=show_detail&lang=de&group=11&id=15&sid
So long, Hoschy
