Frage von nikobrandl:
Who can help?
I would like in a Still Image for example, a camera or a zoom with two seconds to carry out the edge. Therefore, I choose the waypoint at 2 s and set the frame in desired size s.die desired position, then the same for the second waypoint.
Unfortunately, the program remembers the settings (size and position, particularly in the second position frame) is often only after several attempts.
This costs time and nerves. What can I do?
niko
Antwort von A380:
Hello from Bremen,
UNTIL you have the slider for the time set, then the picture position. In other works around it.
mfg A380
Antwort von nikobrandl:
Welcome to Bremen,
Thanks for the quick reply.
Unfortunately, it solves my problem, because I think, just to do what you're saying. Once again:
I click on the course in Story-Maker/Kamerafahrt/Zeitlicher the waypoint for example at 2 s (the green bar of the waypoint is yellow, the red marker is above the waypoint: that's setting the slider for the time or not?) .
Then I set the frame in the desired size in the desired position s.die Picture.
The same for the second waypoint, etc. ...
Always the first time slider to the appropriate waypoint, then setting of size and position of the frame.
Or have I misunderstood you?
Greeting
niko
PS: The Strange Case dan is that sometimes it is already on the first try works wonderfully, but mostly just for second or third!
Antwort von A380:
Moin from Bremen,
schau Dir mal MadMagix his tutorial Magix board.
http://support.magix.net/boards/magix/index.php?s=9903a32e3c658780fb3806735ed1264b&showtopic=32422&st=0&start=0
I think it is the Tut # 1 Look closely at his hand movement. Evt. do you still get wrong. When I went there as it shows.
mfg A380
Antwort von nikobrandl:
Hello A380,
you're faster than the new Airbus! Thank you again for your reply. The tip with the Tut # 1 next to me has helped. I have found that:
If I use the waypoints as shown Tut # 1 "by hand" sezte, everything works wonderfully if I do the preselectable 2-s-edge waypoints use, the program my frame size and position is not (first time) - why always synonymous. (Are there some day as I try so far, maybe you have the same effect.)
But the main thing is that the problem can be avoid.
Thanks again!
Greeting from Upper Bavaria to Bremen
niko
