A friend has given me a stack of VHS tapes that I should bring for him on DVD. Not a problem, I thought I possessed a VCR, a SHARP VL Z 5 S (which may, according to Annex A / IN and the fingers on my camera performs wonderfully synonymous) and a Pinnacle card interface with Firewire input.
Good. So I have the scart socket of the VCR has a 21-pin adapter plug with the 3 wires connected to the Camera-AV port (red, yellow, white). Following the instructions there should already have a Picture appears on the camcorder. Does not. Conversion to A / D conversion, and also brought the camcorder connected via firewire capture card s.The synonymous no improvement.
Why is that? Think of the VCR, that he receives an input signal? And the camera that she needs to send something now s.den VCR? I Pull the adapter plug s.and close to the Television s.The scart socket, it takes a moment (as if the VCR switches), not to mention the Picture. Was observed on 2 different video devices.
So what to do ...? I now need about a Canopus ADVC or something in the way for the conversion? Why is mobility in the Instructions "camcorder for recording of external sources such as VCRs," but then if it does not do ...?
Thank you!
Greeting Sebastian
Antwort von Sebastian05:
I was struck with just another ... my 21-pin adapter plug of Scart to yellow / red / white or S-Video can be converted (CVBS and Y / C). At the signal variation, it should not be so.
Maybe I need a scart adapter with IN / OUT switch ...? Have since found in a review of the beginning of something here.
Antwort von Markus:
"Sebastian" wrote:
Maybe I need a scart adapter with IN / OUT switch ...?
If your Scart-RCA adapter is the one who was with the camcorder while, definitely yes. The said adapter is in fact a pure output, but you need an input.
exactly, the adapter was in the camcorder here. Then I will tomorrow morning once such a shift adapter for IN / OUT at Media-buying market and try a test basis. Will report the outcome.
Übigens: exactly the linked thread of you I had read. Just did not know whether the rausläft for NLE editing cards about the same thing. Thank erst mal!
Antwort von Sebastian05:
So, I had such an IN / OUT Adapter concern - and it does. Thanks for the help. The solution can be so easy. And Sharp was time to revise the instructions ...
