Frage von Tim.Krieger:
Hello!
I already have the thread on "Decoupled brackets" read, but still had questions.
I was quickly involved in a project, and is now facing a technology cabinet, which unfortunately was quite questionable zusammengekauft. I have several video blogs, and short documentaries with SonyDCR my TRV-950 and a Sennheiser MKE 300 Microphone rotate. The Micro directly on the shoe of the camera to mount because of the loud noise, unfortunately, absolutely not possible. Is there a well-fitting shock mount or swing mount, someone with good experience has made? On Sennheiser is the shoe-fastening so fixed, so you can probably difficult in a classical Shock Mount (these rings with the rubber inside) slide? Has anyone the time of Sennheiser MZS 6 swing bracket tried? Is the simple rubber cushioning? Are there any better?
Thanks for any tip!
Tim
Antwort von mikroguenni:
Moin,
MKE300 which has an internal shock mount. Capsule and shotgun are elastically suspended. The shock mount is very effective.
If the drive sounds are so loud that you hear it directly, the Microphone with on this course. Then, just Microphone with Angel.
Antwort von Tim.Krieger:
Hi, thanks for the info ..
Unfortunately, the shock mount of the microphone is not made for the 950th TRV.
the camera when I take the shoe, and 3 cm above the camera, think, then the noise gone, so they are clearly the vibrations.
I think I will me the MZS 6 for external turning arrange ..
Thanks and greetings!
Tim
Antwort von Jörg:
moin,
I have good experience with the EA made 86,
EA http://www.google.de/products?q=Beyerdynamic + +86 & btnG = Search & hl = en & show = dd
The decoupling of the fragile works bestens.Trotz impression in the seat assembly is quite solid.
Disadvantage:
The windbreak is determined by the assembly no longer fit, he would have to be reduced to a "Insbildragen" to be avoided.
Gruß Jörg
Antwort von Tim.Krieger:
Hi!
Yes, those shock mounts, I have been synonymous in the hand-held ..
The thing with the windshield because I was discouraged. We must Micro yes without windscreen mount in the slide, right? Since I am at the Mount will use outdoor shoots, I think the times because wind noise is inevitable, or is there a trick to the windscreen with the shock mount to get? Simply reinquetschen?
Regards
Tim
Antwort von Jörg:
Simply reinquetschen? I would rather not recommend, especially the technically difficult synonymous possible .....
Solution is more, the windscreen (fur) in length to compress.
Or a 2nd to buy and to adapt.
When shooting from the tripod it is recommended that a Montahilfe s.das Tripod to unscrew.
Antwort von Tim.Krieger:
Hello!
Hab hopefully just 2 flies with one stone killed .. Have a new Tripod on eBay auction, s.dem 2 extra rails for microphones, etc. are off. This should be done to the Mount. Thank you for all but the tips are so nice to have! And greetings to the next problems:)
Tim
