Frage von jules1234:
Dear User,
I stand at the following problem:
I should be responsible for the university to a machining center operations
http://www.ralfeggers.de/deutsch/fraesmaschine.jpg
Lösung: Camera im Innern montieren and draußen s.einem Bilddschirm show lassen.
Frage: Was für eine Camera kann ich verwenden ohne extra ein Schutzgehäuse zu konstruieren?
Anforderungen s.die Camera: Spritzwassergeschutzt (bekommt nicht viel Wasser ab); in der Maschine herschen sehr schlechte Lichtverhältnisse (evt. Zusatzbeleuchtung anbringen, aber was für eine?); die Camera dient nur der Pictureübertragung, sie muss also kein Laufwerk beinhalten; es existieren Kabelwege, eine Funkübertragung muss als NICHT eingesetzt werden.
Beispiel: Ich habe folgende Camera gefunden http://www.sanyo-video.de/.../videoüberwachung/.... What it says: If the light values from? What is with a 520 TVL Resolutionvon mean? The Picture is a very good, because it happens on a large screen is displayed.
To have written quite a lot, hope it stops now s.darauf not to respond. Would really nice if jmd report could perhaps synonymous already facing a similar problem was. Hope to many suggestions :-)
LG
Jules
Edit from Mod: Link shortened.
Antwort von Jörg+:
Hi Jules,
Many camcorders can be ferngesteuerung Lanc. As a spray could be a simple take underwater housing. Lighting hire with an old film in eingescheißten Lightbox. For the recording, you will probably a WW lens need.
Why not the Camera as a "third man" to be outside?
Regards
Jörg +
Antwort von smooth-appeal:
I would Camera synonymous affixed outside of me and more concerned about a safe lighting inside make. Adjust possibly 18W fluorescent tubes inside? The execution comes as synonymous for wet areas, that would be mEssinnvollsten.
Antwort von jules1234:
Hello Jörg,
the camera must not be moved, what do you do with Lanc? The Camera should be installed once and then it must no longer be moved. The idea I had been synonymous with the spray box. Do you have a link there for me? Similarly, when a link for the lightbox.
Do you have an idea but a camera, so what type, I am really still very disoriented. Because I'm not necessarily a normal camcorder pure wishes.
From the outside is not because poor visibility conditions. From the inside there is the advantage that the camera of the top "look out" can be. So it is extremely moist not synonymous. It may also be times that it is a two Sprtizer of the coolant abbekommt, but actually happened in the Height, where we do not want to install it, say because not much water comes out. It's just really a rather clever dadrum camera types to be found ...
Lighting: Are there really 18 Watt fluorescent tubes to the camera light enough to donate? So I'm spontaneously on the idea of a small spot came. But if the synonymous a fluorescent tube does, why not!
Jules
Antwort von Jörg+:
Hi Jules
Lanc> on a Lanc Kablefernbedienung you can remotely control functions of the camera - zoom, focus, start / stop, Still image, etc. If course, only if you have a suitable camera. But many have better consumer camcorder.
Spray> sufficient for you, you will find here www.ewa-marine.de. If there is only the splashing protection is something you can but synonymous from a Tupperdose build.
The problem is likely to spray on the Optics his / stay
Lightbox> you'll find on eBay. Advantage of fluorescent tubes is fairly uniform illumination. If your light source you have hot water if necessary a problem. Can you not through the glass because light and white interior lining?
Your camera proposal> Yeah, I for my camera settings with a similar camera synonymous times durchgetestet (OP Surgical videos). But was unusable because - external power source required, tedious handling of the Camera s.Body, inconvenient remote control camera on the external control panel. No firewire output. The biggest problem, however, was the close focus of about 1.5 meters. The dürfet synonymous with you a problem. It helps if necessary a Close up lens +1 or +1.5. Gibts zb at hama.de. I've got me for a SonyHC1 and HC7 Cam decided.
At your place I would look for a small camcorder with Lanc connection and recording to MiniDV tape scout - Tips, there are certainly lots of -. In a Tupper housing and in the machine with a mini tripod or clamp Manfroto (http://www.manfrotto.com/Jahia/site/manfrotto) attached. Recording on tape or via firewire directly to the calculator.
Regards
Jörg +
Antwort von Andreas_Kiel:
If you have a glass panel in front of the optics, you could possibly a special coating keep it that drops collect on it. For car, there is something already - possibly falls under the "lotus blossom" effect?
Antwort von Bernd E.:
... could possibly a special coating keep it that drops collect on it ... Or the glass rotates so fast that the drops are just weggeschleudert: Whether this system is not very cheap here but worth it seems to me doubtful.
Gruß Bernd E.
Antwort von robbie:
Very easy. An industrial camera in a Plexiglas enclosure and interior assembly, finished. The thing is certainly longer than a conventional camcorder, which is certainly there for some one hundred hours up the ghost. Because it lets you safely where a beautiful part find used.
Antwort von Andreas_Kiel:
Something like this?
http://www.elv.de/output/controller.aspx?cid=74&detail=10&detail2=20625
Called
Flycam, 640x480 - Frame rate is not specified (guess times, 30 or 60?), No 60 euro - probably because you can not make so much upside.
Records on the map, or via USB as a Webcam, it is great in a breakfast bag packed and with Velcro to attach the machine. Or together with an LED light bar and Batteries in a Tupperdose.
Had something new: the partial fix s.Futter a lathe and slowly run with a view of the workpiece ...
BG, Andreas
Addendum: in the printed catalog of WR, a frame rate of 25 specified.
Antwort von camworks:
or the
Aiptek z300hd. the hd is in 1280x720, since there is already a water-tight housing supply and it also has a component video output. is synonymous with remote control, which is probably synonymous with the visible disk of the machine work. by 2 bright LEDs in the camera, it could possibly be that you not even need an external light (you have to test). the ton, however, is a weak point of the camera.
technical data from a cheap shop:
http://www.yakoon.de/deeplink.jsp?PRODID=870695 A few screenshots of the z300hd (all pictures in the first posting of the threads are of the z300hd (not of the first posting can be confusing):
http://www.hackermovies.com/phpBB2/viewtopic.php?f=10127&t=83041 http://www.hackermovies.com/phpBB2/viewtopic.php?f=10127&t=82954 and here are a few video clips of the z300hd:
Antwort von jules1234:
404ERR
Antwort von Andreas_Kiel:
I thought s.einen strong magnets that I s.die machines inside folders and since I will turn the camera mount. Let's see how it is because of the vibration with looks ... Synonymous review whether the influence of magnetism, the picture changed! Plan B would be the good old screw :-)))
BG, Andreas
Antwort von smooth-appeal:
To donate to 18-W fluorescent tubes, enough to light in such cramped conditions, a useful picture to obtain.
The other questions you have meanwhile already answered.
