Frage von smooth-appeal:
Hi Folks!
I am looking for an audio interface with XLR connection and phantom power in our small studio productions themselves opponent to be able to, because some are not ready for a professional studio speakers plus costs to be paid.
Now I had of such a Yamaha part acquired (Audiogram), unfortunately is the sound I've recorded so far too quiet.
At the microphones can not lie, we have tried with several microphones (Sennheiser, Rode, Shure) and the sound is always damned quiet, even when all controls including Gain is fully up. If someone can tell me why this is the part I would keep hold otherwise, I need another device.
Who can give me a working Recommend Audio Interface, which gives me proper level?
Antwort von Christian Schmitt:
Hm, still sounds after nem user error.
I use the Tapco http://www.thomann.de/de/tapco_by_mackie_link_usb.htm and am satisfied.
Antwort von MarHeBo:
I use a Alesis Multimix 16th
http://www.thomann.de/de/alesis_multimix_16_firewire.htm
Since there is relatively little money directly ordentlcieh production machine with everything you need.
Antwort von thos-berlin:
And the "Mic / Inst" switch is set to "Mic"? Displays the LED park something?
Antwort von meister hubert:
you're on the important points not received:
How much money do you need?
how much a and outputs do you need?
What quality do you want to have?
with what program do you want to work? (possibly prootools, cubase etc. ..)
eg if you are the only eh ton for dvd's need ... then rich, 41 khz and 16 bit, noticing it on tv nem eh None: P
Antwort von smooth-appeal:
I now have a 24-bit interface and I can record with proper level, the images are qualitatively very well and now ....
smooth-appeal proudly presents: The Loose Contact
I could so sucks. Now I have a device that works and now spins the firewire connection - I still rotating through! Either the firewire port in the laptop s.meinem ass - I would find The s.beschissensten or the device is defective.
Recommendations are still welcome, s.besten on base so that the USB device works s.allen current computers.
I need: Minimum 16-bit, at least 1 XLR connector with phantom power for microphones and s.liebsten an equalizer for the main frequencies and including a compressor, if it eierlegende Wollmilchsau resist expected but should be: happy synonymous Portable (battery operated or powered laptop.
The rest is not so important to me, wanted to hold no more than 150 euros to invest because we are usually a professional speaker and the commitment it has already mostly his own studio.
Antwort von schlaflos011:
http://www.thomann.de/at/mindprint_trio_usb.htm
