Frage von MiXMaster:
Hello dear colleagues,
I am in possession of a Sony DCR-PC100E and am on some time ago
Aktikel encountered the following:
"2 Decrease the video camera's electronic" enhancement ".
In my experience all video cameras have a degree of electronic "enhancement". The picture output from even current CCDs is quite soft and lacks detail. Camera manufacturers design s.electronic circuit which reacts to changes in brightness levels in the frame and adds s.overshoot in the form of a black or white line to the picture. This is designed to make the picture look sharper. But if this circuit is adjusted too high, the resultant picture just looks "electronic" and unattractive - just the sort of 'electronic' look so much hated by the film fraternity.
You will find the adjustment of this circuit named variously as: "Contour" correction, "Aperture" adjustment or "detail" level. They are all the same thing in essence.
Viewing your camera on a good monitor, turn this "enhancement" down until you get the picture you like. It might be a small adjustment screwdriver or via a menu in the viewfinder. It might be called "Sharpness" in this context. You'll certainly find it on all Sony miniDV cameras between the VX-1000 and the DVCAM DSR-500Ws.
If your camera is a "domestic" (or consumer) camcorders it might not have any adjustable circuit. In this case, employ technique number 3 to bring about a decrease in "enhancement". "
(if jmd want to read the full article: http://www.videouniversity.com/filmtovi.htm)
Now my question:
Are there any sony dcr-PC100E so in what form one einstelungsregler always synonymous, and if so where to find him?
I've searched everywhere, I could not apply to the internet it still in the instruction manual or in the menu to find the cam itself. Vllt really sowas gibts in this cam or not, I'm just too stupid. Because of these various electronic traced not just makes for a soft look.
(This can be traced indirectly evnt those set in the menu under "Program AE"?)
Thank you in advance.
gruß
Peter
Antwort von Kiara Borini:
Even after a good five years now with my PC100 I did not know that then you can set anything without opening the camera or einzuspielen a new firmware.
Antwort von camworks:
that is, to German "electronic kantenaufsteilung" and is only in more expensive camcorders selectable / switchable. cheap camcorders have a fixed value (which is often quite high, programmed). designed to sharpen suggererieren, but in reality only makes kontrastsäume around edges that can be easily recognized at a high magnification of the image.
Antwort von wernergabriel:
Thanks for the replies.
So I can look in vain next how the value could change.
Can I remedy this by creating a filter effect before the screw lens, such as a With Softener, which is then superimposed on the picture with lighter blur? Is that reasonable? Or should we prefer to blur the with the shift to the post production, if at all?
And another question:
Under "Digital Effect" may be substituted for the pc100 belichtungszeit to the worth 1 / 25. Is it just as if you filmed with 25 frames per sec, so it almost like a film with 24/sek? Or is it better to choose in this case synonymous with greater exposure times and then make everything else in postproduction?
ciao
Peter
Antwort von Kiara Borini:
Generally speaking, each effect should begin in the Nachverabeitung and the material will be captured as genuine as possible and Color true.
And one gets the once aufgesteilten edges smoothed out again, without any additional losses. So synonymous here: post production, if you can not minimize the recording.
Incidentally you notice the difference significantly in the photograph, if one compares digicam and DSLR. In particular, if someone takes the trouble and the subsequent realized Schäfen on specially made masks.
Back to Video: 1 / 25 seconds only makes sense if the light is insufficient to 1 / 50 to illuminate. Otherwise, any effect in the Nachverarbeiung is reversible, if he do not like,.
Video is now time an interlaced, which looks not like movies. And as it emerges, this will become technically obsolete creed herandämmernde synonymous, especially in the HDV salvaged age.
