Infoseite // eternal Firewire problem



Frage von Heatmaker:


I have the Canon 600i and Windows XP Service Pack 2 Actually, everything has been synonymous times works perfect.
Recently, however, the camera of the computer side is no longer recognized. With the camcorder, but still seems to DV IN on the display.
In another computer the same problem occurs as with a trial test with Windows 2000.
The Firewire card and cable I would be excluded because of failure than with any other camcorder did not cause any problems.
However, repairs are synonymous very expensive, so you could buy for the price it might have a new one.
Jemmand you know of any solution yet?
Or is it bad s.den Firewire Ports of Canon, the company has time to maybe start a recall?

Space


Antwort von Markus:

"Heatmaker" wrote: I have the Canon 600i and Windows XP Service Pack 2
Up to this point would be for me the case was clear ( Wenn Firewire nicht (richtig) funktioniert > 1. Betriebssystem Windows XP with SP2)...

"Heatmaker" wrote: Wenn Firewire nicht (richtig) funktioniert > 1. Betriebssystem Windows XP with SP2)...

The Firewire card and cable I would be excluded because of failure than with any other camcorder did not cause any problems. Wenn Firewire nicht (richtig) funktioniert > 1. Betriebssystem Windows XP with SP2)...


... but here at last, the above reasoning does not fit anymore.

Wenn Firewire nicht (richtig) funktioniert > 1. Betriebssystem Windows XP with SP2)...

"Heatmaker" wrote: Wenn Firewire nicht (richtig) funktioniert > 1. Betriebssystem Windows XP with SP2)...

Or is it bad s.den Firewire Ports of Canon, the company has time to maybe start a recall? Wenn Firewire nicht (richtig) funktioniert > 1. Betriebssystem Windows XP with SP2)...


The connections with the DV) is indeed a big issue (see above link synonymous> 10 DV port broken s.Camcorders. From a product recall, I know nothing. Too bad that is suffering in favor of more parsimonious Prices and product quality more and more. ;-(

Space


Antwort von Blauermann:

I've had the Panasonic NV-GS3. The FireWire port is dead. S.der The funny thing I've found another 7 users had the same problem.

Then I sold the camera and got a new one.

Space


Antwort von DjDino (Toth Dominik):

A danger that can often electrostatic discharge or have different ground potentials (Each PC is connected to earth via the protective conductor, camcorder power supplies but usually not) should first be safe because his body and connect the camera before erstmal unloaded by first with the hand eg a bare METTAL site of a radiator or the ground connection of a socket (pin for the ground wire) and then touched the camera by then also synonymous with the other hand, the sheer Christelle connection of the DV connector (shield contact) affected.
And second because it is s.sichersten the camcorder with battery power (without AC adapter hanging off) s.den PC anszuschliessen (synonymous when in the manual as advised mains), so potential differences are 100% excludable.

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash