hi together would join the hpx 171, usb s.pc (Windows 7 Ultimate 64bit), wanted to install usb driver, I get the message please connect hpx, camcorder is not detected, what can I do? thank you
Antwort von krokymovie:
Did you or did you have the drivers installed? without the P2 Driver Greetings
Antwort von JetSetStar:
I wanted to install it, then comes the announcement hpx connect with usb, the kammera is not detected, and the installation is aborted PC-mode is on usb-device In 1394 to control off 1394 cmd sel on rec_p
Antwort von krokymovie:
you must not connect the cam s.pc to be able to install the P2 drivers. open set in the installation and the bottom row in AJ-PCD35 (; P2 drive) PCI driver a tick. then set the cam in the menu easy navigation> pc mode> USB device and ran the other PC USB port having fun. Greeting krokymovie
Antwort von JetSetStar:
Well again the same please connect AJ-PCD35 (P2 drive) PCI driver installation is aborted
Antwort von krokymovie:
You should not use PCMCIA drive (I have), so leave out the tick. So nothing in the list click (synonymous omit the cam), then it must go. I have just received a second successful installation s.meinen pc made.
Greetings
Antwort von JetSetStar:
the installation was successful, the camera is not recognized yet, is not synonymous appears nowhere in the Control Panel's strange, maybe the camera is defective, I can not imagine it is new do you have a tip for a PCMCIA drive?
Antwort von krokymovie:
do you have the cam set in the menu (usb not firewire) and then the 171 the PC mode enable important.: the mode push button and hold the bottom long before the thumbnails appear, push-button release and then again briefly hold for usb device flashes and that's it. I think your cam is ok, mostly it is a user error. an inexpensive PCMCIA drive I have some time on e-bay for about ¬ 14, - purchased. computer but in my new 64bit I can not install card. to upload and short review I use my old pc. I think it synonymous with your computer to the port for the older PCMCIA technology is lacking and thus gets you on the cam or a usb kompatibiles must avoid. or you still hanging around older 32-bit system (like a synonymous Leppien) another tip for viewing the original files of the hard drive directly invite you to kmplayer (freeware) down. opens and plays the MXF files from. here an info .
Greetings
Antwort von JetSetStar:
it was my god, well you should read the manual thoroughly many thanks for the help!
Antwort von JetSetStar:
oh yes, how do I get out again when I press mode stirs nothing I must turn off the cam is not always or
Antwort von krokymovie:
as you have already identified itself, has the advantage that the belles. but ... you must turn off the cam to move from the PC mode.
