Frage von FabeX:
Hi Folks,
've now finished my work, and one (at least for me) built entirely better work camera dolly.
Basic information:
- 2 rails with sleepers and aluminum profiles, tubes, each containing 2m (practically) to transport (for a total of 4m possible)
- Dolly base plate of 19mm Dreischichtverleimtem Wood
- On the floor plate has been affixed an anti-slip mat
- Walzengelagerte rolls (actually for roller skates), double-arranged
- Planning time: approx 15min.
- Construction time: about 6 hours
- Cost: just under 100 euros
In the future I will still 4pc. 45DEG-curved pieces for the rails to build. But here I must still consider how I can accurately Aluminum Pipes bending.
Moreover, the dolly will be additionally equipped with a spring-loaded suspension with pneumatic tires can be synonymous to work without rails.
Photos:
Antwort von domain:
Looks good.
How do you solve the problem in the open? The rail pieces must indeed be virtually torsion-free and can be adapted with wedges, etc. s.einen possibly uneven ground.
It should indeed, under all circumstances all 4 wheels with the rails have contact.
Antwort von FabeX:
Well, the rails are relatively stable. But yes, there are bumps on wood head:)
If I have such a case, I'll just take wooden head. Furthermore, one could Width, with sand-filled cushions take .. to adapt to the surface s.and were supposed to stay halfway in shape.
Antwort von FabeX:
Another option would still assemble on any height adjustable threshold of one foot () as in furniture. The fit is then simply an ..
Antwort von domain:
This is a good idea. Wooden head can forget that. The rails must be adjusted with a spirit level.
