Frage von zsolt:
Good day newsgroup
maybe someone of you a great trick in sleeves.
with me is a Hauppauge PVR 250 TV card in the computer (1 giga, 512 mb ram,
winxp) instaliiert.
it hangs a video gets out - but after 2 minute's to begin reproducing
to stop and bucking and picture and sound drift apart.
yes I know my processor is not created. But is there any
a trick or a small device that you can switch between them?
before I see a TV card with its own processor must buy ...
I thank you for every note
zsolt
Antwort von Lars Mueller:
zsolt wrote:
>
> Good day newsgroup
...
Perhaps there's once again with the name, in legible form and with
the necessary information? Then I will be happy again
completely read and just think about it.
Gruß Lars
Antwort von Lutz Bojasch:
zsolt wrote:
> Yes I know my processor is not created. But is there any
> A trick or a small device that you can switch between them?
Hello
The Calculator is nothing. Do not throw good money after bad
money! Prefer to give money for a new calculator from rather
Voodoo additives, at the end ärgerst you only.
Gruß Lutz
(Please name in the real sender, or "bump";)
Antwort von Christoph Schnauß:
"Zsolt" wrote:
> Good day newsgroup
Hm About the use of a name are you already have received
> For me is a Hauppauge PVR 250 TV card in the computer
For me synonymous
> (1 giga, 512 mb ram, winxp) instaliiert.
I do not know exactly what you with "1 giga 'mean. If your Processor
should clarify that please again.
I have my Hauppauge PVR 250 in a PentiumIII with 966 kHz and 512 MB
RAM stuck under WindowsXP it works fine without any further additions, my
Only problem is that I like it synonymous with other systems (FreeBSD)
wish, and since the problem is even more reliable drivers (see
FreeBSD mailing lists)
> It depends on a video device that
For me also, and there are absolutely no problems. But: what a
VCR's that? I have an almost 1 year old Grundig VCR
depend on it, and the synonymous works perfectly on the map.
> - But after 2 minute's to begin reproducing
> To stop bucking and
For me not.
> And picture and sound drift apart.
You should ask yourself on the Hauppauge page the appropriate instructions
properly and thoroughly read and then offer you the software
Download. Then everything should work as desired.
> Yes I know my processor is not created
That is wrong. Your processor should have no problems
> But is there any trick
There are many tricks, but for your problem, no tricks
Solution required only a little reading and a little berim Manufacturer
Software download.
Christoph S.
Antwort von Christian Zagel-Leschnik:
"Christoph Schnauss" wrote:
> I have my Hauppauge PVR 250 in a
> PentiumIII with 966 kHz and 512 MB
^^^^^^^^
I want to see:) If this calculator to work,
I still pack my times 33MHz 486/DX2 from the basement
and use it to capture in the future
PAL quality. For my 1.4 GHz-Rechnerlein creates
not so easily;)
SCNR
Greeting
Chris
Antwort von Christoph Schnauß:
Christian Zagel-Leschnik "wrote:
>> PentiumIII with 966 kHz and 512 MB
> ^^^^^^^^
> I want to see:)
Pfffff, one may not even allow NEN typos? Pick for the "k"
any other letters, one will already be right ...
* g *
Christoph S.
Antwort von Christian Zagel-Leschnik:
"Christoph Schnauss" wrote:
> Pfffff, one may not even allow NEN typos?
> Pick the "k" any other letters,
> Will then have an accurate ...
Ok, I take "A" stronomische Hertz:)
Greeting
Chris
Antwort von Arne Schween:
"zsolt"
wrote in message
news: c3e88f $ 2lgq $ 3@news.imp.ch ...
> For me is a Hauppauge PVR 250 TV card in the computer (1 giga, 512 mb
ram,
> Winxp) instaliiert.
> It depends a video gets out - but after 2 minute's to begin reproducing
> To stop and bucking and picture and sound drift apart.
Hi Zsolt,
Whats you doing again? Play the video recorder, which your
Calculator absorb, or do you want the output of the TV card with
the video recording?
> Yes I know my processor is not created. But is there any
> A trick or a small device that you can switch between them?
> Before I have a TV card with its own processor must buy ...
Ahem, the PVR 250 * is * a card with its own processor. In my old
Calculator (PIII 600MHz) is just the big sister of your card (PVR
350) the "13th Warrior" on - while I'm just a little bit of news to read and
writing this. The taskmanager shows for recording program between 0 and
5 percent CPU load. Quality is "SVCD Standard Play". With the WinTV2000
Software of the Hauppauge would, however, more than 50% CPU load only for
the representation of the TV screen. I use just the trial version of
"SageRecorders" (www.sage.tv). The TV shows a window only on request.
The processor on the card makes the whole compression work.
The processor of the PVR 250/350 could allegedly synonymous when decoding a
Videos help. But only if it is on the outputs of the TV card
is playing. Thus, I have not yet employed ..
Conclusion for you: the calculator will record VHS video, must be synonymous with
WinTV2000 work. When your calculator (1GHz?) Should no
Problem. Your problems sound more like an error in the
Software installation.
hmm, what synonymous the cause could be a false-operated
hard drive. I already have a couple of times seen Windows XP systems, the
Control panel is not correct: Check times in Device Manager
Settings for your hard drive (what is it for?).
Gruß,
Arne
Antwort von Olaf Schultze:
Christian Zagel Leschnik-wrote:
> PAL quality. For my 1.4 GHz-Rechnerlein creates
> Not so easily;)
If it _DEIN_ 1.4 GHz calculator fails to do something wrong. I
have been approximately 3 years ago with a P6/600MHZ 320MB Ram and a WIN TV
Map in fullscreen captured. With Picvideo MJPEG codec, and for a
Capture Calculator * obvious * second plate is not a problem
if the codec is not filled with quality level operates.
Here is an ongoing PVR 250 of a card he mentioned. The has its own
Hardware decoder and should probably even smaller claims.
Concern in your system for unrestricted data onto a blank plate and
then the synonymous ;-))
Or use the not so memory-intensive codecs if you capture with a
"normal" TV card working.
> SCNR
Ditto
>
> Greeting
> Chris
mfG Olaf Schultze
Antwort von Christian Zagel-Leschnik:
Olaf Schultze wrote:
> If it _DEIN_ 1.4 GHz calculator fails to do something wrong. I
> Have been approximately 3 years ago with a P6/600MHZ 320MB Ram and a WIN TV
> Map captured in full. With Picvideo MJPEG codec, and for a
> Capture Calculator * obvious * second plate is not a problem
> If the codec is not filled with quality level operates.
^^^^^^^^^^^^^^^^^^^^
Exactly, because even if I capture with PAL fullscreen, I want the synonymous
maximum rausholen.
That's why I think PIII/600 (128 MB RAM) has not synonymous
ausgemistet.
Because of that totally relaxed PAL Vollbild creates. Unfortunately, only
Win95
clean:)
There's even a Fast AV Master in it, which makes hardware MJPEG,
striped (synonymous across multiple disks) each with 2 GB of files and can be synonymous
otherwise no wishes left. OK, stuck in the system a couple of quick
SCSI disks. Quality is super.
Since, however, a synonymous WINTV PCI 1.4 GHz in my calculator is, I
that
Whole synonymous, of course, often been tried, but without
_extrem_
Luxations warrior I do not no drops out despite PICVideo MJPEG,
despite _sehr_ fast SCSI disks, etc. up to 18 quality does not
well
and just over 18 drops.
With the calculator is right for me but over the Jack the Grabber Network of
DBox2 streams to a locker at 6500 Mbits.
The calculator is well configured, CPU load at the grab between 15 and 85%.
Because until now I did not want me next to crick, I have it
Just so far as it is.
I've been here quite often read that it will be possible if I
times viiiiel have time, I will test it again.
And I have to say: TV capture, I have not tried, I
just want to videos of an S-VHS via S-video record.
Greeting
Chris
Antwort von Olaf Schultze:
Christian Zagel Leschnik-wrote:
> I have been here quite often read that it will be possible if I
> Times viiiiel have time, I will test it again.
> And I have to say: TV capture, I have not tried, I
> Just want to videos of an S-VHS via S-video record.
Hi Christian!
Often these problems framedrop _nur_ the capturing of VHS. Is
actually a well-known quirk of BT8xx successor chips.
The chip comes with the "bad line" in VHS / SVHS not properly clear ;-)))
Changing times the number of rows in the recording format of your now used
704x576, or 768x576 to 704x574 or Nx572
The even number of rows to values between 574 and
568 (but no less!) Decrease.
In most cases, will then succeed with the WinTV card with BT chip
synonymous framedropfreie shots. Presumably you can then Pegasus synonymous
on Stufe19 or even 20 high spin.
Gruß Olaf Schultze
--
private Money99 FAQ: http://www.frank-schliffke.de/money/
This is the Money99 Page http://www.money99.de.tf
About the Stöckl decoder: http://www.infotesys.de/MicrosoftMoney99.htm
suitable group news: microsoft.public.de.money
Antwort von Arne Schween:
"Olaf Schultze" wrote in message
Re: video on compi # # #
> Often this problem framedrop _nur_ the capturing of VHS. Is
> Actually a well-known quirk of BT8xx successor chips.
Hi Olaf,
zsolt wrote but that he had a PVR 250, which is not based on a BT8xx successor
Chip.
Gruß,
Arne
Antwort von zsolt:
hallo lars
my name is zsolt.und this is my real name.
If my German is not readable, the other had synonymous gemeckert.
do you still synonymous express?
zsolt
"Lars Mueller" wrote in news post
news: c3f4tk $ 2s6c $ 2@ulysses.news.tiscali.de ...
> Zsolt wrote:
>>
>> Good day newsgroup
> ...
>
> Perhaps there's once again with the name, in legible form and with
> The necessary information? Then I will be happy again
> Read completely and just think about it.
>
> Gruß Lars
Antwort von Lutz Bojasch:
zsolt wrote:
> Hallo lars
> My name is zsolt.und this is my real name.
> If my German is not readable, the other had synonymous gemeckert.
> Do you still synonymous express?
Hello
.. then just sit still the first or last name to, then
None more a reason to grumble. (Only if you are not quite the
improve the readability of the Shift key is used as is customary). So
You land in any case entirely autonomous in many filters.
Gruß Lutz
Antwort von Olaf Schultze:
Arne Schween wrote:
>
> "Olaf Schultze" wrote in message
> Re: video on compi # # #
>
>> Often this problem framedrop _nur_ the capturing of VHS. Is
>> Actually a well-known quirk of BT8xx successor chips.
>
> Hi Olaf,
>
> Zsolt wrote but that he had a PVR 250, which is not based on a BT8xx successor
> Chip.
>
That may be Arne!
But I have responded to the Christian and requires a stinknormale
WinTV in its 1.4 GHz Calculator On. _Ihm_ Was to try to tip the
what he has not succeeded. Should actually be seen in the thread,
I've responded to whom. The unnamed source poster in this thread
where an already reading eyes hurt, I would not answer synonymous
if I knew an answer!
He is so not even bother to issue reasonable to describe!
mfG Olaf Schultze
Antwort von Arne Schween:
"Olaf Schultze" wrote in message
Re: video on compi # # #
> But I have responded to the Christian and requires a stinknormale
> WinTV in its 1.4 GHz Calculator On.
Jo, stimmt, Du hast recht. A few postings drüber was still a PVR
Owner - I have something to read superficially.
> The unnamed source poster in this thread
> Where an already reading the eyes to hurt, I would not answer synonymous
> If I knew an answer!
> It is indeed not even bother to issue reasonable to describe!
I find this somewhat hard. You may be right, it was not even on
understand which device absorbs. But no reply so he can not
know what he has done wrong.
Frustrating, though, that zsolt only on the real name was received and the discussion
few answers to its core concerns so far left it. ;-)
Gruß,
Arne
Antwort von Olaf Schultze:
Arne Schween wrote:
> I find this somewhat hard. You may be right, it was not even on
> Understand which device absorbs. But no reply so he can not
> Know what he has done wrong.
My opinion about this!
No response suggests to think why no one responds. Who
really need help coming to the reading itself that nobody _warum_
responds.
No answer IMHO is 100x better than to imagine how long Real Name / Tofu
Thread, which the legibility of all newsgroups Unfit
make.
mfG Olaf Schultze
Antwort von Christian Zagel-Leschnik:
Olaf Schultze wrote:
> Changing times the number of rows in the recording format of your now
> Use 704x576, or 768x576 to 704x574 or Nx572
> The number of lines even at levels between 574 and
> 568 (but no less!) Decrease.
> In most cases, will then succeed with the
> WinTV card with BT chip synonymous framedropfreie shots.
> Presumably you can then Pegasus synonymous
> On Stufe19 or even 20 high spin.
Hi Olaf,
WE is the rum, `I've tested the following times:
Capturing with VD --
702 x 576, Q (UALITY) 16: 5 drops / min (on average)
702 x 574, Q 16: 5 drops / min
702 x 572, Q 16: 5 drops / min
702 x 574, Q 18: 5 drops / min
702 x 568, Q 20: 5-7 drops / min
768 x 576, Q 18: 10 drops / min
mhm.
Those things have frame sizes from 20 to 140 kb,
mhm again. Then I tested AVI_IO times because it is
even worse, on average, more than twice as
many drops.
How does this, when I with Q above 20 90 min
capture, and then with "Change so video and audio durations
match "save is then synchronously? I had previously
no time, the game completely durchzulaufen times. Wenns
synchronously would wär `s yes no preference, I then
24.4-6irgendwas fps, would be rich indeed. Or mistake?
Thank you for your crafts above instructions.
Greeting
Chris
Antwort von Olaf Schultze:
Christian Zagel Leschnik-wrote:
> Hi Olaf,
>
> WE is the rum, `I've tested the following times:
> Capturing with VD --
> 702 x 576, Q (UALITY) 16: 5 drops / min (on average)
> 702 x 574, Q 16: 5 drops / min
> 702 x 572, Q 16: 5 drops / min
> 702 x 574, Q 18: 5 drops / min
> 702 x 568, Q 20: 5-7 drops / min
> 768 x 576, Q 18: 10 drops / min
> Mhm.
Do you really then 702 set? There should be 704 or 768 remain. Only
the number of rows reduced! And off course overlay in VD.
But there may well be that your results are close to normal. VHS
video footage is noisy, as are almost always a few drops on.
5STCK/Min are actually little 50/sec where theoretically possible ;-)))
> Those things have frame sizes from 20 to 140 kb,
> Mhm again. Then I tested AVI_IO times because it is
> Even worse, on average, more than twice as
> Many drops.
AVI_IO I like to use synonymous. In spite of lost frames, there has been a
sophisticated function then the capture is still syncron.
> How does this, when I with Q above 20 90 min
> Capture and then with "Change so video and audio durations
> Match "save is then synchronously? I had previously
> No time to complete the game times durchzulaufen. Wenns
> Synchronously would wär `s yes no preference, I then
> 24.4-6irgendwas fps, would be rich indeed. Or mistake?
I no longer capture more of analog but via DVB-S, and if
but then via DV Cam via firewire transformer. But if I am correct
errinnere then in the Capture Settings button somewhere in the "Video
Sync to audio "Then when you capture, and again discarded Picture
and replaced by an equal (IMHO)
There is hardly noticeable while Ruckler, but the video remains syncron.
> Thank you for your crafts above instructions.
Look at the mini FAQ of this group, regularly posted of Ralf
Fontana. Here the links on Henrik Reimers and Stefan Uichrins pages
I was very helpful, but if you have better solutions, Analog
Capture still tinkering with a little luck. It should only be an indication what
mostly for TV / Video capture can lead to DroppedFrames.
As much as I know are not synonymous, and since use of DVB-S and Pentium
4 / 2, 67GHZ 768MB Ram, these problems are not synonymous anymore.
VirtualDub does not capture more, although I also
for DVB-S or an analog TV card (Chip Phillips) in the calculator did. I
have no VfW drivers for the hardware and without gehts not with VD.
mfG Olaf Schultze
Antwort von Valentyna Meyerson:
Olaf Schultze wrote:
Hi Olaf,
> Do you really then 702 set? There should be 704 or 768 remain.
nee, of course, 704 should read:) Sometimes I write faster
I think ...
> Is noisy video footage, as are almost always a few drops
> On. 5STCK/Min are actually little 50/sec where theoretically possible
> Would ;-)))
:)
I have the whole thing now tested with 90 minutes, and lo and behold:
Result quite passable, synchronously isses synonymous.
Now I can look to worry if my AV Master
einmotte ....
Thanks again
Greeting
Chris
Antwort von Christian Zagel-Leschnik:
Valentyna Meyerson wrote (of course, just nothing)
But I wars: the girlfriend hardly sits at the computer
nothing more true:)
Greeting
Chris
Antwort von Olaf Schultze:
Valentyna Meyerson wrote:
> I have the whole thing now tested with 90 minutes, and lo and behold:
> Result quite passable, synchronously isses synonymous.
> Now I can look to worry if my AV Master
> Einmotte ....
>
> Thanks again
Hi Christine Valentyna ;-)
The Zeilenverringerungstip most helpful if the tape is not even
vermurkst are. You will be synonymous various differences noted, if you ever
Yet another band capture. I have in any event in my _alten_
Attempts have often noted that each band Steele in a light
Knitter has a tendency to drop and synonymous Sceenenwechsel if you own something
zusammengestückelt had with the recording of the recorder. Take time
a tape where a mehrsekündige between 2Filmen (noise) pause drin
, which is so bad, sometimes even simply abschmiert VD ;-( (
Schön halberwegs it works out.
mfG Olaf Schultze
