[10:49 Wed,3.January 2018 by Rob] |
Blackmagic Design keeps the pace for Fimrware update constantly high. With the 4.9 Camera Setup, the Ursa Mini 4K is now also available for the URSA Mini SSD Recorder. With the 4.8 update the Mini SSD Recorder support for the Ursa Mini 4.6K and Pro had already preceded. It&s nice to see that Blackmagic also provides the Ursa Mini with the older sensor with corresponding updates. The other new features for the Ursa Mini 4K correspond in many respects to the 4.9 update for the Ursa Mini 4.6K. This allows switching between shutter speed and angle, low latencies at the SDI output, scrubbing support, autofill at lens metadata etc. are now integrated. Here is the complete list of new features: What&s new in Blackmagic Camera Setup 4.9 New features for URSA Mini 4K Added support for URSA Mini SSD Recorder on URSA Mini 4K. Lowers SDI output latency to less than 1 frame for live production. Lowers LCD monitoring latency. Added ability to switch between shutter speed and angle. Added scrubbing support for playback in camera. Added autofill option for lens manufacturers in metadata slate. Improved keyboard for metadata slate. Improved support for B4 lenses. Fixed zoom control bug on Canon 18-80mm T4.4 Fixed focus control on Canon EF-S 18-135mm f/3.5-5.6 STM and USM lenses. Fixed iris control on Canon EF-S 17-55mm f/2.8 IS USM zoom lens. Fixed bug where lens change was not recognised in metadata if powered off. Added new SDI Camera Control v1.2 documentation to URSA Mini Manual. New features for URSA Mini Pro Fixed a bug where pressing the ‘still’ button causes a crash. Minimum system requirements for macOS macOS High Sierra 10.13 or better macOS Sierra 10.12 or better A suitable USB 2.0 port Thunderbolt port for UltraScope and Media Express when using Blackmagic Cinema Camera or Blackmagic Production Camera 4K Minimum system requirements for Windows Microsoft Windows 10 64-bit Microsoft Windows 8.1 64-bit A suitable USB 2.0 port A suitable Thunderbolt port when using Blackmagic Cinema Camera or Blackmagic Production Camera 4K Installing Blackmagic Camera Utility Before installing the software on Windows, we recommend that you run "Uninstall Blackmagic Camera Setup” first. The Blackmagic Camera Installer package installs: Blackmagic Camera Setup Uninstall Blackmagic Camera Setup User Manuals While installing Camera Update on URSA Mini and URSA Mini Pro you may notice a pause around the 10% mark in the install process, this is normal and will continue installing after around 20 seconds. After loading the software on the Blackmagic Cinema Camera PL, EF or MFT, you may notice a slight flickering on the built-in LCD screen. This is normal and expected behavior. The flickering will go away after a few minutes of operation. more infos at bei www.blackmagicdesign.com deutsche Version dieser Seite: Blackmagic Camera Setup 4.9 reicht u.a. Support für URSA Mini SSD Recorder für Ursa Mini 4K nach |