Infoseite // + HV30 + Rode M3 Rode Video Mic

Frage von dän:


OK, as you see I am a newcomer (not just in the forum, synonymous in the topic (-:).
My question:
I want to use the HV30 with two microphones og operate.
So I hoped for:
The Videomic anyway has 3.5 mm jack, so no problem for the HV30. To be able to use M3, I have the adapter
http://www.amazon.de/Hama- Audio Adapter XLR -Kupplung-5-mm-Klinken-Male-Stereo/dp/B00006JABX http://www.amazon.de/Adapters-Klinke-3-5mm/dp/B000NT9NTC/ref=sr_1_30?ie=UTF8&s=ce-de&qid=1218030108&sr=1-30 so that I can use both Mics.
However, I have been a little "knowledge" angelesen, so I believe that the signal from the M3 is too quiet, huh? Do I look like a pre-amplifier (pre Hitec mobile audio 2)? Only there's the in-www.musik produktiv.de no longer ...

Quote: Unfortunately, we have this product is no longer in range.
Possibly occurs in one to two years, an alternative that is the moment but unfortunately not planned.


What now? I do not synonymous, why are no other affordable (less than 50 ¬) alternatives exist, the M3 s.den etc. HV30/PC adapter and the sound quality of the M3's not to give away ... Or I overlooked something?

PS: Please answer the layman ... (-:



Antwort von Markus:

Hello,

to the signals of two mono mics into a stereo jack connector einzuspeisen, you need an adapter, which is a Microphone on the left channel lead and the other microphone on the right. The mass is shared between the microphones and the only way to work.

The linked-3.5 mm jack is for connecting Verteiladapter of two headphones s.einen headphone jack and thought through in stereo. The benefit you nothing.

Whether it's a finished product for your application, I do not know, but it is not necessary in the adapter itself synonymous solder.



Antwort von dän:

Thanks Markus. So is the "Verteiladapter" top of nothing ...
I want the two are not synonymous constantly running, just sometimes ...

Your proposal with the self-soldering so I'm not talking s.aus the reason that I had no glimmer of it's going to be like and what I need ...

What's going on with the XLR to TRS problem for under 50 ¬?



Antwort von Markus:

"dan" wrote: I want the two are not synonymous constantly running, just sometimes ...
Theoretically, it should be possible, the signals of the two mono microphones synonymous over a Verteiladapter to lead to the camcorder, but it has a very big disadvantage: it is subsequently no longer possible, the volume of the two microphones set separately. Was one to the other loud and too quiet (even if necessary, it sounds like an echo), then this is no longer correctable. Whether it comes to other disorders, I do not know because I've never tried.

"dan" wrote: What's going on with the XLR to TRS problem for under 50 ¬?
For XLR (balanced) to 3.5 mm stereo jack (unbalanced) usdas came here in question: PRO SNAKE 20035 Camera Cable.



Antwort von DennisP.:

http://www.thomann.de/de/cae_78247_audioadapterkabel.htm
Schönes Teil, nutze ich selber für die gleiche Anwenung ;-)

Gibts synonymous with 3m Länge:
http://www.thomann.de/de/cordial_cfy3wff_yaudiokabel.htm
But this I can not recommend: For non-symmetrical signal paths do not use long cable - Episode: Possible noise

Is there other way that is synonymous XLR male instead of female:
http://www.thomann.de/de/cae_adapterkabel_xlrminiklinke.htm
http://www.thomann.de/de/cordial_cfy_3_wmm.htm
But for your Anwenugn with the microphones useless ;-)



Antwort von dän:

And what is with the great pre-amp? Do I need to then garnicht? And has not the Videomic XLR jack connector instead?



Antwort von Markus:

"dan" wrote: And has not the Videomic XLR jack connector instead?
The VideoMic has an unbalanced 3.5 mm TRS jack (male) and the M3 has a balanced XLR connector (male).

The VideoMic can directly s.einen consumer camcorder connect the M3 only in conjunction with an XLR jack adapter, which consists of the balanced signal is asymmetrical.



Antwort von dän:

That means I take the http://www.thomann.de/de/cae_78247_audioadapterkabel.htmXLR http://www.musikland-online.de/onlineshop_rovxa515894_Rode-VXLR-Adapters-MiniKlinke---. Html


Antwort von Markus:

So the PRO SNAKE 0782K001 Y-AudiokabelRøde VXLR adapter PRO SNAKE 0782K001 Y-Audiokabel
Maybe someone knows so this adapter and its wiring?






Antwort von dän:

What does "wiring"? And the wiring is important?
What is with the adapter?




Antwort von dän:

Is it worthwhile now to buy the adapter, or does nothing then because of the wiring? The adapter is apparently due to the problem of Rode designed so only the "Beschaltungskommentar" ^ ^ I was a little confused ...
http://www.musikland-online.de/onlineshop_rovxa515894_Rode-VXLR-Adapters-MiniKlinke--- XLR. Html



Antwort von Markus:

"dan" wrote: What does "wiring"? And the wiring is important?
The circuit shows the pin of one connector with which the other pin is connected. If any contact of the 3-pin. XLR to contact one of the 3-pin. Jack led, then the adapter is fully symmetrical.

You need an adapter, however, at the same time of symmetrically on asymmetrical adapted. This requires the XLR pins 1 +3 mode (see circuit).

And this info is not yet linked from the XLR jack adapters. Therefore, I'm going synonymous not say whether those adapters are the right ones.