Frage von kgerster:
I want a Lavaliermikro
and a Rode NTG-2 (directional microphone) to the stereo input of my camcorder (3.5mm stereo) to give you.
Both mics have (although mono) 3.5mm stereo jack (sound on both channels). I will get a Y-adapter worried
http://www.kab24.de/kabel-adapter/?func=det&wkid=176101286343810&rub1 = audio% 20HIFI% 20Video & rub2 = Adapter Cable & Item = 4155 & pn = 0 & sort = & all =
of which I do not know, however, he boarded as is.
Does not synonymous. No sound.
XLR jack I've seen it before:
http://www.deejayladen.com/__sca32327.aspx?pid=3
But do not synonymous the interconnection.
can I would like the signal of Mic A and Mic B on the left on the right channel, so I mix it later (post).
Does anyone have experience with something, or does it not, in principle?
Thanks
Addendum: I now found a Hama adapter:
http://www.hama.de/portal/articleId*23590/action*2563/searchMode*1/bySearch*43346
makes apparent what I want, but with mono jacks. I do not know how he behaves when the times are the stereo microphones used.
Antwort von domain:
Well of course, is that if you get a short Y-cable tinker with 2 sockets and a stereo plug. is material to it in electronic hobby store. Just the right or left channel (having the same signal) are derived from the A-Male s.die tip of the Y-connector and the left or right channel of B s.den first ring of the Y-connector.
Antwort von ruessel:
Eighth synonymous fact that both microphones are about the same loud, or is your camcorder's audio level control for each audio channel separately?
Antwort von thos-berlin:
The Hama adapter looks good only once. The existing stereo jack of the microphones provide the same siganl s.Spitze and Ring, and the shield to housing. The mono-couplings, the Hama adapter supposed to combine leading edge and housing and ignore the ring.
The Kontruktion should actually work.
Thus, the signal of one microphone is right next to the other recorded. (But only if the jack is stereo s.Camcorders really.)
Addendum:
The cable from the first link looks OK but actually synonymous. Actually, all stereo jack to 2x mono jack adapter are the same
Antwort von Markus_Krippner:
ui ... I just do not think quite so isses.
Are you sure that this is a stereo input s.deinem camcorder?
TRS does not necessarily stereo input.
For electret condenser microphones, you need that is still nen additional pin for the operating voltage of the microphone. Therefore, the mini-jacks are your existing (mono-) 3-pin mics synonymous.
... Mark :-)
