Frage von anna100:
Hi,
times I need a tip on the following problem:
I also want to cut, and pallet bzw.Vollbildmonitor a full screen on a TV bring. With my graphics card is nothing, so your tip FireWire - A / D converter - TV tries.
It runs Premiere Pro 2.0 In the Playback options: External device DV 720x576 eigestellt; converter is a XM2 to DVin, then export to tape, and works!
But only synonymous!
While the cut comes as visible to nix. If not on the camera monitor always a picture when the camera arrives at Aufnamebereitschaft stands? The DV cable is incidentally in the FireWire port of the Pinnacle card supplied did not know whether a name synonymous hatt. I use the already ever since the restore, there were never problems.
Can it s.dieser card, or I think fundamentally wrong?
Thanks in advance
anna
Antwort von Meggs:
While the cut comes as visible to nix. If not on the camera monitor always a picture when the camera arrives at Aufnamebereitschaft stands? What do you mean recording? The need to playback (VCR) are - just as when exporting to tape.
Antwort von anna100:
Hello Meggen,
is so clear. I want that but they told me the signal s.den SVideo forward without incorporated. Even when cut, not only during recording.?
Greeting
anna
Antwort von Meggs:
Hello Meggen,
is so clear. I want that but they told me the signal s.den SVideo forward without incorporated. Even when cut, not only during recording.?
Hi Anna,
Is already clear. This works usually synonymous.
If the output to tape, then stands on the DV XM2 - In and FireWire is synonymous.
What you see on the screen because of the XM2, if you play the timeline?
Gruss Meggen
Antwort von anna100:
...... just blue?
Antwort von Meggs:
Bei mir geht das schon, but not always immediately. Do you have Windows XP or Vista?
1. Step? and switch on - must be recognized.
2. Premiere step start. Go again in the general project settings playback settings.
For real-time playback device must be external DV 25i are. Closing the window again.
Now, the preview image on the monitor of the XM2 can be seen.
Antwort von anna100:
Hello Meggen,
True, it sometimes hooks, now. It's best when a new Project in the preferences, then restart.
Aaaber there is only one possible Ausgabeweg the premiere durchschaltet. Either full-on DV, or the graphics card.
I would like to find both at the same time to zb. not clear or color Ruckelprobleme fast times on a television picture should be familiar. This variant is of course synonymous questionable but it would remain to be seen how the (for me) worth.
Also, the full digital signal as it comes from the cut, parallel to the full monitor on a converter, and next ....
I think just now have read that it is the forum for a solution there, with "Home Hardware" in mind.
On large cutting space, it is certainly not a problem.
Greeting
anna
Antwort von Jörg:
Hi,
I worked quite smoothly. Cam with Firewire s.PC, and by analogy with the preview monitor connected, the bid will be on display with audio offset passed through
Antwort von Wiro:
Perhaps an additional comment on this audio offset.
Since there are always (unnecessary) confusion.
It makes sense, in a ext. Monitor the audio synonymous ext. to control.
If you are in the playback settings in "ext. Audio device" is a check mark is the sound when playing the timeline autom. output via Firewire and a PC's speakers are muted. When editing and Scrubber in the timeline on the other hand, autom. The internal speaker is used. When one frame show Next buttons in the timeline is also used int. speaker and the Picture synchronously s.Kontrollmonitor output.
If in addition to "Desktop Video" will take away the checkmark when playing the timeline autom. at ext. Monitor mode and in the premiere monitor displays a placeholder. To avoid the confusion caused by the time offset PC> Firewire can arise. This time delay is so god-given and can only be achieved through the use of a special cut card can be avoided.
Just minutes in a quiet test. There's a system behind it.
Greeting Wiro
Antwort von anna100:
Hi, me again:
Yes Is everything properly and clearly, but I want the Picture 3x simultaneously.
Please read again next up ....
Greeting
anna
Antwort von Jörg:
I can read as much as I want, exactly how you want it is for me.
Edit in the timeline to see s.Monitor on the display of the cam and s.Vorschaumonitor.
What is the cam with the preview monitor connected?
Antwort von WideScreen:
Preview on a TV or video system with
If you have a DV project, you can preview the sequence on the IEEE 1394 connection and one or VCR to a TV screen show.
Note: In HDV mode may not preview via or VCR to a TV screen. Instead, place the computer - or auto-mode.
1. Make sure the Screen s.den DV - or VCR and the VCR or s.den computer.
2. (Only for setup) Set the output to the screen one. For some devices, this car, while others must be a corresponding Menuoption be selected.
3. Click in the Source Monitor or Program Monitor Menuschaltfläche on the upper right pane, select "Playback Settings" and select the desired options from the following.
display the video on the desktop during playback
Specifies whether the playback on the monitor program is to be made. Disable this option so that only by playing in the "External Device" set the external screen is done. If the option "External Device" no device specified, "Desktop Video" selected, so that the playback on the monitor program is done.
External device
Specifies an external device on which the playback of the video is done.
Aspect Ratio Conversion
Determines how the pixel aspect ratio for DV projects is converted.
Desktop Audio
If the audio playback on the computer.
Audio of the external device
If the audio playback on a connected external audio device.
Export: External device
Enables the export to a tape for the specified device. This option has no effect on the playback on an external device during the export.
Disable video output when Premiere Pro is running in the background
Disable the video output on the external screen, if Adobe Premiere Pro is not the active application on your desktop.
24p conversion method
Specifies the conversion method for 24p material. See Setting of 24p playback options.
Antwort von anna100:
Hello,
I always hab'mich of the software veralbern leave. After Neuinstalation can be switched without hooks.
Thank you to see you soon
anna
