Frage von borisb2:
Did the test of CX11 in the new video actively read. This is a severe tremor in auto attested.
I have the CX 11 and can not confirm, however, the CX11 in kontrast poor environment (eg without significant brightening interiors, dusk) as a whole are bigger problems scharfzustellen. Problems in daylight, I have with the auto focus only on fast pans (but not surprised - HD content is more sensitive).
Can someone tell me whether the conduct in SR11/12 similar or whether there is a better solution?
Thank you
Antwort von borisb2:
Must again seek:
There is a reason why the auto is the SR11/12 of the CX11 differ or could be technically the same chip?
Have the feeling that the CX11 is a bit slower ..
Antwort von tommyb:
Based on Low-light shots?
Now, these cameras make it just like any digital photo clippers synonymous: They analyze the contrasts in the Picture and represent sharp (very simple terms). Are the contrasts hardly be seen (dark gray person against a black background), then everyone gets Autofocus problems.
This, however, varies of Camera to Camera and is dependent of sensor size and course of the signal routing.
Antwort von Zaun:
So they are synonymous, I had a few days after I daselbe problem I've had it verkauft.Sobald it was a bit darker, it pulsates, as it were.
I previously had the Canon HF100 is the perfect shop, but for my big hands do not grip gunug and the Battery is weak.
I have now ordered the HG20. Let's see what they taugt.Hier the forum can be found, unfortunately, not much to HG.
Antwort von borisb2:
Once it was a bit dark, it pulsates, as it were. Exactly the problem I've synonymous. What interests me is whether the optimal SR11/12 this works or not. Then I would like to decide if I exchange.
Judging only by chip size, etc. there should be no difference - but some tests say something else.
Antwort von otzelot:
the sr11 has some problems synonymous with lowlight, but subjeltiv better than cx6. a "pump" or "pulsating" I could not previously be identified. very handy because the manual focus button front. if the cam is not at all times then creates focus, I take the halt.
