Frage von matze22:
Hi folks,
times I need your help :-)
I'm looking for a connection cable BNC (Male) to S-Video (Male).
Is there such a cable? (Have not yet found)
Emergency could be so synonymous with an adapter to make ...
This here:
zum Bild and then of RCA to BNC with this:
zum Bild But is there not a direct power of S-Video (clutch) to BNC (Male)? (Such an adapter I could, unfortunately, until now synonymous not find ...)
Who can help me?
Greeting
Matze :-)
Antwort von tv-man_sh:
Sure you could wish for "BNC Male <-> Hoisiden coupling" with the presented of adapters you realize. It would be synonymous but also relative nonsense, because an adapter is not a signal converter and is simply a physical connection! I guess you are looking for a signal transducer Composite <-> Y / C signal. You lay a composite signal s.einen S-VHS input, it would make the picture black and white shows.
You may not synonymous of adapters can be swayed, often accompanied by graphics cards (Y / C composite). This adapter adapted obviously only physical connections, but does not convert signals to and assume the graphics card already s.der SY / C Output a composite signal is provided.
If you have a little Lötgeschick available:
click (scrolen to Composite Video adapter "
Antwort von matze22:
Hello :-)
Times I write a few words more closely, for what I need:
I have an old video mixer, but unfortunately only on BNC outputs (clutch) has ...
I would like this s.den S-video input on your TV!
The video of the video mixer output is a composite signal (CVBS) ...
Look here:
http://www.kabeluniversum24.de/S-VHS-Kupplung-auf-Composite- video Stecker_p2700_rx251_x2.htm
Since it says that it converts the signal ...
But is synonymous in the opposite direction, because this sort FBAS> Y / C should be changed ...
Greeting
Matze :-)
Antwort von matze22:
Hello,
it's me again ;-)
Have now found a cable:
http://www.computer-ambulanz24.com/product_info.php?products_id=114595982
and then to a Page of a normal S-video cable and on the other this adapter:
zum Bild If the work then?
If such a cable, the CVBS signal correctly converted to Y / C (ie, not in B / W)?
Many greetings
Matze :-)
Antwort von tommyb:
The adapter / The cable should have the CVBS signal into brightness and color and then split on the trace distribution.
Ultimately, however, is total nonsense. Your mixer FBAS out there and your target device is S-video signal get inside.
As long as there is no reasonable hardware Converter hangs between, you'll definitely no increase in quality (as it is otherwise known) received. And with the hardware converter is not necessarily synonymous. Then FBAS prefer to stay.
Antwort von MK:
S-Video to Composite is possible with passive electronics, so there is very cheap adapter synonymous.
Composite to S-Video, however, put an active transducer vorraus and therefore cost significantly more. In general, the converter you need it to recognize that they are also a power supply via AC adapter needed.
I would simply by mixing the composite s.den TV connect. A quality earnings through S-Video would only be given if the external converter is a high quality of the built-in TV, and the price is synonymous but much more.
Antwort von matze22:
Hello,
Now yes S-Video because the only reason the TV with my RCA video port is already occupied and the S-video is still available ...
I hope not synonymous with quality enhancement, which can not at work ...
With such an S-Video - to - RCA adapter is then only in one direction (S-Video to Composite)?
Is there not yet another effective solution (preferably without an external power supply)?
Greeting
Matze
Antwort von MK:
Is there not yet another effective solution (preferably without an external power supply)?
If you have S-Video input Composite s.TV not change it (works for some, then you can get an S-Video to RCA adapter), then not.
Antwort von matze22:
Hello,
Look again at the following cables:
http://www.computer-ambulanz24.com/product_info.php?products_id=114595982
As it stands "- synonymous video signal is transmitted"
Would it do so, or what is meant?
Greeting
Matze
Antwort von MK:
So again to the note-taking: There are no passive adapter is a composite signal into luminance (Y) and Color (C) = S-video converts, what you've linked there is a power of S-Video to Composite. This is with a capacitor to realize a few cents.
Anders rum elaborate technique is required. Or simply put, in green color red color is easy to tilt, but the colors should be separated is much more difficult and expensive.
Antwort von matze22:
ok,
wiviel would because that's what cost to the signal FBAS> S-video to convert?
So I think now a converter or something in between ...
Greeting
Matze
Antwort von tommyb:
If your television still SCART inputs? Get then a scart adapter with RCA inputs.
Or maybe you Holst you a switcher for multiple input sources.
Antwort von tv-man_sh:
wiviel would because that's what cost to the signal FBAS> S-video to convert? Reasonable cost signal converter Money and true. The cheapest way in the consumer realm heritage is still an old-effective available S-VHS VCR. For example, the good old Panasonic NV-FS90/1000 etc.
Many of these old devices are offered as defective, since the Now simply heads and the mechanics are scrap. As long as the electronics still work, these devices can be synonymous as a signal transducer of composite after Y / C are used.
