Frage von Modellbahner:
Behind camera operator for HF100
Because of the newer Canon cameras no longer have a wired remote connection that proved to me the question how can I of the Camera Tripod (rear camera operator) control.
Somehow, only the path via the infrared remote control. But how? When viewing my MD_Player occurred to me that TOS-Link cable into the eye (ouch), the sound over a fiber optic cable broadcasts.
Said done, and the camera with the remote control on the TOS-Link cable and fun to the key. Heureka!
You go, now I only have the mechanical part (the attachment s.Camera and resolve remote control) and it's done.
If completed as usual photos come with material list
.
I've finished!
The mount of Toslinkkabel made somewhat difficult because the Camera is aerodynamically gesteylt (Everywhere curves and no flat surfaces). In addition, the recipient is still in the diode synonymous folding screen.
How, then fasten. I have made 0.3 mm Neusilberblech may be synonymous of each other thin sheet metal to make a 15mm wide strip is cut and bent over the monitor. With cutouts for the joystick and the receiver diode provide.
To mount the Toslinkkabel was a piece of plastic pipe is used. For me square, but it depends of the shape of the used Toslinkkabels from.
On the stand side brackets were set up, actually for the tool mounting holes in walls is thought. The short tube (see picture) to prevent extraneous light and centered the Toslinkkabel before transmitting diode.
After extensive testing, is still adjusting the color and finish.
Material: 1 Toslinkkabel 1.0 m about 11 ¬, 3 tool brackets (similar size), a little plate for the cuff, plastic pipe and remains somewhat bastlerisches skill.
This should only be a suggestion to get a hobby or something to help as always synonymous.
Gruß Bernd
Antwort von Crookie:
Very good idea.
Antwort von mov:
Other options:
IR LED Desoldering, ran cables, LED s.Sensor attach the Camera
Antwort von Modellbahner:
Other options:
IR LED Desoldering, ran cables, LED s.Sensor attach the Camera Warranty ??!!!!!!
Antwort von mov:
I had an old Canon remote control lying around
Antwort von shipoffools:
Good, but old idea that with the fiber optic cable:
http://forum.slashcam.de/lanc-hkb-vt44522.html?highlight=lichtleiterkabel
