Frage von WerK:
Hello together,
have the following problem with the conversion of analog S-VHS Tapes: On the right side there is an alternating wide black stripes.
When I use a converter using Dazzle Hollywood DV Bridge, with S-VHS input. The converter I s.PC on the Firewire input. The program is used MAGIX Video de Luxe 2007 Pros. The PC used is a Fujitsu Siemens Amilo Xi 2528th Attempts had been synonymous with a so-called Videograbber made. Because these side strips in composite connection is not in S-VHS connection partially occurred, was the only other Bildqulität much worse.
For help, I would be grateful
mfG
Plant
Antwort von hannes:
Analog video is usually only 704 pixels.
It therefore lacks 16 to 720th Normally, the spread is 8 left and right. The only emerge on a Page, is to me.
Antwort von baerfot:
Something like we had recently, is apparently s.Recorder
Antwort von hannes:
> ... Is apparently s.Recorder
I think rather s.der Camera.
The VX1000 is synonymous, and is known in the computer on.
Antwort von Werk:
The recorder can not lie, otherwise I would have in the otherwise poor conversion with the Videograbber always have to have these strips.
Antwort von Markus:
What causes these black borders, it is actually irrelevant, since they lie in Overscanbereich and s.Television anyway not be seen. And if the recording somewhere Underscan watch, you can see the edges are not synonymous, because they're black. ;-)
I was never a SVHS video here (no preference on which recorder), the no black stripes s.den pages. The forms are synonymous s.waveform monitor according s.and seems to me rather systemic to be so.
Calculated that the uncircumcised Videograbber a video image to be delivered, says rather that the Picture of the grabber a little in the width has withdrawn to the unexperienced amateur not to raise questions and, if necessary, the right of return to strain.
Antwort von HeikoS:
Strictly, the black edges even outside the Overscanbereiches and are therefore not even in Underscanbetrieb displayed. You are just only to see if you look at the material s.Computer watch. But as a simple yes helps Crop and everything is good.
Antwort von Markus:
... and are therefore even in underscan operation does not appear. You are just only to see if you look at the material s.Computer watch. Maybe have the underscan times your video monitor to be set? ;-) Normally one sees s.Computer in Underscanmodus and a video monitor, the same image content.
Antwort von HeikoS:
Nope.
http://www.dma.ufg.ac.at/app/link/Basics: video .Postproduction/module/9039
