Frage von Jakob:
Hello, everybody;
I know that topic has been discussed on many occasions, but I had to my question, found synonymous after a very intensive search in various forums not the right answer.
I hope that I can help someone of you.
The following problem:
With a TMPGEcn encoded movie, I have inserted into DVD-Lab PRO into a DVD project (including the menu, ... etc.). Now I've been trying for a good 3 weeks to burn the DVD - without success. The problem may lie in my opinion only s.Brennprogramm. Although I have already received on Standaloneplayern playable DVDs, but these only go on some players. Often they are not recognized, or the player, it plays only at the 2nd 3rd od Starting from properly. At the encoder's can (I do not think lie). Have been synonymous since tried many and am now very precisely stayed with TMPGEnc. Here's a short list:
DVD-Lab PRO inkludierte burning software:
DVDs usually go, but there are often errors when burning. - S.Rohlingen> High wear.
TMPGEnc-Author included PHP burning software:
DVDs are not recognized of Standaloneplayer.
NERO:
at start-smart as a Data-DVD burned DVDs can usually only at the 2nd 3rd od Standaloneplayers start of play, plus they run only on some DVD players.
I use DVD + R Media
My question s.euch:
What programs (or Settings) burn your DVDs?
With Nero burning ROM, there is a setting DVD-Video, does it work? TMPGEnc NERO the setting of DVD ROM UDF / ISO "is recommended, what do you say? Meanwhile, I have quite many DVD unnecessarily destroyed and would not waste any more blanks. Can anyone of you help me?
Thank you for your efforts,
Jacob
Antwort von Gast1:
Sounds as if your burner has either be nuts or are your blanks not necessarily at its best.
Purchase a DVD + RW and test it before you aud DVD + R burning.
Antwort von Mr Jo:
Hi James,
.. at start-smart as a Data-DVD burned DVDs can usually only at the 2nd 3rd od Starting the Standaloneplayers be played ...
With Nero burning ROM, there is a setting DVD-Video, does it work? TMPGEnc NERO the setting of DVD ROM UDF / ISO "is recommended; A video DVD you MUST burn synonymous as such - that is NOT as described above, a data DVD, but a DVD-Video (only ISO 9660, no Joliet, Mode 1). That is almost a prerequisite for proper burning. I have with this setting in Nero (ie, the default min DVD video). 200 DVDs burned, no committee, several burners were used 755A (LG 4163B, LG 4167B, LG 4166B, Plextor 716A, Plextor)
Add your DVD project, just in a folder and then burn it with Nero as discussed - these DVDs run without fault and blame.
Greeting Mr Jo
Antwort von Jakob:
Hello, everybody;
Thanks for the tips. Yesterday I tried it, burn the DVD as "DVD" in Nero. The result frustet me greatly, because the DVD is playable only after several attempts to synonymous Standaloneplayern. On the PC, they (and all other previously burned discs running) correctly.
That with the DVD + RW is a good tip, it may be synonymous) will be played on Standaloneplayern (ie tested?
Meanwhile, I'm very (very perplexed and frustrated). How can there be? The burner should be okay, because he 1 is almost new and 2 I am with him, had already copied some DVDs or burn CDs) (with no problems.
All synonymous've ever tried on other DVD + R blanks. The result was the same.
Thanks in advance
Jacob
Antwort von Gast1:
That with the DVD + RW is a good tip, it may be synonymous) will be played on Standaloneplayern (ie tested?
Meanwhile, I'm very (very perplexed and frustrated). How can there be? The burner should be okay, because he 1 is almost new and 2 I am with him, had already copied some DVDs or burn CDs) (with no problems. Whether your standalone can play DVD + RW is either on the device's manual under "Technical data" or here: http://www.videohelp.com/dvdplayers
I still type as to suggest that your burner 'ne Macke has. But: you have all the tests carried out with the same material encoded with TMPG and which template (the template) have you used for TPMG?
Antwort von atrichter:
Hello,
So I can join because only the testimony of Mr. Jo,
the DVD in Nero as DVD-Video burned. Files from the Project (all!)
Importing into the Video_TS folder and off you go. With me so far all is running well on this kind of burned DVD in my circle of acquaintances as synonymous to each player.
Could it perhaps be that your problem is already used in the mpg's? Bit rate too high?
Antwort von Mr Jo:
Hi James,
it does not help, you have to test whether it is your burner or your system that caused the error or whether it s.den of you lies the data produced.
: You put your NOT just a copy-protected disc (eg, Terminator II) and rekodierst the Innhalt this DVD to a folder with Nero Recode - Recode does nothing other than edit down the main movie so that it fits on a Selbstbrenn DVD. In the settings of Nero further, please check if elected in the options to "choose recorder" DVD-ROM Booktype (Impossible) for all burners. Then, as the contents of "guest" described in the RED Nero DVD VIDEO_TS folder of your project, drag and burn. Does this DVD, it is s.deinen data. Does this DVD, then it is free to s.deinem burner - other burners ..
Greeting Mr Jo
Antwort von VolkerS:
Hello,
So I can join because only the testimony of Mr. Jo,
the DVD in Nero as DVD-Video burned. Files from the Project (all!)
Importing into the Video_TS folder and off you go. With me so far all is running well on this kind of burned DVD in my circle of acquaintances as synonymous to each player.
Could it perhaps be that your problem is already used in the mpg's? Bit rate too high? Was not really a guest, but I probably need to log in with what went wrong :-)
Antwort von Jakob:
Hello;
thanks for the many helpful tips. Get it now time to test everything and tell you then.
Best regards,
Jacob
Antwort von Jakob:
Hi Folks;
erstmal thank you for your great help. Meanwhile, I like of Mr. Jo had recommended my burner tested and re-burned the DVD in Nero. As Mr Jo has written, I then changed the book type setting of "auto" to "DVD-ROM", and lo and behold, the DVD is running on the Standaloneplayer properly. From this and need to be a bit longer to load though but otherwise everything is as it should. Thank s.dieser place!
Now, one last question, I created the DVD as follows:
Videos created in Adobe Premiere Pro 1.5, encode it through TMPGEnc source creator as DVD PAL 16:9 And finally the DVD with DVD Lab PRO created. Then just burn with NERO. Is there perhaps any settings in these programs is particularly note the need s.denen my problems might lie?
As I said on the DVD is now running smoothly, which have tested a total of 10x. Only the slight delay when loading the DVD in SAPlayer (other is the much faster) me somewhat puzzled. Can there really only have lain s.dieser trifle "auto -> dvd-rom"? What else is important in the creation of such a DVD to be considered?
Otherwise, thanks for the expert assistance, you did me the many frustrations the last few weeks removed. 'll Need to register the same time * g *.
MfG.
Jacob
Antwort von Markus:
Hello James,
The following aspect has not yet been addressed:
DVD + R or DVD-R? In this post you'll find more information about the topic and a link back to slashCAM forum where you can find again other factors that have an influence on the compatibility of burned DVDs.
Antwort von Jakob:
Hi Mark;
yonder is a lot, especially in terms of write speed. Would like the issue here is not to dig, but a question I should have. Could it be that with Nero 7 Premium DVD with only the settings of 1x, 2x, 2.4x, and "maximum" can be burned?
How can I adjust the speed as an 8x disc?
This should be a bit of a problem that is synonymous with me.
LG
Jacob
Antwort von Jakob:
Oh, sorry has done himself.
The other speeds are displayed only when an inserted disc.
LG
Jacob
