Frage von lobobravo:
Good day, dear forum.
It is never too late to learn something. The following issues with asking for answers.
I want to connect the following devices:
DVB-C Receiver, DVB-S Receiver, HDD Recorder Panasonic EH 56 and Television. (the latter has two scart sockets).
The primary goal is to provide the recorder with your choice of one of the two receivers incorporated - controlled by the recorder - and of course next TV to be seen.
The cabling is for me a book with seven seals. "
How can I manage?
I hope that someone makes the effort, with an old newbie like me.
Thanks in advance.
Antwort von steveb:
this is quite simple:
DVB C via SCART in DVB S receiver ... because of the HD recorder via SCART and then merely in the Television. Alternatively, if the recorder two Scart to make available, can be synonymous, the two receiver directly into the recorder lead. as a source of choice then, either SCART 1 or 2 to select the receiver thereof.
was that for you to understand?
Antwort von lobobravo:
To Stefan,
thanks for the quick reply.
Be with me tomorrow to the application in depth.
Then obviously the result.
Until then
Antwort von lobobravo:
So - I have the proposal of Stefan probiert. It is so only partially.
With this type of cabling via scart only the signal of each one of the two receivers and of s.Recorder there s.TV to.
I had - with my layman knowledge - assumed that the AV of the recorder, the desired signal could be selected.
In the current solution, I can only record of a receiver and not from the other parallel seen.
Maybe I have something wrong?
MfG
Antwort von steveb:
In the current solution, I can only record of a receiver and not from the other parallel seen. this is so hard to be possible. Then you have to look at the picture again in the television guide.
The only alternative: A inteligente AV switchbox. zb for Conrad, etc.
But beware ... many cheap AV Distribution deteriorate the image quality.
Antwort von lobobravo:
Good day,
in the following copy of the proposed solution of Panasonic.
This assumes that I, as a TV TH 37PV 60 with 3 scart sockets (as is now) and an AV on Scinch have. The recorder has 2 sockets plus AV RCA.
This fits the following solution. In a Television with fewer sockets will then actually just a scart switch.
I thank you very much for the help from the forum.
Will be happy here and read - if I may - synonymous active.
Yours sincerely,
Now the Panasonic Proposal:
Regarding your inquiry, we would like to recommend you the following link.
TH-37PV60 (AV1) - DVB-S receiver (TV) via Scart TH-37PV60 (AV2) - DVB-C receiver (TV) via Scart TH-37PV60 (AV3) - DMR-EH56 (AV1) via Scart
DMR-EH56 (AV2) - DVB-S receiver (VCR) via Scart
DMR-EH56 (AV3/AV4 - RCA) - DVB-C receiver (VCR) via Scart / RCA adapter)
Please use the link vollbeschaltete 21-pin Scart cable with individually shielded signal lines. In the menu of the DVD recorder to function -> far. Features -> Setup -> Connection set the AV1 output to RGB please. In AV2 settings set the AV2 input please on the appropriate signal (RGB, S-video or video), which of your DVB-S receiver output.
If you use an external device (eg receiver) are some limitations to consider. For example, you can not Channel takeover of your receiver working, the Direct TV Recording Guide Pros and the system does not qualify. This feature allows you solely in connection with use of analog cable reception.
For a recording of your DVB-S receiver to the DVD recorder, select s.TH-37PV60 the AV3 connection through the TV to AV button. Then press the yellow color. On DVD recorder, select the AV2 input using the Input Select button on. A2 then appears on the display of the DVD recorder.
For a recording of your DVB-C receiver to the DVD recorder, select s.TH-37PV60 the AV3 connection through the TV to AV button. Then press the yellow color. On DVD recorder, select the AV3/AV4-Input using the Input Select button on. A3/A4 appears in the display of the DVD recorder.
To view a DVD or
the recording of the DVD recorder on the TH-37PV60, select s.TH-37PV60 turn to AV3 input.
Do you only a representation of your DVB-S receiver, select s.TH-37PV60 the AV1 input via the button at TV/AV-. Then press the red color on the remote control.
Do you only a representation of your DVB-C receiver, select s.TH-37PV60 the AV2 input using the button to TV/AV-. Then press the green color on the remote control.
Wr Hofen provide
you with this information and have helped to verbeiben
