Frage von michigrunf:
Hello,
I came to in the title referred to Camera.
However, I have no idea what you start with their outputs can be. It has a single output with BNC Male and a 14-pin Male (possibly Blackburst?).
I am glad about every hint.
The camera has no way, Recorder.
Antwort von thos-berlin:
If I am not very mistaken, then this is a 3-tube camera. In their time used in the Camera and outdoor use in smaller studios.
The 14-pin connector used to connect a VCR with the signal and power supply.
The BNC connector is the analog video output (CVBS). ME should be further Camera Connections, such as a 4-pin XLR connector, with the camera with the 12V supply voltage can be.
Actually, the existing connections sufficiently labeled.
Edit:
So, I did look at the back of a 320 Ky compatriots. The three BNC connections for video - Out, Genlock and Test. In addition to the 14-pin connector for the recorder and a 4-pin XLR for Stromvesorgung.
I think, in the 210 is just there .....
Antwort von michigrunf:
First, many thanks for the reply.
In the 210 is it's like for the 320th
The real problem is that I do not know what I am with these outputs can begin. I would prefer the digital picture signal is of course to make it then s.PC further. At the time I would make a composite and a component video input s.PC available, does that accomplish anything?
Antwort von thos-berlin:
This camera has only analog connections. The BNC Video - Out can be connected directly with a CVBS input (composite, usually RCA) s.PC connected.
Otherwise this would be the use of an AD converter (z.. B. Canopus, Datavideo) to ponder, since one with a simple kind of like a sound synonymous with aufnhemen can (the remains synonymous synchronously) and the Egebnis is a DV file how synonymous after the capture of a DV camera is available.
Antwort von videojoe:
This is schonmal super, I have a BNC to RCA adapter gebastelt and had thus a Picture s.Television. However, the three colors to each other in their position, especially the red, the same can be synonymous in Viewfinder recognize, as I now noticed. The front camera has a switch yet, apparently a test image with several colors outputs, which are synonymous with the television programs present. Therefore, I now suspect that something of the optics must be slipping. I still have a chance to get added back?
Antwort von thos-berlin:
I do not know. The camera, which still stands with me (the 320er), had a production of on-site and which can be synonymous with their needs in metrology adjust.
If one side of the casing opens, there are many controls ....
If you come s.Unterlagen perhaps you can make what. Whether a professional technician 'worth, I do not know ......
Antwort von michigrunf:
Hello again,
I have now made some progress:
1. The 14-pin cable
Under
http://cgi.ebay.com/JVC-RS-500-Remote-Camera-Control-Unit_W0QQitemZ230215210812QQcmdZViewItem?IMSfp=TL080121108a18961 one finds the appropriate device for the camera.
The two composite outputs are clear. I'm particularly interested in the four BNC connectors in the field "Without Sync. Give it a component signal, which is a higher quality?
Then the device still has various knobs. Are they interesting or can be synonymous everything s.der Camera directly regulate?
2. Calibration
The Camera is now open and there were a lot of pots to light. Fortunately, a legend in the side stuck. My problem is that each color is not on top of each other, so you always see three images. Especially red differs greatly from. Here are the legends:
http://ghsabine001.gh.funpic.de/Cam/Legende1.jpghttp://ghsabine001.gh.funpic.de/Cam/Legende2.jpg I suspect that the alignment controller s.unteren edge of Legend 1 the right ones.
Antwort von thos-berlin:
For 1)
The remote control is in my opinion: on a 26-pin connector with the connected camera. Kameraseitig is still behind a studio adapter, ede the counterpart to this 26-port polishing licensed as well as other connections for studio operation, for example: the intercom connection.
The rule options s.der RCU serve hauptsichlich to an otherwise properly adjusted in the Camera Mehrkameraberteieb of a one point (camera control room) s.die adapt other cameras. The betriffet usden White Balance and the aperture (in the sense of a remote control). In addition, further Möglichkeinten, such as the connection of the intercom system, the red light camera (Tally) and the attitude of the cable length.
In addition, of course, the power de Camera.
Your camera would be synonymous without the use of RCU.
2) Maybe take a measurement but wonder? ....
