Frage von boecki1:
I've made America a CCD worried Cam (PAL) with the following technical data:
# Image Device: SONY 1 / 3 "SUPER HAD CCD
# Effective Pixels: PAL / 752 (H) x 582 (V) 440K
# Total Pixels: PAL / 795 (H) x 596 (V) 470K
# Sync System: Internal
# Horizontal Resolution: 520 TV Lines
# S / N Ratio: More than 50dB
# Low Lux Sensitivity: .1 Lux / F2.0 (@ 30 IRE)
# White Balance: Auto
# Gain Control: Auto
# Back Light Compensation: Auto
# Electronic Shutter: PAL 1/50-1/50, 000sec Auto
# Video Output Level: 1.0 Vp-p (75 Ohms, Composite)
# Power Supply: DC 12V (± 10%)
All I then s.meinen Archos 404 CC connected via mobile DVR station (actually only one AV input). The Archos is characterized as AVI to (640 * 480 at 30fps).
If I use the camera via USB TV Stick with AV in I then synonymous following errors:
There are horizontal stripes (see picture).
When the Camera s.einen "old" tube TV is connected, the strips are not there!
Has anyone an idea how to use these strips removed or why this is?
Picture: http://img132.imageshack.us/done.php?l=img132/8950/streifenme4.jpg
Antwort von tommyb:
So it usually helps more the type of call, less the technical characteristics of the manual method. The first,.
I do not know what your TV USB stick does, but perhaps he does exactly the same as your Archos cheese: it takes your incoming signal is from, but converts it so it suits him (with PAL 50 fields will be 640x480 with 30 frames).
If your TV the picture correctly, then it is most likely s.den other devices you use or your television is a "bad" signal of the Camera and corrected it (I find terribly unrealistic).
Antwort von boecki1:
The CCD cam is only a "Lens" with RCA video output, so no "real" camera in the sense.
