Infoseite // Camcorder with external monitor screen monitor?

Frage von NTedelkraut:


Hello,
how is it possible the picture of a camcorder from a distance on an external monitor to monitor? Radio routes probably come to me no question, because something probably far too expensive. Do such systems, however, found nowhere and do not know how much they really cost.

I think that is why more s.eine cable connection. S-video cable, I have to 20m long, Found. Is that even the ceiling? Is there a solution to greater distances to be bridged? What about distance, I can achieve? Vllt using multiple cables together? Is there some kind of signal amplifiers, which one can switch between?
And what a monitor is in question? The important thing is that I do not need power. As so often, should the entire stay as cheaply as possible.

I would be grateful to you if someone in this time stating his experience. Write what you will mind!

It is said as to the mere control of the image, ie image quality is absolutely secondary. Only a temporal displacement would be detrimental. Sound transmission plays no role.

Nico



Antwort von tv-man_sh:

Y / C signal pathways (S-VHS) of more than 5 meters are quite critical. The best composite (both BNC, RG59 Type). As a monitor, I recommend the classic Now SonyPVM 9041/42/44 (or see models of these devices group, synonymous with Batteries NP-1-type to operate). NP-1-Charger + Batteries are used effectively synonymous. 100 meter video cable available at Ebay zTs30 EUR.



Antwort von Markus:

"NTedelkraut" wrote: S-video cable, I have to 20m long, Found. Is that even the ceiling?
No, not generally. The bigger the cable route, the greater is the influence of the cable quality. Longer cable therefore disproportionately more expensive than shorter. I have been 50 meters longer and with Y / C signals and the back has worked fine (video Pínanson Multicore).

"NTedelkraut" wrote: As so often, should the entire stay as cheaply as possible.
As you described in the text have that quality plays no role and only the image should be checked, as would a favorable composite cable from the field of video surveillance in question. That gives it the role of up to 100 m and a possible loss of signal then synonymous plays no role. Male solder you either take off or a ready made up with additional BNC- Cinch -Adaptern.

"NTedelkraut" wrote: BNC- Cinch -Adaptern.

And what a monitor is in question? The important thing is that I do not need power. BNC- Cinch -Adaptern.


This could leave a random Television assume that of a large, fully charged car battery via an inverter / voltage converter is fed. All are conveniently located in the trade.



Antwort von NTedelkraut:

Thank you both, which helps me super schonmal next! It is therefore also a composite cable. What are the monitor werd nochmal I get a search to find handy.

To signal loss: How is the voice? Do I have time but with versezten images reckon?



Antwort von -ssSonyY-:

Portable DVD player with AV-in (then all you need is more a jack-RCA Male ..., if not already an RCA is

http://www.kabelmeister.de/gfx/shop/artikel/4151.jpg

or a LCD Television (also as above)



Antwort von Markus:

"NTedelkraut" wrote: To signal loss: How is the voice? Do I have time but with versezten images reckon?
A signal loss is reflected primarily in the brightness of the image (it is using brightness and contrast controls to compensate). In periods of adverse signaling pathways (eg, video cable alongside power cables relocated) there is a litter, like a television can be sub-optimal ( "50 Hz hum).

A maturity difference you will not notice, that is when the camera pans, changing at the same time synonymous Control Your picture.



Antwort von caballeras:

Hello Nico,

I think you want with your building so achieve something similar as this, which I already synonymous for a while herumprobiere. If you like, you share with me, write at times

Lleras (ätt) gmx.de

(Anti-Spam, @ sign please insert itself).

Cast

C.

Mal 'ne s.alle question: Is this forum's in something like Personal Messages (PNS)? I have found nothing.



Antwort von Markus:

"caballeras" wrote: There's something in this forum as Personal message (PNS)?
No, there is no PM function. If a user wishes to contact someone with his record, then it must be an email address in his profile.
_________________
Sincerely,
by moderator