Frage von subs93:
Hi,
I have recently Canon Hf-100 increased. When I record is s.der front of the no light on. Is it the way I know of other models, which is always a red lamp is concerned, when I record.
Gruss
Antwort von Shiranai:
Yes this is so. At the front is synonymous only the LED night light, the matter could and that would be a bit annoying :-)
Antwort von r.p.television:
Really?
A complete waiver of the tally lamp that would mean, for example when working with remote control and even display folded can not control whether the camera is running or not .... (for example, in automobile assembly to dashboard or worse Camera unattainable s.einer Alutraverse in 5 meters height)
Since the end s.falschen was again saved.
Antwort von subs93:
Hello,
when I finish the recording and the LCD of the device close, the device remains in standby and does not switch from auto. Do I always press the power button to turn off the unit? For Panasonic sd-9 switches the device from car, when I close the LCD.
Gruss
Antwort von DocGravity:
That with which you can stand at the settings in the menu.
I think means "quick". As can then change the time, how long stays in standby mode before it switches off.
If you aufnimmst, then flashes the "Access / CHG" light every few seconds.
Antwort von subs93:
Hello,
I've found it, but you can choose between 10, 20 or 30 minutes to choose to turn off the camcorder. That is far too long, so synonymous is the battery is empty, not as well resolved.
Antwort von studiosale2:
... life is so infinitely hard :-)
