Frage von KerstinB:
Hello,
Attempts since days XLR microphones s.einer Canon XL 2 to operate. My two microphones (RODE NTG-2 and Behringer C 1) showed no synonymous differences and Level XLR cable already tried.
1. Is it something in the menu may be understood, that leads to XLR book not do?
2. If the XLR theme somehow test?
Besten Dank für ne answer.
Kerstin
Antwort von Johannes:
Hello,
XL1S when there was such a menu in the "field" where one has made of where the sound comes what input you want to take. Where you exactly this submenu you will find the manual say.
You could test the mic if they go. Clasp it with an XLR jack adapter s.den port by the Japanese (3.5 mm), the Mics. do you know it is s.den XLR inputs. And then s.besten to the workshop.
Antwort von Meggs:
Manual S 47:
Recording on the XLR connectors
1. Connect a Microphone s.die XLR jacks.
To create a Microphone on phantom power supply, set the +48 V switch to ON. Close
Before you turn on the phantom power first to the Microphone, and let it cut off
the phantom power supply.
2. Set the INPUT SELECT switch to REAR.
3. Set the REC CH SELECT switch to CH1 or CH1 CH2.
The two mics you need to use phantom power.
Antwort von KerstinB:
Thank you for the copy of the manual - the manual is not particularly deep, but it is still opened in front of me.
As for the Rhode Microphone is concerned: it works synonymous with no phantom power - but it is synonymous with.
Antwort von KerstinB:
If the XLR jack somehow check - with a multi meter for example?
(wanted to suggest that the microphones work ...)
Thanks for the tip
Antwort von Meggs:
Thank you for the copy of the manual - the manual is not particularly deep, but it is still opened in front of me. If you want to say that it does not work, although you orders as described in the manual? I think at least in this point the manual goes far enough. Since everything is what it is to say there.
As for the Rhode Microphone is concerned: it works synonymous with no phantom power - but it is synonymous with. The RODE NTG-2 requires either 48V phantom power or ne 1.5 V Battery. I would take out the battery when phantom power is applied.
Antwort von judgement movie:
for Manual:
If there is x or y and it is not explained to me what benefits the x and y has, I think the superficial. Example: You can super-normal or refuel. Super is expensive and takes maybe a little more power. Normal is cheaper and is sufficient in the full spec 95 RON.
Verge: Set the REC CH SELECT switch to CH1 or CH1 CH2.
But to your question:
Yes - I do as described in the manual.
Even with the battery - which I suppose at 48 V out.
No sound.
This means you do not know how to XLR jacks can examine?
VG
Antwort von Markus:
You do not know how to XLR jacks can examine? It is basically very simple: If you have already been confirmed that the microphone is working properly and the same is true synonymous onto cable, then it can only s.Camcorders lie. An objective test means multimeter is synonymous to me, however, not known.
Left are only two possibilities: The manual audio control is at zero or the camcorder has a defect. The former can also be easily ruled out.
Antwort von Meggs:
This means you do not know how to XLR jacks can examine?
Dear "VG" alias "host" aka "KerstinB"
we examine the s.einfachsten in which a functioning micro dranhängt and after manual approach. Further tests require expertise in the specific case obviously does not exist.
Antwort von KerstinB:
At zero - oh it's not?
Joking aside:
Then I have to really specialists.
Thanks for the tips. I had hoped that some Canon Vodoo there, because the duty to rectify.
Antwort von KerstinB:
VG = Many greetings / no Alias | Wavefront Maya
Thanks for the compliment 'expertise does not seem to exist. "
My question was aimed, if someone can tell me how to examine XLR jacks. You obviously are not synonymous.
Nevertheless, thank you.
You know: Ms. s.Steuer! And still blond synonymous.
Antwort von DrLanselius:
Moin! The XL2 I do not know when my XH A1 is the XLR connector however s.Werk dead and in the menu must be activated. What the Manual s.einer completely different place mentioned. Good luck.
DrLanselius
Antwort von Meggs:
I had hoped that some Canon Vodoo there, because the duty to rectify. Gibts. The camcorder should be on.
Antwort von KerstinB:
I had hoped that some Canon Vodoo there, because the duty to rectify.
Gibts. The camcorder should be on. Wedding film!
Antwort von Meggs:
My question was aimed, if someone can tell me how to examine XLR jacks. You obviously are not synonymous. http://de.wikipedia.org/wiki/ XLR
You can measure what comes out, so the +48 V phantom power Also can the resistance measured between the poles.
If one notes that between the poles of a short circuit exists, or that no phantom rauskommt what do you do then? To access screwdriver and unscrew the part? I would not do.
One can but bad measure what happens with the signal that goes inside. According to the XLR jacks, the preamp, then the AD converter, etc..
Antwort von nomulus:
as is expected because the facts and how it has solved?
