Frage von aaVe:
Hi,
I have the Canopus advc110 fetched, but if I then between pc via firewire and analog camera switch, both blue glow lamps (analog & digital). Also, I can, because when times illuminates only a coincidence, not of analogue to digital switch, or vice versa, but instead go back to both lamps. the device is broken or is it somewhere else on it (achja: if I like capturing in premiere will come just as annoying green stripe and a snapshot of previously played videos, so flicker. is synonymous with the video playback in winamp, PowerDVD or mediaplayer of the case) I hope you can help me as I get back into proper order or the Canopus I possibly can to send back.
mfg aave
Antwort von Markus:
Hello,
if you get the buttons for longer Analog-/Digital-Choice hit, shine on both status indicators and it will s.analogen output a test image made.
The fact that the other functions so funny react could with the setting of DIP switches on the underside have to do. What is there with you from?
See synonymous (post 2):
Position of DIP switch s.ADVC-110
Antwort von garrycofee:
in my dipswitch, it looks for all except the 6th in OFF position. you said something of press button for more: if I connect device s.den flow, is analogous bright. when I use the button shortly, but both are lit. how do I get this "testbild condition" out again, that only one lamp is burning?
mfg aave
Antwort von Markus:
Leave me something about ... for a moment both status display lights up when one of analog switches to digital or vice versa. But listen again and then lit on only the other display.
How did you get the ADVC-110 as connected? About Firewire 6-pol./6-pol. So that the A / D converter directly from the computer with power is? Or did you have a 6/4- or 4/4-poliges firewire cable and an external power supply in use?
Power of computer
and power supply remain dear lass!
how do I get this "testbild condition" out again, that only one lamp is burning? Selection button a few seconds. But that is synonymous in the manual. ;-)
Antwort von garrycofee:
I have power supply of computer ONLY.
So once more precise: I have camera connected with Canopus. I then put the Canopus in the pc so that it gets power. then illuminated for 2 seconds both lamps in blue, then only the analog. when I of analogue to digital chances wants short press: then lit digital AND analog. s.dann I can press the button as I want, nothing happens .... more
mfg aave
Antwort von Markus:
In this case, the device is apparently defective.
Claim it!
Antwort von Marco:
Do you have any Firewire ports s.beiden ADVC of a cable / device dranhängen? Then disconnect one of them times.
If I s.beiden interfaces dranhängen did what comes at me this faulty LED display as well.
Marco
Antwort von aaVe:
So once again an accurate description:
if I am under the dip-switch position (1 = OFF 2 = OFF 3 = OFF 4 = OFF 5 = OFF 6 = ON)
the unit, then burn the first 2 seconds both lights (analog and digital) BLUE! Then the status lamp burns for approximately 0.5 seconds ROT. After these 2 seconds to burn only the analog. so when I capture with movie maker (not IMMOMENT premiere runs correctly, but again I will open an extra thread must not only because the premiere is concerned ... so then I can capture with movie maker, everything runs as it should be synonymous. ... just hold the control device is not ...
mfg aave
Antwort von Dongball:
Do you have the possibility of the device s.einem other PC to test?
Maybe you're just the "worms" in the system ... Your premiere spins synonymous yes;)
Should there s.einem other computer work, you have the error schonmalstark limited.
Antwort von aaVe:
my father takes the time tomorrow gets to work with ... s.den and other pcs in the home, there is no firewire ^ ^ but well tomorrow I find out more, thank you in advance for all the good tips! :)
mfg aave
Antwort von prem:
The device is out. Happens more often with these things. A buddy of hers I had to repair 3 times.
Antwort von aaVe:
well thanks for the tipp werd ichs then probably need to replace ...
mfg aave
Antwort von Markus:
Happens more often with these things. A buddy of hers I had to repair 3 times. So I do not have a broken. Many users make the mistake that they are sensitive, touching electronic devices, without first ground. And with several thousand volts (electrostatic charge) to get everything broken: A / D converter, computer interfaces, camcorder connections, ...
Antwort von aaVe:
Hi,
also with the electrostatic discharge will probably have nothing to do because I am with the device very carefully bin (or even synonymous go, the retailer now has a 2 to off comparatively).
but we will in the next few days to see if the equipment arrives ... s.gerät whether it was or just s.irgendetwas other things ...
mfg aave
